Hillsdale Furniture 1178-310, 1178-311 Assembly Instructions Manual
To help prevent serious or fatal injuries from entrapment or falls:
Follow the information on the warnings appearing on the upper bunk end structure and on the carton. Do not remove
warning label from bed.
Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment
or falls.
Use only mattress which is 74-75 inches long and 37-1/2 - 38-1/2 inches wide on upper and lower bunk. Ensure thickness
of mattress and foundation combined does not exceed 8 inches and that mattress surface is at least 5 inches (127 mm)
below the upper edge of guardrails.
Do not allow children under 6 years of age to use the upper bunk.
Prohibit more than one person on the upper bunk at all times.
Periodically check and ensure that the guardrail, ladder, and other components are in their proper position, free from
damage, and that all connectors are tight.
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
Always use the ladder for entering and leaving the upper bunk.
Do not use substitute parts.
Contact the manufacturer or dealer for replacement parts.
Use of a night light may provide added safety precaution for a child using the upper bunk.
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to the wall, the guardrail
that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and wall.
The use of water or sleep flotation mattresses is prohibited.
STRANGULATON HAZARD - Never attach or hang items to any part of the bunk bed that are not designed for use with the bed;
for example: but not limited to - hooks, belts, and jump ropes.
! IMPORTANT !
Keep these instructions for future reference.
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all components are in proper
position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required. Customer Service Phone Number: 502-562-0000
05/05/10
Page 1 of 5
FURNITURE, LLC.
HILLSDALE
A
HARDWARE LIST
(12) Allen Bolts 1/4
x 2
3/4
(4) Allen Bolts
M8 x 95mm
(8) Allen Bolts 1/4
x 1
1/2
(8) Allen Bolts 1/4
x
5
/8
(4) Square Lock Nuts
(16) Metal Screws
M4 x 12
(1) Allen Wrench
4mm
(1) Allen Wrench
5mm
A
B
C
D
E
F
G
H
PARTS LIST
(1) Open End Panel
(1) Full End Panel
(1) Top Deck
(2) Side Rails
(1) Full Mesh Panel
(1) Half Mesh Panel
(4) Long Support Bars
(4) Short Support Bars
(2) Left Side Shelves
(2) Right Side Shelves
(1) Curtain
J
K
L
M
N
P
R
S
T
V
X
UNIVERSAL JUNIOR BUNK BED
1178-310 Junior Bunk Bed - Side Panels
1178-311 Junior Bunk Bed - Deck / Rails
B
C
GH
DE
F
B
B
STEP 1
Begin assembly by attaching the Top Deck (L) to the inside of each Open End
Panel (J) and Full End Panel (K) by resting each hook in place, inserting each
Square Lock Nut (E) into the sides of the Top Deck (L) and securing from the
outside of both panels (J & K) with 2 Allen Bolts (B) to hold in place. Do not
fully tighten bolts.
See next page for more assembly.
05/05/10
Page 2 of 5
J
K
L
E
E
B
B
Loading...