Hinkley Lighting FR41947PAL User Manual
KARMA
FR 41947
Bulbs: 60 W CAND .
A S S E M B LY INSTRU C T I O N S
Assembly of this fixture will be accomplished by first,
attaching the mounting strap to the junction box, making all necessary
electrical connections, and hanging the fixture from the wall.
SAFETY WAR NI NG: Read wiring and grounding instructions [FRIS 18]
and any additional directions. Turn power supply off during installation. If new wiring
is required, consult a qualified electrician or local authorities for code requirements.
STEP 1
1 Attach mounting plate (a) to junction box (j) rim side away from the wall, with screws
(b) provided - See Drawing 1.
2 Make all wiring connections following instruction sheet (FRIS 18) provided.
Please follow all necesary precautions.
3 After all connections are made, slip canopy (c) over mounting plate (a) and hold
in poistion while tightening screws (d). NOTE: As screws (d) are tighten canopy
will move backward and tighten up against the wall.
4 Installation is complete and fixture can now be lamped.
5 If mounting to the wall follow same procedures as outlined above.
[DRAWING 1]
j
a
c
d
b
d
STEP 2
1 Fixture can be lamped accordingly at this time.
01.01.13
Loading...