Page 1
MONTEREY
fR 42 50 6B ME
Bulbs: 6- 60W CAND . Replace ment Parts: GL ASS: R4 2506SH
A S S EMBLY INSTRU C T I ONS
Assembly of this fixture will be accomplished by first assembling the body of the
fixture, installing the mounting hardware to the junction box, making all necessary
electrical connections, hanging the fixture and then installing the fixture glass.
SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]
and any additional directions. Turn power supply off during installation. If new wiring
is required, consult a qualified electrician or local authorities for code requirements.
S T E P 1
1 First gentle fold out the arms (a) until they are equally spaced 60 degrees
apart -
2 Fixture can now be installed, please return to this section to completer assembly
after installation.
ST E P 1 Refer to Hanging Instruction Sheet
to this sheet to continue installation of this fixture.
See Drawing 1.
[FRIS19] to hang fixture. Then refer back
ST E P 2
1 Slip candle sleeve (2) over socket (1) - See Drawing 2.
2 Slip shade (3) onto top of candle sleeve (2).
Thread ball knob / finial (4) onto end of stem (5) and tighten to secure part (4).
3
Making sure part (4) is parallel with two opposing arms.
Fixture can now be lamped accordingly.
4
[DRAWING 1]
[DRAWING 2]
3
2
1
a
5
4
8 00 .42 1. 35 17 W WW. FR ED RI CK RA MO ND. CO M
01.01.11
Loading...