Hilti SL 2-A12, SL 2-A22 User Manual
SL 2-A12
SL 2-A22
Printed: 11.04.2019 | Doc-Nr: PUB / 5346556 / 000 / 02
English
Printed: 11.04.2019 | Doc-Nr: PUB / 5346556 / 000 / 02
SL 2-A12
SL 2-A22
Original operating instructions
Printed: 11.04.2019 | Doc-Nr: PUB / 5346556 / 000 / 02
Printed: 11.04.2019 | Doc-Nr: PUB / 5346556 / 000 / 02
1 Information about the documentation
1.1 About this documentation
• Read this documentation before initial operation or use. This is a
prerequisite for safe, trouble-free handling and use of the product.
• Observe the safety instructions and warnings in this documentation and
on the product.
• Always keep the operating instructions with the product and make sure
that the operating instructions are with the product when it is given to
other persons.
1.2 Explanation of symbols used
1.2.1 Warnings
Warnings alert persons to hazards that occur when handling or using the
product. The following signal words are used:
DANGER
DANGER !
▶ Draws attention to imminent danger that will lead to serious personal
injury or fatality.
WARNING
WARNING !
▶ Draws attention to a potential threat of danger that can lead to serious
injury or fatality.
CAUTION
CAUTION !
▶ Draws attention to a potentially dangerous situation that could lead to
slight personal injury or damage to the equipment or other property.
1.2.2 Symbols in the documentation
The following symbols are used in this document:
Read the operating instructions before use.
Instructions for use and other useful information
Dealing with recyclable materials
Do not dispose of electric equipment and batteries as household
waste
1.2.3 Symbols in the illustrations
The following symbols are used in illustrations:
Printed: 11.04.2019 | Doc-Nr: PUB / 5346556 / 000 / 02
English 1
These numbers refer to the corresponding illustrations found at the
beginning of these operating instructions
The numbering reflects the sequence of operations shown in the
illustrations and may deviate from the steps described in the text
Item reference numbers are used in the overview illustrations and
refer to the numbers used in the product overview section
This symbol is intended to draw special attention to certain points
when handling the product.
1.3 Product information
products are designed for professional users and only trained,
authorized personnel are permitted to operate, service and maintain the
products. This personnel must be specifically informed about the possible
hazards. The product and its ancillary equipment can present hazards if
used incorrectly by untrained personnel or if used not in accordance with
the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to
state the product details when contacting Hilti Service or your local Hilti
organization to inquire about the product.
Product information
Cordless lamp SL2-A12 | SL2-A22
Generation 01
Serial no.
1.4 Declaration of conformity
We declare, on our sole responsibility, that the product described here
complies with the applicable directives and standards. A copy of the
declaration of conformity can be found at the end of this documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916
Kaufering, Germany
2 Safety
2.1 Important safety instructions
WARNING! READ ALL INSTRUCTIONS. Failure to follow all instructions
listed below can result in electric shock, fire and/or serious injury. KEEP
THESE INSTRUCTIONS IN A HANDY YET SECURE PLACE.
2.2 Careful handling and use
▶ Use the product only when it is in perfect working order.
2 English
Printed: 11.04.2019 | Doc-Nr: PUB / 5346556 / 000 / 02
Loading...