HIKVISION DS-8002AHLI-S, DS-8000AHLI, DS-8004AHI-S, DS-8004AHLI-S, DS-8004AHFLI-S User Manual
...
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
User Manual
(V2.1)
Thank you for purchasing our DS-8000AHI/AHLI/AHFLI-S embedded Net DVR. This
manual is applicable to DS-8000AHI/AHLI/AHFLI-S series embedded Net DVR. Please read this
User Manual carefully to ensure that you can use the device correctly and safely.
The contents of this manual are subject to change without notic e.
Page 1 Total 116
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
Index
Attentions .......................................................................................................................................... 4
Chapter1 Product Introduction .................................................................................................. 5
1.1 Summary ................................................................................................................... 5
1.2 Features ..................................................................................................................... 5
Chapter2 Installation ................................................................................................................. 8
2.1 Checking the DVR and Its Accessories ..................................................................... 8
2.2 HDD Installation ....................................................................................................... 8
2.3 Rear Panel Description .............................................................................................. 9
Chapter3 Operational Instructions .......................................................................................... 13
3.1 Front Panel .............................................................................................................. 13
3.1.1 DS-8000AHI-S Front Panel ............................................................................ 13
3.1.2 DS-8000AHLI/AHFLI-S Front Panel ............................................................. 15
3.2 IR Controller ........................................................................................................... 18
3.3 Menu Description .................................................................................................... 20
3.3.1 Menu Items ..................................................................................................... 20
3.3.2 Menu Operation .............................................................................................. 21
3.4 Character Input ........................................................................................................ 22
Chapter4 Basic Operation Guide ............................................................................................ 24
4.1 Power on ................................................................................................................. 24
4.2 Preview .................................................................................................................... 24
4.3 User name and password ......................................................................................... 27
4.4 PTZ Control ............................................................................................................ 29
4.5 Manual Record ........................................................................................................ 31
4.6 Playback .................................................................................................................. 32
4.7 Backup Recorded Files ........................................................................................... 37
4.8 Voice Talk ................................................................................................................ 41
4.9 Shut down DVR ...................................................................................................... 41
Chapter5 Parameters Setup Guide .......................................................................................... 43
5.1 Administrator and Password ................................................................................... 43
5.2 Add and Delete User ............................................................................................... 45
5.3 Unit Name and Device ID ....................................................................................... 49
5.4 V ideo Ou tp ut Standard and VGA Setup .................................................................. 50
5.5 OSD Setup ............................................................................................................... 51
5.6 Video Parameters Setup .......................................................................................... 54
5.7 Mask Area Setup ..................................................................................................... 55
5.8 V iew Tampering Alarm ........................................................................................... 57
5.9 V ideo Loss Alarm .................................................................................................... 59
5.10 Motio n Detection Alarm ......................................................................................... 61
5.11 Preview Properties .................................................................................................. 65
5.12 Recording Setup ...................................................................................................... 66
5.13 External Alarm Input and Relay Output .................................................................. 70
5.14 Network Parameters ................................................................................................ 74
5.15 PTZ ......................................................................................................................... 77
Page 2 Total 116
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
5.16 RS232 setup ............................................................................................................ 82
5.17 Exceptions ............................................................................................................... 87
5.18 Transaction Information .......................................................................................... 88
Chapter6 Utilities .................................................................................................................... 92
6.1 Save Parameters ...................................................................................................... 92
6.2 Restore Parameters .................................................................................................. 93
6.3 Upgrade ................................................................................................................... 93
6.4 Hard Disk Management .......................................................................................... 94
6.5 Clear Alarm Out ...................................................................................................... 95
6.6 Reboot ..................................................................................................................... 95
6.7 Power Off ................................................................................................................ 95
6.8 View Log ................................................................................................................. 95
6.9 System Information ................................................................................................. 97
Chapter7 Firmware Upgrade .................................................................................................. 98
7.1 FTP Server Setup .................................................................................................... 98
7.2 Upgrade Mode ....................................................................................................... 101
Appendix A HDD Capacity Calculation ................................................................................... 102
Appendix B DVR Connect Cable Definition ............................................................................ 103
Appendix C Specification .......................................................................................................... 107
Appendix D Quick Search Function Table ................................................................................ 110
Appendix E Troubleshooting .................................................................................................... 112
Appendix F Product Service ..................................................................................................... 114
Appendix G Customer Information Card .................................................................................. 115
Page 3 Total 116
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
Attentions
Before using the product, please make sure that:
Please don’t place container filled with liquid on the product.
