Hinkley Lighting 4868BN User Manual

Drawing 1 - Arm Spacing

assembly instructions

4868

Family: Piper Item No. 4868

start here

A A

A

A

A

A

Drawing 1 - Fixture Assembly

2

A

1. Find a clear area in which you can work.

2. Unpack fixture and glass from carton.

A

3. Carefully review instructions prior to assembly.

A

A

1

B

*** The construction of this fixture will be accomplished by first assembling the
main body of the fixture, making all necessary electrical connections, hanging
the fixture from the ceiling, and then installing the glass.

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

1. Rotate arms (A) until they are approximately 60 degrees apart - see Drawing 1.

2. Please refer to hanging instruction sheet (I.S. 19) provided to hang this fixture.

Then refer back to this sheet to install reflector plate and glass.

1. To install reflector plate (1) slip stud into keyhole slot (B) and slide downward.

2. Fixture can now be lamped accordingly.

3. To install glass (2) slip bottom of glass over locator plate (C).

4. Fixture is complete.

C

A

H I N K L E Y L I G H T I N G 1 260 0 Be rea Roa d Cl eve la nd , OH 4 411 1 800. 44 6.5 53 9 / 2 16 .671 .3 300 www. hink le yli gh ti ng.c om

Note: Maximum wattage for 4868 fixture is 100 watts per bulb.

06.01.11