Hinkley Lighting 4595RY User Manual

Drawing 1 - Assembly

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

assembly instructions

4595

Family: Dunhill Item No. 4595 RY

72 degrees
apart

Drawing 2 - Glass Installation

1

3

2

start here

1. Find a clear area in which you can work.

2. Unpack fixture and glass from carton.

3. Carefully review instructions prior to assembly.

*** The construction of this fixture will be accomplished by first assembling the
main body of the fixture, making all necessary electrical connections, hanging
the fixture from the ceiling, and then installing the fixture shade.

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

B

A

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

1. To assemble main body, spread arms (A) located on the main body assembly (1),
until they are equally spaced 72 degrees apart - see Drawing 1.

2. Slip loop (1) along wire and thread onto threaded tube (B).

3. Please refer to the hanging instruction sheet (I.S. 19) provided to hang fixture. Then

refer back to this sheet to install shade.

C

1. To install shade, slip candle sleeve (2) over socket (C) - see Drawing 2.

2. Slip candle cap with shade (3) over top of candle sleeve (2).

3. Fixture can now be lamped accordingly.

4.9.10