Please keep the device enough space for ventilation.
Please make sure the product works in proper temperature and humidity.
Regularly clean the circuit board, connectors, fans, and chassis by banister brush in order to
avoid short circuit caused by damp dust.
CAUTION
Danger of explosion if battery is incorrectly replaced
Replace only with the same or equivalent type
Page 4 Total 116
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
Chapter1 Product Introduction
1.1 Summary
DS-8000AHI/AHLI/AHFLI-S series network digital video recorder is an excellent digital
product special for ATM/POS surveillance. It adopts the embedded MCU and embedded operating
system, combining the most advanced technology in the Information Industry such as video and
audio encoding/decoding, hard disk record and TCP/IP. The firmware is burned into the flash,
making the system more stable and reliable.
DS-8000AHI/AHLI/AHFLI-S series device has the features of both digital video recorder
(DVR) and digital video server (DVS). It can work stand alone, and also be used to build a
powerful surveillance network.
1.2 Features
Compression
Support up to 4 channnels video input (PAL/NTSC). Each channel is independent with
H.264 hardware compression and real time (PAL: 25 FPS, NTSC: 30FPS). Support both
variable bitrate and variable frame rate.
Support up to 4 channels audio input. Each channel is independent with OggVorbis
compression at 16Kbps.
Compressed video and audio are synchronous. You can select either composited stream
or video-only stream.
DS-8000AHI-S and DS-8000AHLI-S support CIF and QCIF res olution.
DS-8000AHFLI-S support 4CIF resolution real time
Support multi-area motion detecti on.
Support OSD and changeable OSD position.
Support dual stream.
Local functions
Record
Support multiple record type, including schedule recording, manual recording, motion
detection, external alarm, motion&alarm, motion|alarm.
Support 4 SATA HDDs and each HDD can support 2000GB.
Support FAT32 file system
Support HDD S.M.A.R.T technology.
Support cycle or none cycle record.
Support NAS Recording
Page 5 Total 116
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
Support Event Recording Para. Setup
Support backup the recorded files and clips with USB memory, USB HDD, USB
CD-R/W and USB DVD-R/W.
Preview and playback
Support BNC analog moniotor and VGA output.
Support user-defined preview layout
Support privacy mask
Support view tampering alert
Support video signal loss alert
Support 2-ch synchronous playback.
Support play forward, backward, pause, frame by frame, etc.
Support play back by files or by time.
Display local record status.
PTZ
Support various PTZ protocols
Support preset, sequence and cruise
Alarms
Support exception alarm, motion detection alarm, external alarm, etc.
Others
Support IR control.
Support RS-485 keyboard.
Support multi-level user management.
Support multiple upgrade modes, including FTP, USB and CD.
Automatically recovery from abnormal conditions.
Network
Support Advanced Network Function: NTP, DDNS and E-mail
Support TCP, UDP, R TP, and Multicast for network preview.
Support PPPoE for board band dialup.
Support PSTN for narrow band dialup.
Support remote parameters setup.
Alarm information can be sent to remote center.
Network control PTZ.
Network record the real time stream.
Network download and playback the recorded files in DV R.
Remote upgrade the firmware.
RS-232 supports transparent channel function so that the remote PC can use DVR to
Page 6 Total 116
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
control serial devices.
Support SADP protocol
Support bi-direction voice talk or one-way voice broadcast.
Support IE to preview and configure DVR.
Support remote log query
Development support
Provide network SDK.
Provide client demo source code.
Page 7 Total 116
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
Chapter2 Installation
Warning: Before you install the DVR, please make sure the power of DVR is switched
off.
2.1 Checking the DVR and Its Accessories
When you get the product, check that all the items are included in your product package.
