Hinkley Lighting 4068VZ User Manual
Drawing 1 - Arm Spacing
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com
assembly instructions
4068
Family: Lauren Item No. 4068
start here
51.5˚
Drawing 2 - Fixture Assembly
1
B
2
A
1. Find a clear area in which you can work.
2. Unpack xture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this xture will be accomplished by rst assembling the main body
of the xture, making all necessary electrical connections, hanging the xture from the
ceiling, and then installing the glass.
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. Rotate arms (A) until they are approximately 51.5 degrees apart - see Drawing 1.
2. Slip loop (1) along wire and thread onto tube (B) at top of center column (2).
3. Slip candle sleeve (3) over socket (S).
4
3. Please refer to hanging instruction sheet (I.S. 19) provided to hang this xture.
Then refer back to this sheet to install glass.
3
S
GH
1. Fixture can be lamped accordingly prior to installing the glass.
2. To install glass (4) slip glass through ring and make sure base of glass seats
properly in glass holder (GH) - see Drawing 2.
01.01.12
Loading...