Page 1
Drawing 1 - Assembly
assembly instructions
4225
Item No. 4225
72 degrees
apart
Drawing 2 - Glass Installation
A
1
2
slip end of
socket tool
over ring
4
3
start here
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling the main
body of the fixture, making all necessary electrical connections, hanging the fixture
from the ceiling, and then installing the glass.
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. To assemble main body, spread arms (A) located on the main body assembly (1), until
they are equally spaced 72 degrees apart - see Drawings 1 & 2.
2. It may be necessary to adjust scroll (S) after arms are moved into position, so they are
centered on the arm.
3. Please refer to the hanging instruction sheet (I.S. 19-92) provided to hang fixture.
Then refer back to this sheet to install glass.
B
S
HINK L E Y LIGHTING 33000 Pin Oak Parkway Av on Lak e, OH 44012 8 00 .4 46.5539 / 4 40.6 53 .5 500 hinkl eylig ht in g.com
1. To install glass first remove socket ring (4) and socket spacer (3) from socket (B) - see
Drawing 2.
2. Slip glass (2) over socket (B).
3. Slip socket spacer (3) over socket (B).
4. Thread socket ring (4) onto socket (B) using socket tool provided.
01.01.13
Loading...