HIKVISION DS-8100HMI-STM, DS-8100HMI-SE User Manual

Mobile Digital Video Recorder

User Manual

UD.6L0204D1015A01

User Manual of DS-8100HMI-STM Series Mobile DVR

1

Hikvision® Network Digital Video Recorder User Manual

This manual, as well as the software described in it, is furnished under license and may be used or copied only in accordance
with the terms of such license. The content of this manual is furnished for informational use only, is subject to change
without notice, and should not be construed as a commitment by Hikvision Digital Technology Co., Ltd. (Hikvision).
Hikvision assumes no responsibility or liability for any errors or inaccuracies that may appear in the book.

Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, electronic, mechanical, recording, or otherwise, without the prior written
permission of Hikvision.

HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING
THE HIKVISION SOFTWARE. HIKVISION DOES NOT WARRANT, GUARANTEE, OR MAKE ANY
REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE HIKVISION SOFTWARE IN
TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY, CURRENTNESS, OR OTHERWISE. THE ENTIRE
RISK AS TO THE RESULTS AND PERFORMANCE OF THE HIKVISION SOFTWARE IS ASSUMED BY YOU. THE
EXCLUSION OF IMPLIED WARRANTIES IS NOT PERMITTED BY SOME STATES. THE ABOVE EXCLUSION
MAY NOT APPLY TO YOU.

IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU
FOR ANY CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES (INCLUDING DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, AND THE LIKE)
ARISING OUT OF THE USE OR INABILITY TO USE THE HIKVISION SOFTWARE EVEN IF HIKVISION HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE
LIMITATIONS MAY NOT APPLY TO YOU.

User Manual of DS-8100HMI-STM Series Mobile DVR

2

Thank you for purchasing our product. This manual applies to DS-8100HMI-STM series Mobile DVR, please read it
carefully for the better use of the device.

This manual may contain several technical incorrect places or printing errors, and the content is subject to change without
notice. The updates will be added to the new version of this manual. We will readily improve or update the products or

procedures described in the manual.

User Manual of DS-8100HMI-STM Series Mobile DVR

3

Regulatory information
FCC information

FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.

FCC conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the
applicable harmonized European standards listed under the Low Voltage Directive 2006/95/EC, the EMC Directive
2004/108/EC, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste
in the European Union. For proper recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collection points. For more information see:

www.recyclethis.info.

2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal
waste in the European Union. See the product documentation for specific battery information. The battery is marked
with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper
recycling, return the battery to your supplier or to a designated collection point. For more information see:

www.recyclethis.info.

User Manual of DS-8100HMI-STM Series Mobile DVR

4

Preventive and Cautionary Tips

Before connecting and operating your device, please be advised of the following tips:
 The installation of mobile DVR must be done by qualified automobile assembly manufacturers or dealers. And

the device should be installed at well-ventilated location inside the automobile.

 Please make yourself be familiar with the power connection before installation.
 A factory recommended SD card should be used for this device.
 The wireless and satellite positioning antennas should be installed on the location with high signal strength and

lightning protection measures. And make sure the antennas are not covered or blocked by any other object.
When both the master and slave antennas are connected, locate them vertically with above 20cm distance from
each other.

 The device contains no user-serviceable parts. Do not disassemble the device for repair or maintenance by

yourself.

 If you encounter any questions about this device, please contact the technicians from HIKVISION or its

authorized suppliers.

User Manual of DS-8100HMI-STM Series Mobile DVR

5

Product Key Features

Main Features

 Newly-featured GUI with easy and flexible operation.
 The first channel supports up to 4CIF real-time encoding and other channels support CIF real-time encoding.
 H.264 (standard) video compression with high reliability and superior definition.
 Two pluggable SD cards are connectable, each card with a maximum of 32GB storage capacity.
 Power-off protection of data with the built-in redundant power supply.
 Built-in 3G (WCDMA/CDMA2000) module.
 Built-in high-sensitivity satellite positioning module.
 Interfaces are provided for recording driving information of the vehicle‟s turning left/right, braking, reversing,

etc.

