2 | Page
Congratulations on your purchase of the E-bot.
The E-bot, short for Education Robot, is a transportable video magnifier
designed to meet the needs of the low vision student in a variety of
situations. However, its flexibility and versatility make it an excellent
product for low vision users of all ages. The E-bot provides close-up and
distant magnification as well as connectivity to a variety of devices
including monitors, computers and iOS and Android tablets.
E-bot offers a variety of powerful features for low vision students and
users of all ages including the following:
1) View images on the included reading table or on a whiteboard or
presentation screen several feet away.
2) Adjust color, contrast and magnification levels for best viewing for
your visual condition
3) View images on a large monitor or TV, the screen of your Mac or
PC, or an iPad or Android tablet.
4) Manipulate image viewing in a variety of ways including using the
main controls on the unit, the keyboard and mouse of your
computer, or the touch screen of your iPad or Android tablet.
5) Easily transport from classroom to classroom, work to home, etc.
Safety Precautions
For your safety and protection of the E-bot, please read and abide by the
following important safety precautions.
1) Do not plug the AC adapter into a faulty electrical outlet. This is to
Page | 3
prevent electrical shock or fire.
2) Do not touch the AC adapter with wet hands.
3) Use only the AC adapter provided with the E-bot. Using another AC
adapter may damage the device. Be advised that damage caused
by misuse is not covered by the warranty.
4) Please do not remove the power cable when the E-bot is turned on
as this can damage the product.
5) Do not use the E-bot in a moisture-rich environment such as a
bathroom, shower or a wet kitchen counter as moisture may get
inside the unit and damage the components.
6) Do not use E-bot in extreme high or low temperatures. We
recommend that you do not use this device in environments below
0°C or above 40°C, as the image may display inaccurately.
7) Always turn off the power before moving the product to another
location.
8) When you press the release switch to fold the E-bot, please grip the
arm and manually fold the unit. Allowing the arm to simply drop may
cause impact damage to the unit.
9) Do not use the DC OUT at the back of the device as a power supply
for devices other than authorized visual displays for E-bot as this
can damage the product and/or the connected device.
.
4 | Page
Table of Contents
1. Package Contents ...................................................................................... 6
2. E-bot Orientation ........................................................................................ 7
2.1 Overview .............................................................................................. 7
2.2 Back Side of E-bot ............................................................................... 7
2.3 Side of E-bot ....................................................................................... 8
2.4 Front of E-bot ...................................................................................... 9
3. E-bot Setup .............................................................................................. 10
3.1 Unfolding the E-bot ............................................................................ 10
3.2 Folding the E-bot ............................................................................... 11
3.3 Inserting the Battery .......................................................................... 12
3.4 Removing the Battery ........................................................................ 13
3.5 Charging the E-bot ............................................................................ 13
4. How to Connect to Display Devices ......................................................... 16
4.1 Connecting a Monitor via HDMI ......................................................... 16
4.2 Connecting a Portable monitor .......................................................... 16
4.3 Connecting to a PC or a Mac ............................................................. 17
4.4 Connecting to an Apple iPad or Android Tablet via Wi-Fi .................. 25
5. Changing Camera Modes ......................................................................... 28
6. Using the Control Panel on the Main Body ............................................... 29
6.1 Power On/Off ..................................................................................... 29
6.2 Magnification ..................................................................................... 31
6.3 Changing the Color Mode .................................................................. 31
6.4 Contrast ............................................................................................. 32
6.5 Finding your current Reading Position ............................................... 32
6.6 Focus Lock ........................................................................................ 33
6.7 Light On/Off ....................................................................................... 34
6.8 Information ........................................................................................ 35
6.9 Main Body Channel Values ................................................................ 36
Page | 5
6.10 ............................................................................................ Volume Up/Down
36
6.11 ..................................................................................... Turning Wi-Fi On/Off
37
7. Advanced Features .................................................................................. 37
7.1 Color Mode Settings .......................................................................... 37
8. Preferences .............................................................................................. 39
9. Upgrade ................................................................................................... 43
10. Tablet Viewer Gestures ......................................................................... 45
11. Quick Guide to PC or Mac operations .................................................... 46
12. Troubleshooting ..................................................................................... 48
Warranty ........................................................................................................ 49
Customer Support .......................................................................................... 49
FCC warning .................................................................................................. 50
6 | Page
1. Package Contents
When you receive your E-bot, please make sure that the following items
are included with your package.
