HIKVISION MV-VB2100-032G, MV-VB2100-120G User Manual

Vision Box

User Manual

UD04763B

Vision Box User Manual

1

TABLE OF CONTENTS

Chapter 1 Overview ............................................................................................... 6

1.1 Introduction .................................................................................................. 6

1.2 Features ........................................................................................................ 6

1.3 Specifications ............................................................................................... 6

Chapter 2 Panels and Connections ....................................................................... 8

2.1 Dimensions................................................................................................... 8

2.2 Installation .................................................................................................... 8

2.3 Panels ........................................................................................................... 9

2.4 GPIO Connections ..................................................................................... 11

2.4.1 Pin Definitions .................................................................................. 11

2.4.2 OutputConnections............................................................................ 11

Chapter 3 Operation of I/O and Demo .............................................................. 13

3.1 Input/Output Pattern ................................................................................... 13

3.2 Operation of Demo..................................................................................... 13

3.2.1 Selecting Pattern ............................................................................... 14

3.2.2 Triggering by I/O .............................................................................. 14

3.2.3 Triggering by Serial Port ................................................................... 15

3.2.4 Configuring Serial Port Property ...................................................... 16

Chapter 4 Video Output Configuration ............................................................. 19

4.1 HDMI Video Output .................................................................................. 19

4.2 Remote Access ........................................................................................... 19

Chapter 5 System and Driver Installation ......................................................... 20

5.1 Installing Operating System ....................................................................... 20

5.2 Installing the Driver ................................................................................... 20

Vision Box User Manual

2

Quick Start Guide

COPYRIGHT © 2017 Hangzhou Hikvision Digital Technology Co., Ltd.

ALL RIGHTS RESERVED.

Any and all information, including, among others, wordings, pictures, graphs are the properties of
Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be

“Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced,

changed, translated, or distributed, partially or wholly, by any means, without the prior written
permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties,
guarantees or representations, express or implied, regarding to the Manual.

About this Manual

This Manual is applicable to Vision Box.
The Manual includes instructions for using and managing the product. Pictures, charts, images and
all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version in the company website
(http://www.hikrobotics.com/en/index.aspx).
Please use this user manual under the guidance of professionals.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are the properties of Hikvision in various
jurisdictions. Other trademarks and logos mentioned below are the properties of their respective
owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS
HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,
AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS,
EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE
USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY
AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER
ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS
USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.

Vision Box User Manual

3

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct the interference at

his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE" and

comply therefore with the applicable harmonized European standards listed under the

EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of

as unsorted municipal waste in the European Union. For proper recycling, return this

product to your local supplier upon the purchase of equivalent new equipment, or

dispose of it at designated collection points. For more information see: www.recyclethis.info

2006/66/EC (battery directive): This product contains a battery that cannot be disposed

of as unsorted municipal waste in the European Union. See the product documentation

for specific battery information. The battery is marked with this symbol, which may

include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return

the battery to your supplier or to a designated collection point. For more information see:

www.recyclethis.info

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

Vision Box User Manual

4

Applicable Models

This manual is applicable to the MV-VB2100-032/120G Vision Box.

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Provides additional information to emphasize or supplement
important points of the main text.

Indicates a potentially hazardous situation, which if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.

Indicates a hazard with a high level of risk, which if not avoided, will
result in death or serious injury.

Vision Box User Manual

5

Safety Instructions

 Proper configuration of all passwords and other security settings is the responsibility of the

installer and/or end-user.

 In the use of the product, you must be in strict compliance with the electrical safety

regulations of the nation and region. Please refer to technical specifications for detailed
information.

 Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power

Source with 100~240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to
technical specifications for detailed information.

 Do not connect several devices to one power adapter as adapter overload may cause

over-heating or a fire hazard.

 Please make sure that the plug is firmly connected to the power socket.
 If smoke, odor or noise rise from the device, turn off the power at once and unplug the power

cable, and then please contact the service center.

Preventive and Cautionary Tips

Before connecting and operating your device, please be advised of the following tips:

 Ensure unit is installed in a well-ventilated, dust-free environment.
 Unit is designed for indoor use only.
 Keep all liquids away from the device.
 Ensure environmental conditions meet factory specifications.
 Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of

dropping it may cause damage to the sensitive electronics within the unit.

 Use the device in conjunction with an UPS if possible.
 You shall acknowledge that the use of the product with Internet access might be under

network security risks. For avoidance of any network attacks and information leakage, please
strengthen your own protection. If the product does not work properly, please contact with
your dealer or the nearest service center.

 Power down the unit before connecting and disconnecting accessories and peripherals.
 Improper use or replacement of the battery may result in hazard of explosion. Replace with

the same or equivalent type only. Dispose of used batteries according to the instructions
provided by the battery manufacturer.

Vision Box User Manual

6

Chapter 1 Overview

1.1 Introduction

Designed for the control system, the Vision Box has integrated with the various interfaces and
image processing algorithms in the machine vision applications, featuring stable performance,
compact structure, fast response, etc. The Box adopts the Intel® AtomTM E3845 Quad-core SoC
processor, with the excellent computing performance, low consumption and outstanding system
expandability.

It can be widely applied to the robots, medical instruments, laser equipment, numerical control
machine tools, package test, etc.

1.2 Features

 Onboard Intel E3845 SOC, 1.91GHz CPU, providing 200% CPU and 350% GPU performance

more than the last-generation D525/D2550 processor.

 Adoption of Gen7 GPU greatly enhances the image processing performance.
 Compact structure design
 4GB DDR3L memory
 -10 ºC to +50 ºC fanless working temperature
 Two Intel-chip Gigabit network interfaces, with the enhanced surge-protection design to

ensure the stable access by machine vision cameras.

 Two independent HDMI video outputs.
 8 GPIO.

1.3 Specifications

Model

MV-VB2100-032G

MV-VB2100-120G

Processor

Intel E3845 chip, 4-core 1.91GHz

Memory

4GB DDR3L-1333

Operating System

Win7, Win8, Linux

Graphic/Video

Gen7 GPU

Hardware accelerated H.264 video encoding

Hardware accelerated multiple video decoding
formats