There is a list in the package. If any of the items is missing, please contact your dealer.
2.2 HDD Installation
Installation notice
Note: A factory recommended HDD should be used for this device.
The DVR has not HDD when leaving factory. Based on the record schedule, you can
calculate the total capacity you need (refer to Appendix A). Please ask the specialist to
disassembly the DVR and install HDD.
Installation instrument
One cross screw driver
HDD installation
1. Open the DVR box.
2. If you want to install 2 HDD for one SATA interface, please set master and slaver HDD.
3. Take off the HDD mounting plate.
4. Place the HDD on the mounting plate and fix it with screw.
5. Fix the mounting plate in the D V R.
6. Connect the ATA data cable correctly. The cable has three connctors for DVR main board,
master HDD and slaver HDD.
7. Plug the HDD power connector.
8. Cover and fix the DVR box.
Note: After you install the HDD, you must format them. Please refer to section 6.4.
Page 8 Total 116
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
In1 provides DC +12V/1A for sensor; Pin2
2.3 Rear Panel Description
Notice: Please refer to real product for different model.
Take DS-8004AHL-S for example:
Index Physical Interface Description
1
Power Adapter
2
Power Output
3
External Alarm In
4
Alarm Output
5
VOUT
ATX Standard. 220V or 110V option.
DC Output +12V/1A for camera.
Pin1 of Alarm
is GND; Pin3 is used to connect approaching sensor.
AlarmIn2, In3, In4 and In5 are switch trip.
Out1: Pin1 provides DC +12V/1A output; Pin2 is GND.
Out2: Relay output (switch trip).
Local video output, BNC interface.
Page 9 Total 116
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
6
7
8
9
10
11
12
13
14
15
VIN
AIN
AOUT
USB Interface
VGA Interface
UTP Network Interface
Line In
RS-485
RS-232
Output for Backup
4 video input, BNC interface.
4 audio input, BNC interface. The 4th audio input is also
used as Line in for voice talk.
Audio output, BNC interface
Connecting USB memory disk, USB HDD, USB CD-R/W
Connecting VGA display .
Connecting network devices. Refer to Appendix B for pin
definition.
Use 4th audio input instead.
PTZ connection. Refer to Appendix B for pin definition.
Connecting RS-232 devices. Refer to Appendix B for pin
definition.
Connecting analog recording device for backup.
Page 10 Total 116
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
2.4 Connecting to alarm in/out device
The alarm input is switch signal，if the alarm input is not switch signal, such as voltage signal,
then please follow the connection method below.
If alarm output interfaces are connect to DC/AC load, then please refer the suggestion below.
Please pay attention to the different application of JP4 in these applications. If the interface is
connected with DV load, JP4 can be used in these two methods safely, and suggest that this should
be used within the limit of 12V/1A. if the interface is connect with AC load, then JP4 should be
cut off, unplug the short circuit object. Please use external relay for safety. (as shown in the figure)
There are 4 short circuit objects in the mother board, every alarm output interface correspond
one of them, and they are JP4, JP5, JP6 and JP7. It is short circuited after the DVR is produced, so
these short circuit objects should be unplugged when AC load is connected.
Attention! If the alarm output interface is used for control the AC circuit, short circuit
objects on mother should be unplugged, and external relay is needed to make sure the safety
of device, and prevent electric shock.
Page 11 Total 116
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
Illustration of cable connection
Device supplies the curved needle plug for signal cable connection, here is the process：
1、unplug the green Curved needle plug in the ALARM IN and ALARM OUT interface;
2、un-fasten the screws in the curved needle plug, then put the signal cable into little metal
box and then fasten the screws.
3、connect these curved needle plugs with the interface.
Page 12 Total 116
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
network transmission; Orange means recording and network
Chapter3 Operational Instructions
3.1 Front Panel
3.1.1 DS-8000AHI-S Front Panel
Index Type Name Description
1 Status
Lamps
READY
STATUS
ALARM
MODEM
HDD
LINK
Tx/Rx
CH1
DVR is ready.
Green means you can use IR remote control.