1) E-bot
2) E-bot Battery
3) AC Adapter
4) Cables (USB 3.0, HDMI)
5) HDMI to DVI Gender Adapter
6) Carrying Case
7) User Guide
8) PC and Mac Installation Program CD
Page | 7
2. E-bot Orientation
2.1 Overview
2.2 Back Side of E-bot
Camera
Close-up Lens
Camera Arm
Control Panel
Table
Arm Lock Button
8 | Page
2.3 Side of E-bot
USB 3.0 Port
HDMI Port
Battery Release Button
DC OUT Port
DC IN Port
Channel Switch
Page | 9
2.4 Front of E-bot
Power Button
Mode Button
Zoom Button
Contrast Button
Light Button
Power Indicator
Wi-Fi Indicator
10 | Page
3. E-bot Setup
3.1 Unfolding the E-bot
Follow the instructions below to unfold the E-bot.
① Press and hold the arm lock button on the left side of the E-
bot.
② While holding the arm lock button, unfold the longer camera
arm upward.
③ Then, grip the camera part and unfold it upward as well.
Page | 11
④ The E-bot is ready for use.
3.2 Folding the E-bot
① Grip the camera part and fold it downward.
12 | Page
② While holding the arm lock button, fold the longer camera arm
downward.
3.3 Inserting the Battery
① Grip the E-bot’s main body and insert the battery.
② When the battery is fully inserted, you will feel and hear it click
in to place.
Page | 13
3.4 Removing the Battery
① Lift the battery release button on the back side of the unit.
② While lifting the battery release button, pull the battery out of
the compartment.
3.5 Charging the E-bot
3.5.1 Charging via the AC Adapter
14 | Page
① The DC jack is located on the back side of the E-bot.
② When E-bot is connected to the AC adapter, the battery is
being charged.
※ Note: When you use the E-bot for the first time or after
a long period of disuse, please allow the unit to charge for
more than 5 hours.
3.5.2 Charging via USB
① Connect the flatter end of the USB 3.0 cable to the USB
port on your PC.
② Connect the smaller, larger end of the USB 3.0 cable to the
USB port on the back side of the unit.
※ Note: If you connect the E-bot to a computer via USB
while E-bot is powered off, the E-bot’s battery is charged.
However, USB charging is quite slow. We recommend a
minimum of 25 hours or more to charge.
3.5.3 The P ower Indicator
The Power Indicator is located on the top right of the control
panel of the main body. The Power Indicator indicates status as
follows:
When the battery is being charged while E-bot is turned on, the
Page | 15
Power Indicator appears red. When the battery is fully charged
while E-bot is turned on, the Power Indicator color is changed to
green. When the battery is being charged while E-bot is turned
off, the Power Indicator appears red. When the battery is fully
charged while E-bot is turned off, the Power Indicator is not lit.
16 | Page
4. How to Connect to Display Devices
E-bot is compatible with various types of display devices, such as
desktop video monitors, laptop computers, and Apple or Android
tablets.
4.1 Connecting a Monitor via HDMI
① Plug the monitor's power cord into a power outlet.
② Connect the HDMI cable to the HDMI port on the monitor.
③ Connect the opposite end of the HDMI cable to the HDMI port
on the rear of the E-bot.
※ Note: If the monitor has no HDMI port, but has a DVI port,
please use the included HDMI to DVI gender adapter.
※ Note: When connecting to an HDMI monitor, the resolution
of video output is 1280x720 regardless of the monitor’s
resolution.
4.2 Connecting a Portable monitor
The On-Lap Monitor is a portable, USB powered LCD, sold
separately.
① Connect the portable monitor's USB power cable (USB 2.0)
to the DC OUT port on the back of E-bot.
※ An example of potable monitor
Page | 17
② Connect the portable monitor's HDMI cable to E-bot’s
HDMI port to display E-bot’s output on the portable monitor.
※ Note: The DC OUT port is used only for connecting the
portable monitor. Please do not connect USB drives or other
USB devices to the DC out port.
4.3 Connecting to a PC or a Mac
Recommended PC specifications are as follows:
! USB 3.0 support
! CPU: i5
! RAM: 4GB
! Graphics: 1GB
※ Note: Tablets running full Windows are also supported.
