Hillsdale Furniture 4442802 Assembly Guide
Customer Service
POMPEI DINING CHAIR
FURNITURE, LLC.
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended
to insure that all components are in proper position, tight and free from damage. Keep this assembly instruction for future
reference. Adult assembly required. Online Parts Request Form: www.hillsdalehouse.com/parts_request.html
Model #4442-802 2 Pk. Chairs
Phone Number:
502 562-0000
10-25-04
HARDWARE LIST
(4) Wood Screws
A
(3) Large Allen Bolts
B
(2) Counter Sunk Bolts
C
(12) Small Allen Bolts
D
(3) Spring Washers
E
(3) Metal Washers
F
(1) Allen Wrench
G
PARTS LIST
(1) Chair Back
H
(2) Metal Scrolls
J
(1) Seat Base
K
(2) Front Legs
L
(1) Cross Brace
M
(1) Seat Cushion
N
STEP 1
Begin assembly by attaching each Metal
Scroll (J) to Chair Back (H), using 1
Counter Sunk Bolt (C) per each side.
Only hand tighten bolts for this step.
STEP 2
Next, attach Both Front Legs (L) to Seat
Base (K), using 3 Small Allen Bolts (D)
per each leg. Only tighten bolts by hand
for this step.
STEP 3
Attach Seat Base (K) to Chair Back (H)
using 3 Large Allen Bolts (B), 3 Spring
Washers (E) & 3 Metal Washers (F) to
hold in place. Also, attach to each Metal
Scroll (J), using 1 Small Allen Bolt (D)
per each side. Only tighten bolts by hand
for this step.
STEP 4
Attach Cross Brace (M) to both legs on
Chair Back (H) & to both Front Legs (L)
using 1 Small Allen Bolt (D) per each
leg. (If Cross Brace is not properly
attached, the holes will not line up & you
will be unable to assemble. If you find
this a problem, turn it around). Tighten
all bolts from Steps 1 through 4.
STEP 5
Finally, attach Seat Cushion (N) to Seat
Base (K), using 4 Wood Screws (A) to
hold in place. Tighten all screws using
only a phillips head screwdriver (not
included) as power tools may cause
damage to parts and/or hardware. The
assembly is now complete.
AB CD
EF G
H
N
B
E
F
D
J
D
B
E
F
C
D
B
E
F
K
J
A
M
D
D
L
L
CARE & MAINTENANCE
:
The touch of a soft cloth is all the maintenance the finish will ever need.
Please do not use harsh or abrasive cleaners for polishing, as they may cause damage to the finish. Periodic
checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
Loading...