Page 1
FREDRICK RAMOND
FR32905BKS
ASSEMBLY INSTRUCTIONS
*** The construction of this fixture will be accomplished by first making all necessary
electrical connections, hanging the fixture from the ceiling, and then installing the glass.
SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]
and any additional directions. Turn power supply off during installation. If new wiring
is required, consult a qualified electrician or local authorities for code requirements.
STEP 1
1. Please refer to the hanging instruction sheet (I.S. 19-35) provided to continue
installation of this fixture. Then refer back to this sheet to install glass.
STEP 2
Make electrical connections from supply wire to fixture lead wires. Refer to
instruction sheet (I.S. 18) and follow all instructions to make all necessary wiring
connections. Then refer back to this sheet to continue installation of this fixture.
STEP 3
1. Fixture can be lamped accordingly at this time.
2. To install glass, slip glass up through bottom of cage assembly and over candle
sleeve (1) and into glass holder (B).
[DRAWING 1]
2
1
6.1.12
Loading...