Red means there is alarm.
Green means modem connection and dial-up successful.
Twinkle in red means reading or writing HDD.
Green means network is OK.
Twinkle in green means data is being transmitted
Channel1 working status. Green means recording; Red means
Page 13 Total 116
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
network transmission; Orange means recording and network
network transmission; Orange means recording and network
network transmission; Orange means recording and network
Press [MENU] for more than 5 seconds to cancel button
Input switch (number, lower case, upper case and
CH2
transmission.
Channel2 working status. Green means recording; Red means
CH3
transmission.
Channel3 working status. Green means recording; Red means
CH4
transmission.
Channel4 working status. Green means recording; Red means
transmission.
2 POWER POWER Device switch with power indicator lamp. Green means DVR
is working; Red means DVR is powered off; No light means
no power is supplied.
3 Function
Keys
4 Shortcut
Keys
MENU
VOIP
INFO
ESC
EDIT
PLAY
REC
PTZ
PREV
A
1. Switch preview mode into menu;
2. Brush control short key【WIPER】.
3.
beep sound.
【ZOOM-】in PTZ control.
【ZOOM+】in PTZ control.
Cancel and back to parent menu.
1. In edit state, delete the current cursor character;
2. 【IRIS+】in PTZ control;
3. Select or × to enable or disable.
1. Local playback;
2. 【AUTO】in PTZ control.
1. Manual record;
2. 【SHOT】in PTZ control (adjust preset).
1. Enter into PTZ control mode;
2. 【IRIS-】in PTZ control.
1. Multi screen preview switch;
2. Switch menu mode into preview;
3. 【FOCUS-】in PTZ control.
1.
2. 【FOCUS+】in PTZ control;
3. In preview mode, display or hid e the ch an nel status bar .
5 Control
Keys
Direction
Keys
Composed of 【】,【】,【】 and 【】.
1. Menu mode, use【】/【】 to select,【】/【】 to
edit;
2. PTZ direction control;
3. Playback speed control.
6 Control
Keys
ENTER 1. Menu confirmation;
2. Select or × to enable or disable;
symbol);
Page 14 Total 116
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
means DVR is powered off. No light means no power is
The lamp is on means you can use compound keys as
3. Pause playback.
7 Input Keys Numeric
Keys
Input number, lower cas e, u pper case character and symbols.
3.1.2 DS-8000AHLI/AHFLI-S Front Panel
Index Type Name Description
1 Status
Lamps
POWER
READY
STATUS
ALARM
MODEM
HDD
LINK
Tx/Rx
NUMLOCK
Power indicator lamp. Green means DVR is working; Red
supplied.
DVR is ready.
Green means you can use IR remote control.
Red means there is alarm.
Green means modem connection and dial-up successful.
Twinkle in red means reading or writing HDD.
Green means network is OK.
Twinkle in green means data is being transmitted
numeric keys to input numeral or English characters. The
Page 15 Total 116
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
lamp is off means the compound keys can be used as
Channel1 working status. Green means recording; Red
means network transmission; Orange means recording and
Channel2 working status. Green means recording; Red
Channel3 working status. Green means recording; Red
means network transmission; Orange means recording and
Channel4 working status. Green means recording; Red
function keys. You can use【SHIFT】key to switch.
CH1
network transmission.
CH2
means network transmission; Orange means recording and
network transmission.
CH3
network transmission.
CH4
means network transmission; Orange means recording and
network transmission.
2 Control
Keys
Direction
Keys
Composed of 【】,【】,【】 and 【】.
1. Menu mode, use【】/【】 to select,【】/【】
ENTER
2. PTZ direction control;
3. Playback speed control.
1. Menu confirmation;
2. Select or × to enable or disable;
3. Pause playback.
3 POWER POWER Power switch.
4 Switch
Key
5 Compound
Keys
6 LCD Display For local display.
Note: Please refer to DS-8000AHI-S about the compound keys functions.
SHIFT Switch between function keys and numeric keys. The lamp
of NUMLOCK will display the status.
