High-definition Vandal-proof Dome Camera· User Manual
High-definition Vandal-proof
Dome Camera
High-definition Vandal-proof Dome Camera· User Manual
600TVL 1/3”CCD Day/Night
vari-focal weather-proof
vandal-proof dome camera
600TVL 1/3”CCD IR vari-focal
weather-proof vandal-proof
dome camera
700TVL 1/3”CCD Day/Night
vari-focal weather-proof
vandal-proof dome camera
700TVL 1/3”CCD IR vari-focal
weather-proof vandal-proof
dome camera
Thank you for purchasing our product. If there are any questions,
or requests, please do not hesitate to contact the dealer.
This manual applies to the following modes:
This manual may contain several technical incorrect places or
printing errors, and the content is subject to change without notice.
The updates will be added to the new version of this manual. We
will readily improve or update the products or procedures
described in the manual.
DISCLAIMER STATEMENT
“Underwriters Laboratories Inc. (“UL”) has not tested the
performance or reliability o f the security or signaling aspects o f
this product. UL has only tested for fire, shock or casualty hazards
High-definition Vandal-proof Dome Camera· User Manual
as outlined in UL’s Standard(s) for Safety, UL60950-1. UL
Certification does not cover the performance or reliability of the
security or signaling aspects of this product. UL MAKES NO
REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS
WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY
OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS
PRODUCT.”
0100001021109
High-definition Vandal-proof Dome Camera· User Manual
Regulatory Information
FCC Information
FCC compliance: This equipment has been tested and found to
comply with the limits for a digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to co rrect the
interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied
accessories too are marked with "CE" a nd comply
therefore with the applicable harmo nized
European standards listed under the Low Voltage Directive
2006/95/EC, the EMC Directive 2004/108/EC.
High-definition Vandal-proof Dome Camera· User Manual
2002/96/EC (WEEE directive): Products marked
with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper
recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see:
www.recyclethis.info.
2006/66/EC (battery directive): This product
contains a battery that cannot be disposed of as
unsorted municipal waste in the European Union.
See the product documentation for specific battery
information. The battery is marked with this
symbol, which may include lettering to indicate cadmium (Cd),
lead (Pb), or mercury (Hg). For proper recycling, return the battery
to your supplier or to a designated collection point. For more
information see: www.recyclethis.info.
High-definition Vandal-proof Dome Camera· User Manual
Table of Contents
1 Introduction ........................................................................7
1.1 Product Features ...................................................... 7
1.2 Overview ................................................................. 8
2 Installation..........................................................................9
2.1 Ceiling Mounting ...................................................... 9
2.2 Ceiling Mounting with a gang box ........................... 13
2.3 Wall Mounting ........................................................ 17
2.4 Side Conduit Cabling .............................................. 20
2.5 Wiring .................................................................... 21
3 Menu Operations...............................................................23
3.1 Menu Description ................................................... 23
3.2 Lens Settings ......................................................... 24
3.3 Shutter/AGC Setting .............................................. 25
3.4 White Balance Setting ............................................ 28
3.5 Backlight Setting .................................................... 30
3.6 Picture Adjust Setting............................................. 31
3.7 ATR Setting ............................................................ 32
3.8 Motion Detection Setting ........................................ 33
3.9 Privacy Mask Setting .............................................. 35
3.10 Day/Night Setting ................................................ 36
3.11 NR Setting ........................................................... 39
3.12 Camera ID Setting ............................................... 40
3.13 SYNC Setting ....................................................... 41
3.14 Language Setting ................................................. 42
3.15 Camera Reset Setting ........................................... 42
3.16 Defective Pixel Correct Settings ............................ 42
3.17 Save All/Exit ........................................................ 43
High-definition Vandal-proof Dome Camera· User Manual
Glossary ................................................................................44
Troubleshooting ...................................................................48
Technical Maintenance ........................................................50
High-definition Vandal-proof Dome Camera· User Manual
1 Introduction
1.1 Product Features
This series of camera adopts high-sensitive sensor and advanced
circuit board design technology. It possesses of high resolution,
low distortion, and low noise features, etc. It is extremely suitable
for surveillance system and image process system.
