Hills WK-1-O Quick Start Manual
QUICK START GUIDE
WK-1-O Access Point
802.11ac dual band
Version 1.0
2 3
Package Contents 3
WK-1-O Mounting Options 4
Powering Up the Access Point 6
Conguring the Access Point 8
Step 1: Login 8
Step 2: Radio 14
Step 3: Security Proles 18
Step 4: Conguration 20
Contents
Please refer to the installation manual of your product.
WK-1-O
• 802.11ac Dual Band Access Point
• 2x2 external outdoor antennas
• Powered by PoE+
System Requirements
Windows or Mac PC with an Ethernet interface.
WK-1-O Default Settings
Operation Mode: Access Point
IP Address: 192.168.1.250
Username/Password: pakedge/pakedgea
SSID: Pakedge2.4-1 and Pakedge5-1
Power Output: High
Security: Disabled
Package Contents
4 5
WK-1-O Mounting Options
Pipe Mounting Figure
Wall Mounting Figure
NOTE: Please refer to the user manual for more detailed information regarding the installation and
conguration of the access point.
6 7
The access point can be powered via PoE. Please see below for examples:
Power Using a PoE Injector
Powering Up the Access Point
WK-1-O
Smartphone
Panel
Laptop
Laptop
Tablet
Switch
PoE
Injector
Ethernet Cable
Ethernet Cable
WK-1-O
Smartphone
Panel
Laptop
Laptop
Tablet
Switch
Ethernet Cable
Power using a PoE Switch
The Wireless Access Point should now be up and running under its default settings. It does not
need to be congured to be functional. To make changes to the SSID and security settings, you
need to access the WK-1-O using a web browser.
Loading...