HIKVISION DS-2CD7153-E Installation Manual

Network Mini Dome Camera

Installation Manual

V3.0.0

Hangzhou Hikvision Digital Technology Co., Ltd.

http://www.hikvision.com

Thank you for purchasing our product. If there are any questions, or requests, please
do not hesitate to contact the dealer.
This manual applies to DS-2CD7153-E and DS-2CD7133-E Network Camera.
This manual may contain several technical incorrect places or printing errors, and the
content is subject to change without notice. The updates will be added to the new
version of this manual. We will readily improve or update the products or procedures
described in the manual.

DISCLAIMER STATEMENT

“Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability of
the security or signaling aspects of this product. UL has only tested for fire, shock or
casualty hazards as outlined in UL’s Standard(s) for Safety, UL60950-1. UL
Certification does not cover the performance or reliability of the security or signaling
aspects of this product. UL MAKES NO REPRESENTATIONS, WARRANTIES OR
CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF

ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.”

Installation Manual of Network Mini Dome Camera

Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

1

Safety Instruction

These instructions are intended to ensure that the user can use the product correctly to avoid
danger or property loss.

The precaution measure is divided into ‘Warnings’ and ‘Cautions’:

Warnings: Serious injury or death may be caused if any of these warnings are neglected.

Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.

Warnings Follow these safeguards to

prevent serious injury or death.

Cautions Follow these precautions to

prevent potential injury or material
damage.

Warnings:

1. In the use of the product, you must strictly comply with the electrical safety regulations of the

nation and region.

2. Source with DC 12V according to the IEC60950-1 standard. Please refer to technical

specifications for more details.

3. Do not connect several devices to one power adapter as an adapter overload may cause

over-heating and can be a fire hazard.If use the POE as the power supply, please make sure that

the POE Switch have the sufficient power.

4. Please make sure that the plug is firmly inserted into the power socket.

5. When the product is installed on a wall or ceiling, the device should be firmly fixed.

6. If smoke, odor, or noise rise from the device, turn off the power at once and unplug the power

cable, then contact the service center.

7. If the product does not work properly, please contact your dealer or the nearest service center.

Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for

problems caused by unauthorized repair or maintenance.)

Installation Manual of Network Mini Dome Camera

Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

2

Notice:

1. Make sure the power supply voltage is correct before using the camera.

2. Do not drop the camera or subject it to physical shock.

3. Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a bit

of ethanol and wipe it gently. If the camera will not be used for an extended period of time, put

on the lens cap to protect the sensor from dirt.

4. Do not aim the camera at the sun or extra bright places. A blooming or smear may occur

otherwise (which is not a malfunction however), and affecting the endurance of sensor at the

same time.

5. The sensor may be burned out by a laser beam, so when any laser equipment is being used,

make sure that the surface of the sensor will not be exposed to the laser beam.

6. Do not place the camera in extremely hot or cold temperatures (the operating temperature

should be between -10°C ~ 60°C , dusty or damp locations, and do not expose it to high

electromagnetic radiation.

7. To avoid heat accumulation, good ventilation is required for a proper operating environment.

8. While shipping, the camera should be packed in its original packing, or packing of the same

texture.

9. Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment should be

replaced regularly according to their average life time. The average time varies because of

differences between operating environment and usage history, so regular checking is

recommended for all users. Please contact with your dealer for more details.

Installation Manual of Network Mini Dome Camera

Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

3

Table of Contents

Chapter 1 Introduction ................................................................................................. 1

1.1 Network camera Functions and Features ......................................................... 1

1.2 Applications...................................................................................................... 1

Chapter 2 Installation ................................................................................................... 2

2.1 Camera Description .......................................................................................... 2

2.1.1 Camera Physical Description .................................................................... 3

2.1.2 Camera Connection ................................................................................. 4

2.2 Hardware Installation ....................................................................................... 5

Appendix Product Specification ................................................................................... 8

DS-2CD7133-E ........................................................................................................ 8

Specification ................................................................................................... 10

Dimensions .................................................................................................... 11

DS-2CD7153-E ........................................................................................................ 8

Specification ..................................................................................................... 8

Dimensions ...................................................................................................... 9

Installation Manual of Network Mini Dome Camera

Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

1

Chapter 1 Introduction

Network camera is a kind of embedded digital surveillance product that combines the features
of both traditional analog camera and network DVS (Digital Video Server). Due to the embedded
Linux operation system and the latest Davinci hardware platform of TI, the system operates with
high scheduling efficiency. Furthermore, the firmware is burned in the flash, which makes the
product small, reliable and highly stable.

