Hinkley Lighting FR42645SLF User Manual
CELESTE
FR 42 64 5S LF
Bulbs: 60 w canD. Replace ment Parts: GLASS: R42640gl CRYSTAL: R42640CRY
A S S EMBLY INSTRU C T I ONS
Assembly of this fixture will be accomplished by first assembling the main body,
installing the mounting hardware to the junction box, making all necessary electrical
connections, hanging the fixture and then attaching the fixture glass.
SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]
and any additional directions. Turn power supply off during installation. If new wiring
is required, consult a qualified electrician or local authorities for code requirements.
ST E P 1
1 Spread out arms (a) on lower body (1) until they are approximately 72 degree
apart - See Drawing 1.
2 Slip secondary arm assembly (2) along wire and onto main body (1), and
spread arms (b) apart until they are equally spaced over lower arms (a).
3 Slip center column (3) along wire and thread onto coupler (c) on top of main
body (1).
4 Attach top of arms (b) to center column (3) using ball knob studs (4).
5 Slip loop (5) along wire and thread onto top of center column (3).
6 Thread decorative finial (6) onto bottom of fixture.
7 Crystals (9) can now be threaded onto the end of the stems (d).
8 Fixture can now be installed.
[DRAWING 1]
5
4
d
3
2
c
1
b
9
8
7
e
S T E P 2 Refer to Hanging Instruction Sheet [FRIS19] to hang fixture. Then refer back
to this sheet to continue installation of this fixture.
ST E P 3
1 To install glass (7), slip glass over socket (e).
2 Slip candle sleeve (8), ringed end down over socket (e) making sure end of candle
sleeve passes throught hole in glass so flat ring holds glass in position.
a
6
8 00 .42 1. 35 17 W WW. FR ED RI CK RA MO ND. CO M
7.1.08
Loading...