However, you cannot use the E-bot Viewer on tablets running
Windows RT.
※ Note: PC’s using USB 2.0 can display E-bot’s output,
however, the display is a low-resolution image.
※ Note: Macs running USB 2.0 are not supported.
To display E-bot’s output on your PC, you first need to install the
PC viewer program.
4.3.1 Installing the PC Viewer Program
① Insert the installation CD into the PC.
② The Installation program should run automatically. If not, run
18 | Page
the “E-bot_Package.exe” file.
③ The following window appears.
④ When you press this “I Agree” button, will pop up following
window for selecting the installation path.
⑤ In the installation path window, select the path and click
Install button.
⑥ Disconnect the E-bot from the PC, and proceed with the
installation.
Page | 19
⑦ The installation is in progress.
⑧ Installation is successfully completed.
⑨ PC Viewer icon will be generated on the desktop of your
PC.
4.3.2 Installing the Mac V iewer Program
① Insert the installation CD into the Mac.
② The Installation program should run automatically. If not,
20 | Page
please open the CD-ROM drive in “Finder”.
③ The CD contains two files. “E-BOT Driver Software v1.5.0
for MAC OS X(reboot).zip” and “EBotViewerForOSXv1.0.1.zip”.
④ First, extract “E-BOT Driver Software v1.5.0 for MAC OS
X(reboot).zip to the desktop.
⑤ Run “E-BOT Driver Software v1.5.0 for MAC OS
X(reboot).pkg”.
⑥ Check the below window and click the continue button.
⑦ Select “Install for all users of this computer” and click the
continue button.
Page | 21
⑧ Check the required space on the Mac and click the Install
button. It needs 258KB to install.
⑨ Rebooting is required to finish the installation. Please click
the Continue Installation button.
22 | Page
⑩ Installation begins. It requires around 1 minute.
⑪ After finishing Installation, please click the Restart button to
reboot your Mac.
Page | 23
⑫ After rebooting, please extract files from
“EBotViewerForOSX-v1.0.1.zip” to the desktop.
⑬ Installation is complete. Please connect E-bot PRO to Mac
and run file “EbotViewerForOSX” of folder “v1.0.1”.
4.3.3 Connecting to the PC V iewer Program and Mac
Viewer Program with E-bot
1) Connecting to a PC via USB
① Connect the E-bot’s USB 3.0 port to the USB port of
your PC using the included USB 3.0 cable.
② And run the E-bot viewer program on your PC. Select
USB as the connection method.
24 | Page
※ Note: When connected to USB 2.0, USB 2.0 will be
displayed.
※ Note: for Mac, only USB 3.0 connectivity is supported.
※ Note: If you connect E-bot to a PC which does not
support USB 3.0, the enlarged image resolution is
automatically adjusted to accommodate the difference in
connection speed.
※ Note: For instructions on controlling E-bot using a
keyboard and mouse, please refer to section 11 of this
manual.
2) Connecting to a PC via Wi-Fi
E-bot can output magnified images via Wi-Fi connection to
Windows PC’s, Android tablets and Apple iPads.
① To output to your PC via Wi-Fi, turn on the E-bot.
② Set the E-bot Wi-Fi switch to ON. The Wi-Fi indicator is
changed to blue to indicate Wi-Fi is on.
Page | 25
③ Enter the PC's wireless network connection area and
connect to the E-bot network.
④ When you are asked for the network key, please enter
the E-bot’s Wi-Fi password. The default password is
“00000000”.
⑤ Once your PC is connected to the E-bot network, run the
E-bot viewer program on your PC, and select Wi-Fi as
the connection method.
※ Note: In the E-bot's options menu, you can change the
Wi-Fi password.
※ Note: You cannot use the Internet via Wi-Fi when you
connect to E-bot with PC via Wi-Fi.
4.4 Connecting to an Apple iPad or Android Tablet
via Wi-Fi
Tablets running iOS 7 and higher and Android 4.3 and higher
are supported.
26 | Page
① To view and operate E-bot via your tablet, please connect
to the Apple App Store or Google Play Store, and
download and install the free E-bot Viewer application.
② When the installation is complete, turn on the E-bot. Then
turn on the Wi-Fi switch on the right side. Once Wi-Fi is
turned on, the Wi-Fi indicator light on the main body
appears blue.