The main features are as follows:
Adopt high-performance SONY CCD, up to 700TVL
resolution, providing high definition and clear image
OSD menu, which enables user to configure the detailed
parameters
Support Digital Wide Dynamic Range (D-WDR) for
backlighting surveillance
Auto-white balance with high color rendition
High Signal Noise Ratio (SNR), which brings clear and
high-quality image
Auto electronic shutter control to adapt to the different
surveillance environments
Auto gain control, adaptive brightness
Auto-iris
Support up to 8 configurable privacy masks to ensure your
privacy
High-definition Vandal-proof Dome Camera· User Manual
Advanced 3-axis design allows this dome camera to be
adjusted 0-355° horizontally and 0-75° vertically to meet
different mounting requirements
1.2 Overview
Figure 1-1 Overview
High-definition Vandal-proof Dome Camera· User Manual
2 Installation
Before you start:
Please make sure that the device in the package is in goo d
condition and all the assembly parts are included.
This series of camera support ceiling mounting, ceiling mounting
with a gang box, wall mounting and side conduit mounting.
2.1 Ceiling Mounting
Note:
Please make sure that the ce iling is strong enough to withstand
three times the weight of the camera.
Steps:
1. Attach the drill template (supplied) to the place where yo u
want to fix the camera.
2. Drill 3 screw holes and one cable hole (if you want to route the
cable through the mounting base) according to the drill
template.
High-definition Vandal-proof Dome Camera· User Manual
Cable Outlet
Screw Hole
Screw Hole
Screw Hole
Drilling Template for Outdoor
Day/Night Vandal-proof Dome Camera
Side Cable Outlet
Figure 2-1 The Drill Template
3. Loosen the screws with the supp lied L-shape screwdriver to
open the lower dome.
4. Remove the black liner.
Figure 2-2 Remove the Black Liner
High-definition Vandal-proof Dome Camera· User Manual
Note:
If you want to install the camera to the cement ceiling, you need to
screw 3 expansion screws into the 3 drilled holes first.
5. Route the cables and connect the power supply and output the
video on a monitor.
6. Secure the dome camera to the ceiling with 3 self-tapping
screws. Refer to Figure 2-3.
Figure 2-3 Secure the Camera to the Ceiling
7. Adjust the Lens.
1). View the camera image via the monitor.
2). Loosen the lock screw besides the lens
3). Rotate the panning table to adjust the panning position of
the camera. 0 to 355° is adjustable.
High-definition Vandal-proof Dome Camera· User Manual
4). Rotate the tilting table to adjust the t ilting position of the
camera. 0 to 75° is adjustable.
5). Rotate the lens to adjust the azimuth angle of the image. 0
to 355° is adjustable.
6). Tighten the lock screw.
7). Move the focus lever and zo om lever to adjust the focus
and the zoom.
Figure 2-4 Lens Adjustment
8. Attach the black liner back to the camera.
9. Attach the lower dome back to the camera and secure it with
the screws.
High-definition Vandal-proof Dome Camera· User Manual
Figure 2-5 Install the Black Liner and the Lower Dome
10. Remove the protection film softly to complete the installation.
Note:
Remove the protection film after the installation is completed in
case of the image problem caused by the scrape of the lower
dome.
2.2 Ceiling Mounting with a gang box
Steps:
1. Secure the adapter ring to the gang box.
High-definition Vandal-proof Dome Camera· User Manual
Figure 2-6 Secure the Adapter Ring
2. Loosen the screws to open the lower dome.
3. Remove the black liner.
Figure 2-7 Remove the Black Liner
4. Route the cables and connect the power supply and output the
video on a monitor
5. Secure the camera to the adapter ring with the screws.
High-definition Vandal-proof Dome Camera· User Manual
Figure 2-8 Install the Camera
6. Adjust the lens.
1). View the camera image via the monitor.
2). Loosen the lock screw besides the lens
3). Rotate the panning table to adjust the panning position of
the camera. 0 to 355° is adjustable.
4). Rotate the tilting table to adjust the t ilting position of the
camera. 0 to 75° is adjustable.
5). Rotate the lens to adjust the azimuth angle of the image. 0
to 355° is adjustable.
6). Tighten the lock screw.
7). Move the focus lever and zo om lever to adjust the focus
and the zoom.
7. Attach the black liner back to the camera.