1.1 Network camera Functions and Features

Functions:

 Network Function: Support the TCP/IP protocols and IE browsing.
 Heartbeat Function: The server can acquire real time operating performance of the network

camera through the heartbeat function.

 Alarm Function: Supports Motion Detection.
 User Management: Support multilevel right management. The administrator can create up to

15 separate users with different right levels, which highly improves the system security.

Compression Functions:

 Support 1 channel video signal and standard H.264 video encoding compression, which

supports both variable bit rate and variable frame rate; besides, you can self-define both the
video quality and its compressed bit rate.

Remote Control:

 The product offers a 10M/100M self-adaptive Ethernet interface.
 Support TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, PPPoE, SMTP, NTP protocols.
 Set the parameters, browse real time videos or check the camera performance through

software or IE, and store the compressed bit rate through network.

 Support remote upgrades and maintenance.

1.2 Applications

This camera is ideal for remote control network applications. E.g.:

1. Network surveillance for supermarkets and factories.

2. Remote surveillance for homes and offices.

3. Indoor monitoring scenes, such as hotel, corridor, stairway.

Installation Manual of Network Mini Dome Camera

Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

2

Chapter 2 Installation

NOTE:

1. Please check if all the items on the package list have been included with your camera.

2. Read the following contents carefully before the installation.

3. Make sure that all the related equipment is power-off during the installation.

4. Check the power supply to prevent any damage caused by mismatching problems.

5. If the product does not operate properly, please contact your dealer or the nearest service

center. Never attempt to disassemble the camera yourself. Users are responsible for any
problem caused by modification or repairing without authorization.

2.1 Camera Description

NOTE: The camera supports PoE power supply.

Installation Manual of Network Mini Dome Camera

Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

3

2.1.1 Camera Physical Description

Serial NO.

Description

1

Back box

2

Lens

3

P: Power LED indicator, which turns red when power is applied to the unit.

4

Bottom board

5

Bottom board set screw hole

6

Lens set screw

7

S & L: Network status LED indicator.

When the network is connected, the “S” LED turns orange, while the “L” LED flickers in green.

8

RESET: Reset all paramaters to factory default settings.

NOTE:

When the camera is power up, press the “RESET” button for about 10 seconds, then all parameters,

including user name, password, IP address, port number, etc., will be reset to the factory default settings.

Installation Manual of Network Mini Dome Camera

Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

4

2.1.2 Camera Connection

Step1:
Connect one end of the network
cable to the camera and the other
end to PC.
Step2:
Connect one end of the power cord
to the camera and the other end to
power sokcket to supply power for
the camera.
Step3:
Access the camera over IE or client
software to view live video images.

Installation Manual of Network Mini Dome Camera

Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

5

2.2 Hardware Installation

The ceiling mount is a suitable installation method for this camera. Please stick to the following
steps:

1. Loosen the set screws with a hexagonal screw driver (attached with the camera), and take down

the back box shown as below:

Fig. 2.2.1 Remove the back box

2. Use the screws to fix the bottom board on the ceiling.

Fig. 2.2.2 Fix the bottom board

3. While viewing the video on the computer, adjust the camera’s view angle for your need.

NOTE:
If required, user can apply the pliers to
remove the clip (refer to the part marked
in dotted line) on the side of the back
box and then feed cables through the

opening to secure on the ceiling.

Installation Manual of Network Mini Dome Camera

Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

6

Loosen the lens set screws Insert the hexagonal screw driver into the hole

marked in the picture , and then adjust
horizontally and vertically the camera’s pan and
tilt by turning the hexagonal screw driver

Tighten the lens set screws

4. Install the back box, and tighten the set screws.

NOTE：

 As the lens of camera has

already been factory adjusted
to the best imaging effect,
thus it only needs to adjust
the pan and tilt view angle.

