Hinkley Lighting 5853 User Manual

Drawing 1 - Fixture Mounting

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

C

D

A

F

F1

E

B

assembly instructions

5853

Family: Abbie Item No. 5853

J

1. Find a clear area in which you can work.

2. Unpack fixture and glass from carton.

3. Carefully review instructions prior to assembly.

*** The construction of this fixture will be accomplished by first attaching the
mounting strap to the junction box, making all necessary electrical connections,
mounting the fixture to the wall, and then installing the glass.

start here

Drawing 2 - Glass Installation

3

2

1

5

1. Prepare mounting strap (A) by threading 1-5/8” nipple into the center hole of the

mounting strap (A), approximately 1/4“.- see Drawing 1.

2. Attach mounting strap (A) to junction box (J) using two 1” screws (C) provided.

3. Slip lock washer (F1) over nipple (C) and thread hex nut (F) onto nipple (C).

4. Hex nut (F) can be tightened against mounting strap (A) after adjusting nipple (C) to

proper mounting lengths.

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

Make electrical connections from supply wire to fixture lead wires. Refer to instruction
sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.
Then refer back to this sheet to continue installation of this fixture.

1. To mount fixture, slip center hole of backplate (E) over nipple (C) and hold fixture in
position - see Drawing 1.

2. Thread decorative knob (D) onto end of nipple (C) and tighten to secure fixture.

1. To install glass, remove socket ring (3) from the socket (1) - see Drawing 2.

2. Slip glass (2) over socket (1).

3. Thread socket ring (3) onto socket (1) and tighten.

4. Fixture can now be lamped accordingly

Note: Maximum wattage for 5853 fixture is 100 watts per bulb.

5.3.10