③ Be sure Wi-Fi is ON on your tablet, then select and
connect to “E-bot” from the Wi-Fi networks list. (For
example : Ebot_03XX).
Page | 27
④ Connecting to E-bot requires a network key. By default, it is
“00000000”. Enter the network key and connect as you
would normally connect to a Wi-Fi network on your tablet.
⑤ Run the E-bot Viewer app on your tablet, and make sure
that the image is displaying correctly.
※ Note: In the E-bot's options menu, you can change the
Wi-Fi password.
※ Note: For instructions on controlling E-bot using an
iPad or Android tablet, please refer to section 10 of this
manual.
28 | Page
5. Changing Camera Modes
E-bot has two camera modes; near view mode and distance view
mode. Flipping down the close-up lens switches to distance
viewing mode. Flip the close-up lens closed to switch back to near
viewing mode.
※ Note: Magnification, color mode, and function settings for
each mode are saved separately. So when switching the camera
mode, the settings are automatically changed to the settings you
last used for that mode.
Distance Viewing Mode
Near Viewing Mode
Page | 29
6. Using the Control Panel on the Main Body
6.1 Power On/Off
① Press and release the power button on the E-bot's main body
to power the unit on or off.
② The HIMS logo appears, and loading time takes 30 to 40
seconds.
③ When the power is turned on, the boot-up sound is heard and
the Power Indicator changes to green. When the battery is
being charged, the Power Indicator is colored red.
④ Press the power button briefly again to place the E-bot into
sleep mode.
⑤ If you fold the E-bot while in sleep mode, the unit does not
power off, but rather, remains in Sleep Mode. Thus, pressing
the Power button quickly wakes up the unit from sleep mode
as it normally would.
⑥ When the unit is awaken from sleep mode, all option settings
return to the status they were in before sleep mode was
activated.
⑦ When the power is turned on, press and hold the power button
for more than 2 seconds to power the unit completely off.
※ Note: The advantage of Sleep mode is that loading time is
shortened.
※ Note: If the E-bot is in the folded position, it cannot be
powered on. If the E-bot is folded when it is turned on, the
power shuts completely off, except in the case of Sleep Mode
as described above.
30 | Page
Page | 31
6.2 Magnification
You can change the magnification level to suit your visual needs
and the size of the print you’re currently reading.
Press the Zoom In button (+) to increase the magnification level.
Press the Zoom Out button (-) to decrease the magnification level.
As you press and hold either of these buttons, the magnification
level is adjusted continuously.
The magnification level ranges from 1 to 62. Levels 1 to 40 are
optical magnification and levels 41 to 62 are digital magnification.
6.3 Changing the Color Mode
You can change the color of the text and/or background on the
screen to accommodate your visual needs in regards to text type
and your visual condition.
Press the Previous mode button to change to the previous color
mode. To change to the next color mode, press the next mode
button.
32 | Page
6.4 Contrast
Due to variations in paper type, text type and color and the
background color of documents or books that you are reading, you
may need to adjust the contrast to read the documents or books
clearly.
You can adjust contrast by using the Contrast Increase/Decrease
buttons on the control panel on the main body. The Contrast level
can be adjusted from 1 to 40. The default level is 20.
6.5 Finding your current Reading Position
Use the Find location function, to find the position of the magnified
text you are currently reading in relation to the document placed
on the reading plate or the presentation screen or whiteboard you
are viewing from a distance.
Page | 33
Press and hold the Zoom in button and Zoom out together, the
magnification level is reduced back to normal and a red cross
appears in the center of the display to assist your orientation so
that you can locate the placement of the text in relation to the
whole document.
Release both the Zoom in and Zoom out buttons, and the
magnification level returns to the rate you were using before
pressing the Zoom buttons.
6.6 Focus L ock
By default, E-bot uses automatic focus. However, if you’re writing
under the camera or doing something else on which you don’t
want the camera to focus, you can use the Focus lock to lock the
focus on the text rather than allowing the auto focus to follow your
hand or pen.
34 | Page
Press both the Contrast Increase button and Contrast Decrease
button on the top of the main body.
When focus lock is activated, the Focus Lock icon is displayed on
the top right of the screen.
※ Note: Focus is unlocked automatically when the camera is
switched from Distance view mode to Near view mode or when
powering off when focus is locked.
6.7 Light On/Off
In the near view mode, the built-in light is automatically turned on
to ensure a clear image. E-bot contains a sensor to detect the
amount of illumination in your current surroundings, and contrast is
automatically adjusted according to the ambient brightness.