 Aviation connectors adopted for all video input/output, audio input/output and power supply, ensuring high

stability of signal connection.

 Delay (0min~6h) shutdown and 24-hour scheduled startup/shutdown configurable.
 Wide-range power input (+6 VDC ~+36 VDC).
 Aluminum chassis.

Local Monitoring

 1/4-division live view is supported, and the display sequence of screens is adjustable.
 The selected live view channel can be shielded.
 Motion detection, tamper-proof, video exception alarm and video loss alarm functions.
 Privacy mask.

Record and Playback

 Each camera can be configured with normal and event compression parameters. Sub-stream can be configured

locally.

 Multiple recording types: normal, alarm, motion, motion | alarm, motion & alarm.
 8 recording time periods with separate recording types configurable.
 Pre-record and post-record for alarm and motion detection for recording.
 Search and play back record files by channel number, recording type, start time, end time, etc.
 Support pause, fast forward, slow forward, skip forward, and skip backward when playback.

Backup

 Export video data by USB device.
 Management and maintenance of backup devices.

Alarm and Exception

 Management of alarm input/output.
 Management of alarm for video loss, motion detection, video tampering.
 Configurable arming time of alarm input/output.

User Manual of DS-8100HMI-STM Series Mobile DVR

6

 Alarm for video loss, motion detection, tampering, video input/output standard mismatch, illegal login, network

disconnected, IP confliction, SD card error, and SD card full.

 Alarm triggers full screen monitoring, audio alarm and alarm output. Motion detection and alarm can trigger

recording. Exception can trigger audio alarm and alarm output.

 Automatic restore when system is abnormal.

Other Local Functions

 Two-level user management; admin user is allowed to create many operator accounts.
 Operation, alarm, exceptions and log recording and searching.
 Import and export of device configuration file.

Network Functions

 1 self-adaptive 10M/100M network interface.
 WCDMA and CDMA2000 supported.
 WiFi supported.
 Remote configuration and operation by iVMS platform and WVS platform.
 TCP/IP protocol, DHCP, DNS, NTP, and SADP are supported.
 Remote search, playback, download of record files.
 Remote parameters setup; remote import/export of device parameters.
 Remote viewing of the device status, system logs and alarm status.
 RS-232, RS-485 parameters configuration and transparent channel transmission.

Development Scalability:

 SDK for Windows and Linux system.
 Development support and training for application system.

User Manual of DS-8100HMI-STM Series Mobile DVR

7

TABLE OF CONTENTS

Hikvision® Network Digital Video Recorder User Manual ...................................................................... 1

Chapter 1 ............................................................................................................................................ 9

Introduction ........................................................................................................................................ 9

1.1 Front Panel and Rear Panel ................................................................................................................. 10

1.1.1 Front Panel ................................................................................................................................... 10

1.1.2 Rear Panel ..................................................................................................................................... 11

1.1.3 Pin Definition of Interfaces ........................................................................................................... 11

1.2 IR Remote Control Operations............................................................................................................. 13

1.3 Starting Up and Shutting Down the DVR ............................................................................................. 15

1.3.1 Vehicle Ignition Startup ................................................................................................................ 15

1.3.2 Timing On/Off ............................................................................................................................... 17

1.4 Connecting to Alarm Input / Output Device ........................................................................................ 17

1.5 SD Card Installation ............................................................................................................................. 18

1.6 SIM / UIM Card Installation ................................................................................................................. 18

Chapter 2 .......................................................................................................................................... 19

Basic Operations ................................................................................................................................ 19

2.1 Main Menu .......................................................................................................................................... 20

2.2 Managing User Accounts ..................................................................................................................... 20

2.3 Configuring Display Settings ................................................................................................................ 21

2.4 Configuring Cameras ........................................................................................................................... 23

2.5 Configuring Preview Settings ............................................................................................................... 24

Chapter 3 .......................................................................................................................................... 26

Record Settings.................................................................................................................................. 26

3.1 Configuring Encoding Parameters ....................................................................................................... 27

3.1.1 Initializing SD Cards ...................................................................................................................... 27

