Hinkley Lighting 1542 User Manual

1542BZ

1546BZ

Drawing 1

Drawing 2

Mounting Instructions

Family: 12v Series Deck Light Item No. 1542BZ/1546BZ

1. Locate drilling template (page 2) and attach to area to be drilled (1).
Drill four #39 pilot holes (A) according to dimensions on template.

2. Cut a 3-1/8” long x 2-1/16” wide center opening for fixture housing.
Reference Drawing 3 (not to scale).

3. Ensure all wiring is completed according to NEC electrical code. Make
appropriate wire connections to supply wire using connectors rated for
the desired location.

4. Slide fixture assembly into opening and attach using four No 8 x 1”
long wood screws (B) (not provided).

5. You may now install the lamp into fixture.

6. Attach fixture face (C) to housing using the supplied No8-32 Philips
head screws (D) provided with fixture.

Hole orientation in mounting surface

for 1542BZ for 1546BZ

Drawing 3 (not to scale)

3 5/8"

Back of Fixture

3 1/8"

Drilling Template for 1546BZ

Full Scale

2 1/4"2 1/16"

3 1/8"

2 1/4"

Back of

Fixture

3 5/8"

2 1/16"

Drilling Template for 1542BZ

Full Scale