Hillsdale Furniture 4975PTBBRN Assembly Guide

(8) Large Spring Washers
(8)
(8)

E (4) Small Spring Washers

Date: 12-06-07

DYNAMIC DESIGN PUB HEIGHT TABLE

Model #4975-840 Pub Height Table

(2)
(1)

E

E

E

Attach each Leg Support (K) together by
sliding each into place. During assembly,
secure the Leg Support (K) to the bottom
Table Base (J) using 1 Hex Nut (D), 1 Large
Spring Washers (B) & 1 Flat Washers (C) per
each holes. Tighten all nuts using Hex

Attach Top Support (L) to the Table Base (J)
secure in place using 1 Hex Nut (D), 1 Large
Spring Washer (B) & 1 Flat Washer (C) per
each holes. Tighten all nuts using Hex

Attach the Table Top (H) to the top of Table
Support (J) Using 1 Allen Bolt (A), 1 Small
Spring Washer (E) per each support. Tighten
all bolts using Allen Wrench (G) that has
been provided. Assembly complete.