3.1.2 Configuring Record Settings ......................................................................................................... 27

3.2 Configuring Motion Detection Record ................................................................................................ 29

3.3 Configuring Alarm Triggered Record ................................................................................................... 31

3.4 Searching Record Files ......................................................................................................................... 31

Chapter 4 .......................................................................................................................................... 33

Wireless Network Settings ................................................................................................................. 33

4.1 Configuring 3G ..................................................................................................................................... 34

4.2 Configuring WiFi .................................................................................................................................. 35

Chapter 5 .......................................................................................................................................... 37

Platform Settings ............................................................................................................................... 37

5.1 Accessing by the WVS Platform ........................................................................................................... 38

User Manual of DS-8100HMI-STM Series Mobile DVR

8

5.2 Accessing by the iVMS Platform .......................................................................................................... 38

5.3 Accessing by the Push Mode Platform ................................................................................................ 39

Chapter 6 .......................................................................................................................................... 40

Special Functions ............................................................................................................................... 40

6.1 Configuring Startup and Shutdown ..................................................................................................... 41

6.2 Configuring Satellite Positioning ......................................................................................................... 42

6.3 Configuring G-Sensor........................................................................................................................... 43

6.4 Configuring Sensor-In .......................................................................................................................... 43

Chapter 7 .......................................................................................................................................... 45

Other Functions ................................................................................................................................. 45

7.1 Configuring Network Settings ............................................................................................................. 46

7.2 Configuring Alarm................................................................................................................................ 47

7.2.1 Configuring Alarm Input ............................................................................................................... 47

7.2.2 Configuring Alarm Output ............................................................................................................ 48

7.2.3 Detecting Video Tampering .......................................................................................................... 49

7.2.4 Detecting Video Loss .................................................................................................................... 51

7.2.5 Handling Exceptions ..................................................................................................................... 52

7.3 Configuring Serial Port ......................................................................................................................... 53

Chapter 8 .......................................................................................................................................... 54

Device Management and Maintenance .............................................................................................. 54

8.1 Checking Status ................................................................................................................................... 55

8.2 Management and Maintenance .......................................................................................................... 55

8.2.1 Upgrading the System ................................................................................................................... 55

8.2.2 Searching & Exporting Log files .................................................................................................... 57

8.2.3 Restoring Default Settings ............................................................................................................ 58

8.2.4 Importing/Exporting Configuration Files ...................................................................................... 58

8.2.5 Viewing System Information ........................................................................................................ 59

8.2.6 Backup Device .............................................................................................................................. 59

8.2.7 Rebooting DVR ............................................................................................................................. 60

Appendix .......................................................................................................................................... 61

Glossary ..................................................................................................................................................... 61

FAQ ............................................................................................................................................................ 62

User Manual of DS-8100HMI-STM Series Mobile DVR

9

9

Chapter 1

Introduction

User Manual of DS-8100HMI-STM Series Mobile DVR

10

10

1.1 Front Panel and Rear Panel

1.1.1 Front Panel

The front panel of DS-8100HMI-STM is shown in figure below.

Figure 1. 1 Front Panel

Note: After opening the front panel lock, you can see the interfaces shown above.

Table 1. 1 Description of Front Panel

No.

Name

Description

1

ON/OFF

Power switch for turning on / off the DVR.

2

SD1/SD2

SD card slots for installing two SD cards.

3

POWER indicator

Red means the device is standby; green means the DVR starts up normally.

4

RECORD indicator

Green means recording now.

5

IR receiver

Receiver for IR remote control. Please make sure the receiver is unblocked by any object.

6

USB

USB port.

7

LAN

Network interface.

8

SIM/UIM

SIM/UIM card slot.

User Manual of DS-8100HMI-STM Series Mobile DVR

11

11

1.1.2 Rear Panel

Figure 1. 2 Rear Panel

Note: The descriptions are subject to the physical product.

Table 1. 2 Description of Rear Panel

No.

Name

Description

1

POWER

6-pin aviation plug for voltage input and ACC signal.

2

RS232

5-pin aviation plug for RS-232 serial interface.

