HINEX MRO HS 2018 Users manual

Forklift Alarming System V9.1

Forklift Alarming System V9.1

Table of Contents

Part I. Installation Instruction

1. Wiring Diagram …………………………………………………………………………………..… 2

2. Components List ..…………………………………………………………………………………. 2

3. Main Components ………………………………………………………………………….….…... 3

4. Installation Instructions……………………………………………………………………………… 3

4.1 Host ……………………………………………………………………………………………… 3

4.2 Pedestrian Tag (P-tag) ………………………………………………………………………… 4

4.3 Alarm Flash Light and Audio Speaker …………………………………………………….…. 5

4.4 Installation Illustration ……………………………………….…………………………………. 6

Part II. Operating Manual

1. Technical Data ...………………………………………………………………………………..….… 9

2. Host .…………..………………………………………………………………………………….……10

3. P-tag ………………………………………………………………………………...…………………10

4. Alarm Audio Speaker ……………………………………………….…….………………………….11

5. Alarming distance at various forklift speeds …………………………….………………………....11

6. Troubleshooting …………………………………………………………….…………………………12

Page 1

Part I. Installation Instructions

1. Wiring Diagram

2. Components List

1) Host: 1 set

2) Host Installation Components: metal plates (2 pcs); M6X106 Screws (4 pcs); M6X70 Screws (4 pcs)

3) P-Tag: 4 sets

4) Circular Velcro sticker used for sticking P-Tag on helmet: 8 sets

5) Components for P-Tag installation on vest: plates (4 pcs); Screws and nuts (4 sets)

6) Velcro Band used to tie the P-Tags on arms or wrist (4 pcs)

7) P-Tag AC/DC Adapter: 4 sets

8) P-Tag AC/DC Adapter cables: 4 sets

9) Host power cable switch Velcro: 2 pcs

10) Alarm flash light and audio speaker: 1 set

11) Alarm installation components: metal plates (2 pcs); Screws (2 sets); Screw Key (1 pcs)

12) This manual

Page 2

3. Main Components

Host Power Cable

P-Tag Alarm Flash Light & Audio Speaker

P-Tag AC/DC Adapter Power Cable Switch

Installation Notes:

* Please note that ONLY a qualified technician may install this Alarming System.

* All installation and operating instructions should be followed per the manual.

* During installation, please do not damage the system by using electric drill, electric saw and other

tools.

* This product must be used in accordance with all applicable laws and regulations.

4. Installation Instructions

Page 3