MENU/1
VOIP/2
INFO/3
ESC/4
EDIT/5
PLAY/6
REC/7
PAN/8
PREV/9
A/0
Composite of【MENU】and【1】.
Composite of【VOIP】,【2】and【ABC】.
Composite of【INFO】,【3】and【DEF】.
Composite of【ESC】,【4】and【GHI】.
Composite of【EDIT】,【5】and【JKL】.
Composite of【PLAY】,【6】and【MNO】.
Composite of【REC】,【7】and【PQRS】.
Composite of【PAN】,【8】and【TUV】.
Composite of【PREV】,【9】and【WXYZ】.
Composite of【A】and【0】.
Examples of compound keys’ usage:
Used as function keys:
If the lamp of NUMLOCK is off, the compounds keys can be used as function keys. They are
defined as【MENU】, 【VOIP】, 【INFO】, 【ESC】, 【EDIT】, 【PLAY】, 【REC】, 【PAN】,
to edit;
Page 16 Total 116
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
【PREV】and【A】. Press【SHIFT】key to turn off NUMLOCK lamp when the lamp is on.
Used as numeric keys:
Press【SHIFT】to turn on NUMLOCK lamp when the lamp is off. In “Preview” and “PTZ
control” mode, the compound keys can be used as numeric keys to select channel. In “Edit” mode,
only in “Number” and “Symbol” input status (as following), you can use compound keys as
numeric keys.
You can use【SHIFT】to make compund keys int o fun ction key, and press function key【A】
to change the input status. Then you press【SHIFT】back to mumeric keys.
Used as character keys:
Press【SHIFT】key to turn off NUMLOCK lamp.
Press function key【EDIT】to enter into “Edit” mode.
Press【A】to select “Uppercase” or “Lowcase” input option.
Press【SHIFT】key to turn on NUMLOCK lamp, the compound keys can be used as character
keys.
Page 17 Total 116
3.2 IR Controller
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
Index Name Description
1 POWER Turn of f device.
2 DEV Enable/Disable IR remote control
3 Numeric Keys Same as numeric keys of front panel.
4 EDIT Same as EDIT key of front panel.
5 A Same as A key of front panel.
6 REC Same as REC key of front panel.
7 PLAY Same as PLAY key of front panel.
8 INFO Same as INFO key of front panel.
9 VOIP Same as VOIP key of front panel.
10 MENU Same as MENU key of front panel.
11 PREV Same as PREV key of front panel.
12
Direction Keys
ENTER
Same as direction keys and enter key
of front panel.
13 PTZ Same PTZ key of front panel.
Page 18 Total 116
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
IRIS, FOCUS ZOOM for camera
14 ESC Same as ESC key of front panel.
15 Reserved
16 F1 Same as【F1】key of front panel.
17 Camera control
control.
18 F2 Same as【F2】key of front panel.
Loading the batteries into the IR controller
1. Remove the battery cover.
2. Insert the battery. Please take care that the poles (+ and -) are correctly positioned.
3. Replace the battery cover.
Start to use IR controller
Press【DEV】key, input the DVR device ID (default is “88”, can be changed in “Display”
menu) and then press【ENTER】key. If the “STATUS” lamp of DVR front panel is turned into
green, it means you can use IR controller to operate this DVR.
Stop using IR controller
When IR controller status is on, press【DEV】key again, the “STATUS” lamp will be turned
off. The IR controller can no t control this DVR.
Switch the DVR off
When IR controller status is on, press【POWER】key for several seconds, the DVR will be
powered off.
When IR controller can not work normally
Check batteries poles.
Check the remaining charge in the batteries.
Check IR controller sensor is mask.
Please change another IR controller to try again. It the problem is still existed, please contact
administrator.