3

A/V OUT

4-pin aviation plug for video and audio composite output.

4

CH1/2/3/4

4-pin aviation plug for audio &video input of channel1/2/3/4.

5

RS422

10-pin aviation plug for RS-422 interface.

6

ALARM & SENSOR

IN

3 alarm inputs, 2 alarm outputs and 4 Sensor In interfaces for collecting driving
information.

7

3G (ANT1/ANT2)

Master/slave 3G antenna.

8

GPS (ANT3)

GPS antenna.

9

WIFI (ANT4)

WIFI antenna (reserved).

1.1.3 Pin Definition of Interfaces

 Pin Definition of Alarm & Sensor In Interface

User Manual of DS-8100HMI-STM Series Mobile DVR

12

12

Figure 1. 3 Pin Definition of Alarm & Sensor In Interface

 Pin Definition of RS422 Interface

Figure 1. 4 Pin Definition of RS422 Interface

 Pin Definition of CH1/2/3/4 Interface

Figure 1. 5 Pin Definition of CH1/2/3/4 Interface

 Pin Definition of A/V OUT Interface

Figure 1. 6 Pin Definition of A/V OUT Interface

User Manual of DS-8100HMI-STM Series Mobile DVR

13

13

1.2 IR Remote Control Operations

The device may also be controlled with the included IR remote control, shown in Figure 1.7.

Figure 1. 7 Remote Control

The description of buttons on the remote control is shown in Table 1.3.

Table 1. 3 Description of the IR Remote Control Buttons

No.

Name

Description

1

Power

Reserved

2

DEV

Input device number.

3

Number keys

1. Input number, symbol, and character.

2. Switch to the corresponding channel in Live View mode.

User Manual of DS-8100HMI-STM Series Mobile DVR

14

14

4

Edit

1. Enter the edit status, and then delete the character in the front of the

cursor.

2. It can also be used to tick checkbox.

3. In Playback mode, it can be used to generate video clips for backup.

5

A

Switch between input methods (Number, English, symbol) when in the edit
status.

6

REC

Reserved

7

PLAY

Enter video search interface

8

INFO

Reserved

9

VOIP/MON

Reserved

10

MENU

Enter Main menu interface.

11

PREV

Switch between single screen and multi-screen mode.

12

Direction keys

Up, Down, Left, Right

1. The DIRECTION buttons are used to navigate between different fields

and items in menus.

2. In the playback interface, they are used for fast forward, slow forward,

rewind.

3. In Live View mode, these buttons can be used to switch channel(s).

ENTER

1. The ENTER button is used to confirm selection in any of the menu

modes.

2. It can also be used to tick checkbox.

3. In Playback mode, it can be used to play or pause the video.

4. In Auto-switch mode, it can be used to stop /start auto switch.

13

PTZ

Reserved

14

ESC

Back to the previous menu.

15

Reserved

16

F1

In video search interface, it can be used to select all record files.

17

Lens Control

Reserved

18

F2

Reserved

Troubleshooting Remote Control:

Note: Make sure you have installed batteries properly in the remote control. And you have to aim the remote control at the IR

receiver in the front panel.

If there is no response after you press any button on the remote, follow the procedure below to troubleshoot.

Steps:

User Manual of DS-8100HMI-STM Series Mobile DVR

15

15

1. Run the Client Management System to check and remember device ID#.

2. The default ID# is 255. This ID# is valid for all the IR remote controls.

3. Press the DEV button on the remote control.

4. Enter the device ID# from step 2.

5. Press the ENTER button on the remote.

If the Status indicator on the front panel turns blue, the remote control is operating properly. If the Status indicator does not
turn blue and there is still no response from the remote, please check the following:

1. Batteries are installed correctly and the polarities of the batteries are not reversed.

2. Batteries are fresh and not out of charge.

3. IR receiver is not obstructed.

If the remote still can‟t function properly, please change a remote and try again, or contact the device provider.

1.3 Starting Up and Shutting Down the DVR

There are two ways to start up the DVR: startup with vehicle ignition and time-delay shutdown, and timing on/off.