 If the image is not clear

without the back box, please
don’t worry, the back box will
affect the imaging effect, so
when you test the imaging
effect of lens, the back box
must be installed to the
camera

Installation Manual of Network Mini Dome Camera

Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

7

Fig.2.2.3 Install the back box

Fig.2.2.4 Done

Installation Manual of Network Mini Dome Camera

Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

8

Appendix Product Specification

DS-2CD7153-E

Specification

Model

Parameter

DS-2CD7153-E

2 Megapixel 1/3” CMOS Day&Night Weather-proof Vandal-Proof Network

Mini Dome Camera

Camera

Image Sensor

1/3” Progressive Scan CMOS

Min. Illumination

0.5Lux @(F1.2, AGC ON), 0.1Lux @(F1.2, AGC ON, Sense-up×5)

1.1Lux @(F1.8, AGC ON), 0.2Lux @(F1.8, AGC ON, Sense-up×5)

Electronic

Shutter

1/25s ~1/100,000s

Lens

4mm@F1.8 (2.8mm, 6mm, 8mm optional)

Angle of view: 55°(4mm)

Lens Mount

M12

Adjustment

Range

Pan±15°, Tilt0 ~90°, Rotation±15°

Day&Night

Electronic

Compression Standard

Video

Compression

H.264/MJpeg

Bit rate

32 Kbps~16Mbps

Audio

Compression

G.711(G.722.1 optional)

Image

Max. Image

Resolution

1600 x 1200

Frame Rate

50HZ:12.5fps (1600 x 1200), 12.5fps (1600 x 912), 25fps (1280×960), 25fps

(1280 x 720)

60HZ:15fps (1600 x 1200), 15fps (1600 x912), 25fps (1280×960), 30fps (1280

x 720)

Image Settings

Saturation, Brightness, Contrast adjustable through client software or web

browser

Network

Storage

Support NAS ( ISCSI optional)

Installation Manual of Network Mini Dome Camera

Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

9

Intelligent Alarm

Motion Detection

Protocols

TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, PPPoE, SMTP, NTP

(SNMP, HTTPS, FTP, SIP, SRTP, 802.1x, IPv6 optional )

Basic

e-PTZ, Initial Set button, Anti-flicker, Dual Stream, Heartbeat, Password

Protection, Watermark

Interface

Communication

Interface

1 RJ45 10M / 100M self-adaptive Ethernet interface

General

Operating

Condition

-10°C~60°C(14°F~140°F), Humidity 90% or less(non-condensing)

Power Supply

DC12V±10% / PoE

Power

Consumption

4W MAX

Impact

Protection

IEC60068-2-75Eh,50J;EN50102, IK10

Weather Proof

IP66

Dimensions(mm)

99.9×97.5×46.5(3.94”X3.84”X1.83”)

Weight

250g(0.55lbs)

Dimensions

Unit: mm

Installation Manual of Network Mini Dome Camera

Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

10

DS-2CD7133-E

Specification

Model

Parameter

DS-2CD7133-E

VGA 1/4” CMOS Day&Night Weather-proof Vandal-proof Network Mini

Dome Camera

Camera

Image Sensor

1/4” Progressive Scan CMOS

Min. Illumination

0.4 Lux @(F1.2, AGC ON)

0.9Lux @(F1.8, AGC ON)

Electronic Shutter

1/25s ~1/100,000s

Lens

4mm@F1.8 (2.8mm, 6mm, 8mm optional)

Angle of view: 71°(4mm)

Lens Mount

M12

Adjustment

Range

Pan±15°, Tilt0 ~90°, Rotation±15°

Day&Night

Electronic

Compression Standard

Video

Compression

H.264/MJpeg

Bit rate

32 Kbps~8Mbps

Audio

Compression

G.711(G.722.1 optional)

Image

Max. Image

Resolution

640×480

Frame Rate

50HZ: 25fps (640×480)

60HZ: 30fps (640×480)

Image Settings

Saturation, Brightness, Contrast adjustable through client software or web

browser

Network

Storage

Support NAS ( ISCSI optional)

Intelligent Alarm

Motion Detection

Protocols

TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, PPPoE, SMTP, NTP

(SNMP, HTTPS, FTP, SIP, SRTP, 802.1x, IPv6 optional )

Basic

Initial Set Button, Anti-flicker, Dual Stream, Heartbeat, Password Protection,

Watermark

Interface

Communication

1RJ45 10M / 100M self-adaptive Ethernet interface

Installation Manual of Network Mini Dome Camera

Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

11

Interface

General

Operating

Condition

-10°C~60°C(14°F~140°F), Humidity 90% or less(non-condensing)

Power Supply

DC12V±10% / PoE

Power

Consumption

4W MAX

Impact Protection

IEC60068-2-75Eh,50J;EN50102, IK10

Weather Proof

IP66

Dimensions(mm)

100×97.5×46.5(3.94”X3.84”X1.83”)

Weight

250g(0.55lbs)

Dimensions

Unit: mm

Installation Manual of Network Mini Dome Camera

Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

12

First Choice for Security Professionals