Hikvision DS-2CD7133-E-8MM, DS-2CD7133-E User Manual

Network Mini Dome Camera

Installation Manual

Hangzhou Hikvision Digital Technology Co., Ltd.

V3.0.0

http://www.hikvision.com

2010-04

Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. This manual applies to DS-2CD7133-E and DS-2CD7153-E Network Camera. This manual may contain several technical incorrect places or printing errors, and the content is subject to change without notice. The updates will be added to the new version of this manual. We will readily improve or update the products or procedures described in the manual.

DISCLAIMER STATEMENT

“Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested for fire, shock or casualty hazards as outlined in UL’s Standard(s) for Safety, UL60950-1. UL Certification does not cover the performance or reliability of the security or signaling aspects of this product. UL MAKES NO REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.”

Installation Manual of Network Mini Dome Camera

Safety Instruction

These instructions are intended to ensure that the user can use the product correctly to avoid

danger or property loss.

The precaution measure is divided into ‘Warnings’ and ‘Cautions’:

Warnings: Serious injury or death may be caused if any of these warnings are neglected.

Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.

Warnings Follow these safeguards to

prevent serious injury or death.

Cautions Follow these precautions to

prevent potential injury or material

damage.

Warnings:

1. In the use of the product, you must strictly comply with the electrical safety regulations

of the nation and region.

2. Source with DC 12V according to the IEC60950-1 standard. Please refer to technical

specifications for more details.

3. Do not connect several devices to one power adapter as an adapter overload may cause

over-heating and can be a fire hazard.If use the POE as the power supply, please make

sure that the POE Switch have the sufficient power.

4. Please make sure that the plug is firmly inserted into the power socket.

5. When the product is installed on a wall or ceiling, the device should be firmly fixed.

Installation Manual of Network Mini Dome Camera

6. If smoke, odor, or noise rise from the device, turn off the power at once and unplug the

power cable, then contact the service center.

7. If the product does not work properly, please contact your dealer or the nearest service

center. Never attempt to disassemble the camera yourself. (We shall not assume any

responsibility for problems caused by unauthorized repair or maintenance.)

Installation Manual of Network Mini Dome Camera

Notice:

1. Make sure the power supply voltage is correct before using the camera.

2. Do not drop the camera or subject it to physical shock.

3. Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with

a bit of ethanol and wipe it gently. If the camera will not be used for an extended period

of time, put on the lens cap to protect the sensor from dirt.

4. Do not aim the camera at the sun or extra bright places. A blooming or smear may occur

otherwise (which is not a malfunction however), and affecting the endurance of sensor at

the same time.

5. The sensor may be burned out by a laser beam, so when any laser equipment is being

used, make sure that the surface of the sensor will not be exposed to the laser beam.

6. Do not place the camera in extremely hot or cold temperatures (the operating

temperature should be between -10°C ~ 60°C, dusty or damp locations, and do not

expose it to high electromagnetic radiation.

7. To avoid heat accumulation, good ventilation is required for a proper operating

environment.

8. While shipping, the camera should be packed in its original packing, or packing of the

same texture.

9. Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment

should be replaced regularly according to their average life time. The average time varies

because of differences between operating environment and usage history, so regular

Installation Manual of Network Mini Dome Camera

checking is recommended for all users. Please contact with your dealer for more details.

Installation Manual of Network Mini Dome Camera

Table of Contents

Chapter 1 Introduction..............................................................................................................1

1.1 Network camera Functions and Features .............................................................1

1.2 Applications .....................................................................................................................2

Chapter 2 Installation.................................................................................................................3

2.1 Camera Description ......................................................................................................3

2.1.1 Camera Physical Description...........................................................................4

2.1.2 Camera Connection............................................................................................5

2.2 Hardware Installation ...................................................................................................6

Appendix Product Specification.......................................................................................... 10

DS-2CD7133-E .................................................................................................................... 10

Specification ................................................................................................................. 10

Dimensions.................................................................................................................... 11

DS-2CD7153-E .................................................................................................................... 12

Specification ................................................................................................................. 12

Dimensions.................................................................................................................... 13

+ 14 hidden pages