Page | 35
Press the Light button to turn the lights on or off. When viewing
glossy objects, please turn off the light to avoid glaring.
※ Note: When using distance view mode, the light is not turned
on.
6.8 Information
You can check general information about the E-bot.
Press the Next Mode button and Contrast Decrease button
36 | Page
together. You can check the following information about E-bot:.
! Software version
! Products serial number
! Battery status
! Wi-Fi AP
6.9 Main Body C hannel Values
You can check the channel values on the rear of the main body.
An arrow is pointing to the currently set value.
※ Note: You can upgrade your E-bot to E-bot ADV by matching
channel values between main body and the wireless controller.
For information on upgrading E-bot, please refer to section 9 of
this manual.
6.10 Volume Up/Down
① E-bot’s volume dial is located on the right side of the body.
② Turn the dial away from you, and the volume is increased, turn
the dial toward you, and the volume is decreased.
※ Note: Voice feedback is available only if the E-bot is
Page | 37
upgraded to E-bot ADV. For information on upgrading E-bot,
please refer to section 9 of this manual.
6.11 Turning Wi-Fi On/Off
To connect to a computer or Tablet via Wi-Fi, set the E-bot Wi-Fi
switch on the right side of the unit to ON.
7. Advanced Features
7.1 Color Mode Settings
You can set the color mode to best accommodate your visual
condition or the material you are reading. You can also disable
color modes that are not useful to you.
7.1.1 Setting the color mode
You can modify color modes to set them as color combinations
you frequently use. You can modify all color modes except for
Natural color mode.
① Bring up the option by pressing both the Previous color
button and Next color button on the top of the main body
for more than 2 seconds while using the view in which you
want to change.
38 | Page
② You can modify 6 color modes. Select the mode you want
to set.
※ Note: In the Natural color mode, you cannot change
the color.
③ The text color is displayed on the screen. Select the color
of the text using the Previous color button and Next color
button. You can save the wanted color by pressing both
the Previous color button and Next color button.
④ Select the Background color when you have finished
selecting the text color. Use the same method as when
setting the text color.
If Grayscale is chosen when selecting the text color, the
Color setting mode is exited without selecting a
Background color.
⑤ After you have selected the background color by pressing
both the Previous color button and Next color button, you
are returned to the view mode.
Page | 39
8. Preferences
8.1 Using headphones
You can hear the voice in a public place or classroom by using the
headphones.
※ Note: Use only standard headphones. Headsets with built-in
microphones, such as Apple earbuds, will not work with E-bot.
8.2 Initialization
① Set the settings back to the factory defaults.
② When you turn on the device, press the Light button until
you see the HIMS logo.
8.3 Wi-Fi password change
An eight -digit number is needed to connect E-bot to Wi-Fi using
an iPad, Android tablet or PC. The default password is “00000000”.
To change the password, follow the instructions below:
① Bring up the Wi-Fi Password Dialog by pressing the
Previous color, Next color, Contrast Decrease and
Contrast Increase buttons on the top of the main body all
together for more than 5 seconds.
40 | Page
② A window asking for the current password appears. Input
the password using the virtual keyboard on the screen.
③ Use the Next color, Zoom in, Zoom out and Contrast
Decrease buttons to navigate to the character you want to
type, and press the Contrast Increase button to input the
character. Input the current password and press the
Contrast Increase button on the Enter key of the virtual
keyboard.
※ Note: If you want to exit the Wi-Fi Password Dialog,
please press the Previous color button.
Page | 41
④ A window asking for the new password appears. Input the
8-digit password in the manner described above.
⑤ A window asking you to reconfirm the password to change
appears. Input the new password again.
⑥ When you have finished the above steps, the new
password is set.
⑦ You are returned to the view mode.
8.4 Information
Use this option to check general information about the E-bot.
① Bring up the Information window by pressing both the Next
color and Contrast Decrease buttons on the top of the main
body.
② Here, you can check the following information about E-bot:.
! Software version
! Products serial number
! Remaining battery, Battery charge status and whether
Battery is inserted
- If battery is not inserted, it displays “No battery”
Lef
Up
Down
Right
42 | Page
- If battery is inserted and power is supplied, it
displays “Charging xx%”
- If battery is inserted and power is not supplied, it
displays “Charged xx%”
! Wi-Fi AP
- It is displayed as E-bot_xxxx. “xxxx” is serial number
of E-bot.
