Hinkley Lighting 4970BN User Manual

Drawing 1 - Fixture Mounting

assembly instructions

4970

Family: Midtown Item No. 4970 BN

C

D

A

F

F1

E

Drawing 2 - Glass Installation

B

2

J

1. Find a clear area in which you can work.

2. Unpack fixture and glass from carton.

3. Carefully review instructions prior to assembly.

*** The construction of this fixture will be accomplished by first attaching the
mounting strap to the junction box, making all necessary electrical connections,
mounting the fixture to the wall, and then installing the glass.

1. Prepare mounting strap (A) by threading 1-5/8” nipple into the center hole of the
mounting strap (A), approximately 1/4“.- see Drawing 1.

2. Attach mounting strap (A) to junction box (J) using two 1” screws (C) provided.

3. Slip lock washer (F1) over nipple (C) and thread hex nut (F) onto nipple (C).

4. Hex nut (F) can be tightened against mounting strap (A) after adjusting nipple (C) to

proper mounting lengths.

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

start here

Make electrical connections from supply wire to fixture lead wires. Refer to instruction

1

5

HINKLEY LIGHTING 12600 Berea Road Cleveland, OH 44111 800.446.5539 / 216.671.3300 www.hinkleylighting.com

sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.
Then refer back to this sheet to continue installation of this fixture.

1. To mount fixture, slip center hole of backplate (E) over nipple (C) and hold fixture in
position - see Drawing 1.

2. Thread decorative knob (D) onto end of nipple (C) and tighten to secure fixture.

1. Fixture can now be lamped accordingly.

2. Slip glass (1) over socket and into glass holder (2)- see Drawing 2.

Note: Maximum wattage for 4970 fixture is 100 watts per bulb.

4.28.10