Hilti CA3400 INSTALLATION

Basic Use

CA3400 provides outstanding adhesive capabilities bonding
securely to wood, plywood, hardboard, fiberboard, concrete,
masonry, stone , tile marble, acoustical material, polyurethane
foam and most other common building materials.

Shelf Life

CA3400 has a shelf life of 2 years from the date of manufacture
when stored at temperatures from 40°F to 90°F. Expiration date
is stamped into each tube.

Limitations

Hilti CA3400 is not recommended for use in bonding polystyrene foam.

7.2.4.3 INSTALLA TION DATA

7.2.4.4 INSTALLATION INSTR UCTIONS

7.2.4.5 ORDERING INFORMATION

Surface Preparation

All surfaces should be clean and free from all contaminants such as
oil and grease.Joist covered with ice , water , sa w dust, snow, mud or
other foreign materials should be cleaned prior to application.

Installation

Place adhesive cartridge into standard one quart dispenser, then cut
the tip of cartridge nozzle at a slant to desired bead diameter.
Puncture inner seal with nail or wire and apply adhesive in a contin­uous bead.Press surfaces firmly together.

Apply only as much CA3400 Subfloor Adhesive as can be covered
within 20 minutes, and use a 1/4" zig zag bead when laminating
underlayment to joists.For best results , adhesive should be k ept at
room temperature for 24 hours prior to use when temperatures are
below 40°F, for easier extrusion from the tube.

When installing CA3400 for glued APA floor systems, apply per the
American Plywood Association specifications.

Cleaning

Tools and excess adhesive should be cleaned with mineral spirits.

Description Item No.

Tube (29 fl oz) 00024806
Case of 12 tubes 00024807
Pallet of 240 tubes 00024932