Hillsdale Furniture 4442806 Assembly Guide
HILL
SD
ALE
POMPEI DINING CHAIRS
FURNITURE, LLC.
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure
that all components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult
assembly is required. Online Parts Request: parts.request@hillsdalefurniture.com - Customer Service Phone Number: 502-562-0000
HARDWARE LIST
(4) Wood Screws
A
(4) Long Allen Bolts
B
(2) Short Allen Bolts
C
(2) Long Counter Sunk Bolts
D
(2) Short Counter Sunk Bolts
E
(4) Spring Washers
F
(4) Metal Washers
G
(1) Allen Wrench
H
(1) Open Wrench
R
J
Model #4442-806 Dining Chairs W/ Casters
PARTS LIST
(1) Chair Back
J
(2) Arms
K
(1) Seat Base
L
(1) Metal Plate
M
(1) Chair Base
N
(4) Casters
P
(1) Cushion
Q
K
ABCD
EFG H
J
Date: 07-28-06
R
Q
K
C
STEP 1
Attach both Arms (K) to Chair Back (J), by inserting each arm
into tab, and use 1 Short Allen Bolt (C) per each arm to hold
in place. Next, attach each Arm to Seat Base (L), using 1 Long
Counter Sunk Bolt (D) & 1 Short COunter Sunk Bolt (E) per
each arm. Tighten all bolts only using Allen Wrench (H) provided.
STEP 2
Please keep the Same Direction of teh Swivel Plate and the
Cradle. Next, attach Metal Plate (M) to bottom of Seat Base
(L), using 4 Long Allen Bolts (B), 4 SPring Washers (F) & 4
Metal Washer (G) to hold in place. Tighten all botls only using
Allen Wrench (H) provided.
STEP 3
Attach Seat Cushion (Q) to Seat Base (L), using 4 Wood Screws
(A) to hold tight in place. Only tighten using a phillips head
screwdriver (not included) as power tools may result in damage
to the parts and/or hardware.
STEP 4
Finally, attach each Caster (P) into bottom of each leg on Chair
Base by aligning holes and firmly screwing each in place using
the Open Wrench (R) that is provided. Also, attach Chair Base
(N) to Metal Plate (M) by inserting into place. The assembly is
now complete.
C
L
E
D
L
M
A
G
F
G
F
B
B
N
P
P
P
P
CARE & MAINTENANCE: The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for
polishing, as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
Loading...