Hilka 82952000, 82951000 User Manual

82951000
82952000

1 TONNE / 2 TONNE CAPACITY

FOLDING HYDRAULIC

SHOP CRANES

ASSEMBLY AND OPERATION

PLEASE RETAIN THIS LEAFLET

FOR FUTURE REFERENCE

Safety Advice

Read instructions carefully before use. Failure to comply with any
of these cautions may cause serious injury

Check for damaged welds and be sure all fasteners are secure.

Always work on a solid level surface.

Never roll loaded engine hoist across a surface with cracks, holes
or other obstacles which mightimfede movement of wheels.

Never work under an engine mounted on this hoist

Never exceed the engine hoist rated capacity.

When not using hoist always leave ram in down lowest
position

Do not exceed rated load capacity.

Technical Data

82951000 - 1 Tonne Crane

Stage 1 Stage 2 Stage 3 Stage 4

Lifting Capacity (kg) 1000 750 500 250

82952000 - 2 Tonne Crane

Stage 1 Stage 2 Stage 3 Stage 4

Lifting Capacity (kg) 2000 1500 1000 500

Maintenance

Check ram and plunger every 3 months for any signs of rust or
corrosion

Clean as needed and wipe with a clean cloth

When adding or replacing oil. Always use a good grade of hydraulic
jack oil, avoid mixing types of oil.

Don’t use brake uid, alcohol or motor oil, when adding oil you must

be very careful not to permit dirt or any other foreign matter to get
into the system.