Page 19 Total 116
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
Adjust Brightness, Contrast, Hue
OSD Display mode, position and
ty, area
Resolution and recording
3.3 Menu Description
3.3.1 Menu Items
Menu Name Function Menu Name Function
Display
Recording
Alarms
PTZ
Preview
Unit name
Device ID
Require password
Screen saver
Video standard
Enable Scaler
Brightness
Menu transparency
VGA resolution
DST Setup
Date and Time
Overwrite/Stop recording
SATA1 DISK
Record Para
parameters setup
Record schedule
Enalbe EventPara
PreRecord time
PostRecord time
Alarm input type (Normal open/
Normal close)
Alarm response and PTZ linkage
Alarm output and schedule
PTZ parameters
Preset setup
Sequence setup
Cruise setup
Preview mode
Switch time
Enable/Disable audio preview
Display delay
Preview layout
Image
Network
Exceptions
RS232
User
Password
Camera name and position setup
and Saturation
OSD format setup
Mask area setup
View tampering area and response
setup
V ideo si gn al l oss
Motion detection sensitivi
and response setup
NIC Type,
IP, Mac & Port
Advanced setup,
DNS IP, Mask& Gateway
Multicast IP
Remote host IP & Port
NAS Setting
httpPort, PPPoE
E-mail Setup
Exceptions type
Exceptions response
RS232 parameters
RS232 work mode
Add or delete user
Password setup or modification
User rights setup
Page 20 Total 116
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
Restore parameters
Upgrade firmware
Transaction
Text input mode
ATM IP address
ATM type
Text information
Utilities
HDD management
Clear alarm output
Reboot
Power off
View log
System information
3.3.2 Menu Operation
How to enter into menu mode
Press【MENU】key to enter into DVR main menu.
Press【PLAY】short key to enter into playback menu.
Perss【REC】short key to enter into manual record menu.
Perss【PTZ】short key to enter into PTZ control interface.
Notes: You must input user name and password. The default user name is “admin” and
password is “12345”.
Main Menu Description
The main menu interface is following:
There is one small rectanglar frame named “Active Frame”. It can be moved from one icon to
another by using 【】or【】key. When the “Active Frame” is located on one icon, you can press
【ENTER】key to enter into the secondary menu. For example, move the “Active Frame” to
“Image” icon, press 【ENTER】to enter into the secondary menu as following:
Page 21 Total 116
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
Each menu contains different kinds of items. There is a small rectangular frame named
“Active Frame” which is pointing to the selected item. This “Active Frame” can be moved by
【】or【】keys. There are such kinds of menu items:
1. Check Box: Provide 2 options, “” means enable and “×” means disable. You can use
【ENTER】or【EDIT】key to switch over.
2. List Box: Provide more than 2 options. However, only one of them can be selected. You
can use【↑】and【↓】to select one option. For example, on the right side of “Select
Camera”, there is a list box for you to select one camera.
3. Edit Box: This is for you to input characters. Press【EDIT】key to enter into edit status,
you can input characters as following:
a) Press【A】key to select number, upper case, lower case or symbols;
b) Use【】and【】keys to move cursor;
c) Use【EDIT】key to delete the charcter in front of cursor;
d) Press【ENTER】or【ESC】to exit edit.
4. Button: Excute a special function or enter into next sub-menu. For example, press
“Policy” button to enter into sub-menu. Press【Confirm】to save parameters and return
to parent menu. Press【Cancel】button to cancel and return to parent menu. The button in
grey means it can be operated only after it is enabled.
How to exit menu
Press【PREV】key to exit menu and return to preview mode.
3.4 Character Input
In the menu interface, if you enter into edit status (for example, in the “camera name” edit
box), at the bottom of screen, the input status is appeared:
Here it means you can press numeric keys to input digital number.
Page 22 Total 116
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
Press【A】key to change input methods. You can select “number”, “Uppercase”, “Lowercase”
or “Symbol”.
Uppercase
Lowercase
Symbol
There are 24 symbols in all. They are divided into 4 pages, and you can use【0】key to turn over
page.
If you want to input English character, for example, 【ABC】 key, in the uppercase or
lowercase mode, press the button one time, you can input “A” or “a”; press the button two times
continuously, you can input “B” or “b”; press the button three times con tinuously, you can input
“C” or “c”. It is the same usage for other characters.
Please note: for DS-8000AHLI-S & DS-8000AHFLI-S, you can press【SHIFT】button to
switch between function keys and numeric keys.
Page 23 Total 116
Loading...