Note: You can also use the power switch on the front panel to turn on or off the device. If you want to use the following

two ways to start up the device, please turn on the power switch first.

1.3.1 Vehicle Ignition Startup

There are two kinds of vehicle ignition switch: positive pole ignition switch and negative pole ignition switch. For
detailed time-delay shutdown, please refer to Chapter 6.1.

Notes:

1. Please contact the vehicle manufacturer for the information about the connecting mode of starting switch.

2. Positive pole ignition switch is used by most cars.

Positive pole ignition switch

Figure 1. 8 Positive Pole Ignition Switch

User Manual of DS-8100HMI-STM Series Mobile DVR

16

16

Ignition switch is connected to the positive pole of DC+12/24V of vehicle batteries. Please make sure that the
connection is correct, and then follow the procedure below:

Steps:

1. Connect the “DC IN +” of DVR to the positive pole of vehicle batteries;

2. Connect the “DC IN -” and “KEY -” to the negative pole of vehicle batteries;

3. Connect the “KEY +” of DVR to the vehicle ignition switch;

4. When switching on the vehicle, the DVR starts up with the vehicle.

Negative pole ignition switch

Figure 1. 9 Negative Pole Ignition Switch

Ignition switch is connected to the negative pole of DC+12/24V of vehicle batteries. Please make sure that the
connection is correct, and then follow the procedure below:

Steps:

1. Connect the “DC IN +” and “KEY +” of DVR to the positive pole of vehicle batteries;

2. Connect the “DC IN -” to the negative pole of vehicle batteries;

3. Connect the “KEY -” of DVR to the vehicle ignition switch;

4. When switching on the vehicle, the DVR starts up with the vehicle.

User Manual of DS-8100HMI-STM Series Mobile DVR

17

17

1.3.2 Timing On/Off

Figure 1. 10 Timing On/Off

Please follow the procedure below:

Steps:

1. Connect the “DC IN +” and “KEY +” of DVR to the positive pole of vehicle batteries;

2. Connect the “DC IN -” and “KEY -” of DVR to the negative pole of vehicle batteries;

Note: For detailed information about automatically starting up and shutting down the DVR, please see Chapter 6.1.

1.4 Connecting to Alarm Input / Output Device

Connecting to Alarm Input

DS-8100HMI-STM series Mobile DVR adopts the high/low-level electrical signals triggering (high level: 6~36 VDC;
low level: 0~5 VDC) to realize alarm input. And in order to avoid error report caused by voltage fluctuation, no
alarm will be triggered by voltage ranging of 5~ 6VDC. Alarm input and Mobile DVR must be with common
grounding.

Figure 1. 11 Alarm Input Connection

Connecting to Alarm Output

The contact closure signal is used for the alarm output triggering. When there is an alarm output triggered, the
contact A and B of the Alarm Output will be closed. Therefore, the active alarm device must be connected.

User Manual of DS-8100HMI-STM Series Mobile DVR

18

18

Figure 1. 12 Alarm Output Connection

1.5 SD Card Installation

Notes:

1. Please disconnect the power before and during the SD card installation.

2. A factory recommended SD card should be used for this installation.

3. After installation, please initialize the SD card before recording. Please refer to Chapter 3.1.1 for detailed

information.

Steps:

1. Insert the key and turn in counterclockwise direction to open the front panel lock.

2. Insert the SD card horizontally to the corresponding slot according to the cut position shown on the front panel.

Note: You can push the SD card to check whether the card is installed properly. If the card can pop up

automatically, it means it is well installed.

Figure 1. 13 SD Card Installation

1.6 SIM / UIM Card Installation

Please insert a SIM/UIM card to access to the 3G network.

Note: Please disconnect the power before and during the SIM/UIM card installation.

Steps:

1. Insert the key and turn in counterclockwise direction to open the front panel lock.

2. Press the yellow release button on the left side to get access to the SIM/UIM card holder.

3. Pull out the card holder and insert the SIM/UIM card.

4. Push the SIM/UIM card holder back into the slot.

User Manual of DS-8100HMI-STM Series Mobile DVR

19

19

Chapter 2

Basic Operations