Hinkley Lighting 5251 User Manual
Drawing 1 - Strap Detail
assembly instructions
5251
Family: Pinnacle Item No. 5251
B
gull wing
bracket
Drawing 2 - Fixture Mounting
(side view)
J
A
B
C
1
D
F
Drawing 3 - Glass Installation
B
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first mounting the
mounting strap to the junction box, making all necessary electrical connections,
hanging the fixture from the ceiling, and then installing the glass.
1. Prepare gem strap (A) for mounting by threading two screws (B) provided into
back of gull wing bracket of gem strap (A) - see Drawing 1.
2. Be sure the holes into which the screws are threaded match the spacing of holes (D)
in the ceiling pan (1) - see Drawings 1 and 2.
3. Mount gem strap (A) to junction box (J), using the two 1” screws (C) provided.
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
start here
1
6
Make electrical connections from supply wire to fixture lead wires. Refer to instruction
sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.
Then refer back to this sheet to continue installation of this fixture.
2
1. Hang the fixture by slipping the holes (D) in the ceiling pan (1) over the screws (B)
in the mounting strap (A) - see Drawing 2.
2. Thread on ball knobs (F) to secure fixture to the ceiling.
3
4
H I N K L E Y L I G H T I N G 12600 Bere a Road Cleveland, OH 44111 800.446 . 5 5 3 9 / 2 1 6 . 6 7 1 . 3 3 0 0 w w w. h i n k l eylighting.com
1. To install glass, thread stem (2) approximately 1/4” into coupler (6), located in the
center of ceiling pan (1) - see Drawing 3.
2. Fixture can now be lamped accordingly.
3. Slip glass (3) onto stem (2) and up against ceiling pan (1). Hold in position.
4. Thread knurl nut (4) onto stem (2) and hand tighten to secure glass in place.
5. Thread bottom finial (5) onto end of stem (2) and hand tighten.
Note: Using a tool to tighten these items could cause glass damage.
Note: Maximum wattage for 5251 fixture is 60 watts per bulb.
12.30.08
Loading...