Hilti SD2500, ST2500 User Manual

ST2500 / SD2500

*378505*

378505

Bedienungsanleitung de
Operating instructions en
Mode d’emploi fr

Hilti Corporation

FL-9494 Schaan
Tel.: [phone]
Fax: [phone]
www.hilti.com

Hilti = registered trademark of Hilti Corp., Schaan W 2823 0803 25-Pos. 1 1 Printed in Liechtenstein © 2003
Right of technical and programme changes reserved S. E. & O.

378505/A

4

5

6

7

1

1 2

4

5

6

7

1

4

8

9

8

2

3

4

5

7

I. II. III.

46810

5

7

911

6

Click

9

en

It is essential that the operating instructions
are read before the tool is operated for the
first time.

Always keep these operating instructions
together with the tool.

Ensure that the operating instructions
are with the tool when it is given to other
persons.

ST2500 / SD 2500 electric screwdriver

1. General information

1.1 Signal words and their meaning

-CAUTION-

Used to draw attention to a potentially dangerous situa­tion which could lead to minor personal injury or damage
to the equipment or other property.

-NOTE-

Used to draw attention to an instruction or other useful
information.

1.2 Pictograms

Contents Page

1. General information 9

2. Description 10

3. Tools and accessories 11

4. Technical data 11

5. Safety precautions 12

6. Before use 13

7. Operation 14

8. Care and maintenance 15

9. Disposal 15

10. Warranty 16

11. EC declaration of conformity 16

Operating controls and parts 

 Chuck
 Protective sleeve (ST2500 only)
 Push-fit connection between depth gauge and

electric screwdriver

 Control switch lockbutton
 Supply cord
 Control switch
 Forward/reverse pushbutton
 Depth gauge adjusting ring
 Belt hook (SD2500 only)

 These numbers refer to the corresponding illustra­tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the operating
instructions.
In these operating instructions, the ST 2500 or SD 2500
electric screwdriver is referred to as "the tool".

Location of identification data on the tool

The type designation can be found on the rating plate
and the serial number on the side of the motor housing.
Make a note of this data in your operating instructions
and always refer to it when making an enquiry to your
Hilti representative or service department.

Type:

Serial no.:

Warning signs

General
warning

Warning:
electricity

Obligation signs

Wear

ear

protection

Wear

eye

protection

Symbols

Read the

operating

instructions

before use.