③ To close the menu, press any button on the top of the main
body.
Page | 43
9. Upgrade
9.1 Upgrading from E-bot to E- bot ADV
: To upgrade to E-bot ADV from E-bot, you must purchase the
upgrade and obtain a certification number in order to authenticate
the upgrade.
9.2 Authenticating the Upgrade
① Make sure the main body and the purchased Wireless
controller’s channel setting values are the same.
② Press any button on the wireless controller, and the
certification number input window appears.
③ Input the certification number using the virtual keyboard on the
screen. Use the arrow keys to navigate to the character you
want to type, and the Enter button to input the character.
④ If the certification number matches, the upgrade to E-bot ADV
is complete.
! Checking the Main Body C hannel Values
① Please check the channel values on the rear of the main
body. An arrow points to the currently set value.
! Checking the Wireless C ontroller Channel V alue
① Remove the battery cover from the back of the wireless
controller.
44 | Page
② Check the channel setting switch. It can set the channel
values as shown in the below picture. Make sure it is set to
the same channel value as the one shown on the main
body of your E-bot. If the channel value is different, please
use (-) a screw driver or your fingernail to change the
setting.
※ Note: If the wireless controller does not operate even
though the channel value is the same, please change the
battery in the wireless controller.
Page | 45
10. Tablet Viewer Gestures
Functions
Tablet
Gesture
Zoom In
Move fingers away from each other
Zoom Out
Pinch fingers towards each other
Control
Menu
Control
Menu
Open
One finger Tap on the right end of the screen and flick to left
Previous/Ne
xt color
46 | Page
mode
One finger Tap on
the icon
Focus Lock
On
Focus Lock
Off
Contrast
One finger flick to left or to right
Set Color
Mode
Open
One finger Tap on the left end of the screen and flick to right
Cancel /
Exit
One finger Tap on the cancel icon
11. Quick Guide to PC or Mac operations
Function
PC
Keyboard
Mouse
Zoom-in
Wheel Upwards
Zoom-out
Page | 47
Wheel Downwards
Find position
+
-
Next Color
Left-Click
Previous Color
+
-
Quick color change
-
Increase Contrast
-
Decrease Contrast
+
-
Focus Lock
+
-
Set Color
Mode
Open
+
Right-Click
Close
Exit program
+
48 | Page
12. Troubleshooting
12.1 The E-bot does not turn on when you press
the power button
a. E-bot's battery may be discharged. Please connect the power
cable.
b. Please be sure the monitor is powered on.
c. Make sure the E-bot is unfolded. The E-bot cannot be powered
on in the folded position.
12.2 You cannot see the texts clearly
a. Make sure the focus is not locked. In Focus Lock mode, E-bot
doesn’t focus automatically. Switch to Auto Focus by pressing
both the Contrast Increase button and Contrast Decrease
button on the top of the main body.
b. Adjust the contrast by using the Contrast button.
c. If viewing glossy pages, please turn off the light to avoid
glaring.
d. Be sure the camera lens is clean. If there is dust on the
camera, the image will not look like it’s in focus and the auto
focus will not work properly. Clean the camera with the
cleaning cloth.
12.3 You cannot execute the color mode
settings
a. Check the current color mode. Be sure you are not using
Natural Color Mode. You must be using color modes 1-6 to
adjust the color mode settings.
12.4 If the Wi-Fi password is incorrect or you
have forgotten the Wi-Fi password
a. Please initialize the option settings, and it will be returned to
“00000000”.
Page | 49
Warranty
1) The Warranty term is 2 years from the date of purchase.
2) Warranty does not cover problems arising from damage caused
by the user, including, but not limited to; damaged caused by
external force or damage caused by introducing liquid in to the
unit.
3) Disassembling of the unit by anyone other than an authorized
repair technician will void the warranty.
Customer Support
Manufacturer: HIMS International
Manufacturer Address: 174 Gajeong-ro, Yuseong-gu,
Daejeon, Korea 305-350
E-mail: sale@himsintl.com
Phone Number: 042-864-4601
FAX: 042-864-0133
50 | Page
FCC warning
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by
the manufacturer responsible for compliance could void the user’s
authority to operate the equipment.
Loading...