HIKVISION DS-2CC5195P-VPIR, DS-2CC5181PN-VPIRH, DS-2CC5195PN-VPIR, DS-2CC5195PN-VPIRH, DS-2CC5195P-VPIRH User Manual
...
High-definition Vandal-proof
Dome Camera
User Manual
UD.6L0201D0109A01
High-definition Vandal-proof Dome Camera· User Manual
1
1
Model
Model
DS-2CC 5181P(N)-VPIR(H)
DS-2CC 5191P(N)-VPIR(H)
DS-2CC 5195P(N)-VPIR(H)
DS-2CC 5197P(N)-VPIR(H)
DS-2CC 51A1P(N)-VPIR(H)
DS-2CC 51A5P(N)-VPIR(H)
DS-2CC 51A7P(N)-VPIR(H)
Thank you for purchasing our product. If there are any questions,
or requests, please do not hesitate to co ntact the dealer.
This manual applies to
This manual may contain several technical incorrect places or
printing errors, and the content is subject to change without notice.
The updates will be added to the new version of this manual. We
will readily improve or update the products or procedures
described in the manual.
DISCLAIMER STATEMENT
“Underwriters Laboratories Inc. (“UL”) has not tested the
performance or reliability of the security or signaling aspects of
this product. UL has only tested for fire, shock or casualty hazards
as outlined in UL’s Standard(s) for Safety, UL609 50-1. UL
Certification does not cover the performance or reliability o f the
security or signaling as pects of this product. UL MAKES NO
REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS
WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY
OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS
PRODUCT.”
High-definition Vandal-proof Dome Camera· User Manual
2
2
Regulatory Information
FCC Information
FCC compliance: This equipment has been tested and found to
comply with the limits for a digital device, purs uant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates,
uses, and can radiate rad io frequency energy and, if not installed
and used in accordance with the instruction manual, may cause
harmful interference to radio co mmunications. Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the
interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation
EU Conformity Statement
This product and - if applicable - the supplied
accessories too are marked with "CE" and comply
therefore with the applicable harmonized
European standards listed under the Low Voltage Direct ive
2006/95/EC, the EMC Directive 2004/108/EC.
0100001021227
High-definition Vandal-proof Dome Camera· User Manual
3
3
2002/96/EC (WEEE directive): Products marked
with this symbol cannot be disposed of as unsorted
municipal waste in the European Un ion. For proper
recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see:
www.recyclethis.info.
2006/66/EC (battery directive): This product
contains a battery that cannot be disposed of as
unsorted municipal waste in the European Union.
See the product documentation for specific battery
information. The battery is marked with this
symbol, which may include lettering to indicate cadmium (Cd),
lead (Pb), or mercury (Hg). For pro per recycling, return the battery
to your supplier or to a designated collection point. For more
information see: www.recyclethis.info.
High-definition Vandal-proof Dome Camera· User Manual
4
4
Table of Contents
1 Introduction ........................................................................6
1.1 Product Features ...................................................... 6
1.2 Overview ................................................................. 8
2 Installation........................................................................10
2.1 Ceiling Mounting .................................................... 10
2.2 In-ceiling Mounting ................................................ 14
2.3 In-ceiling Mounting with gang box .......................... 17
2.4 Indoor Wall Mounting ............................................. 19
2.5 Image and Focus Adjusting .................................... 22
2.6 Wiring .................................................................... 24
3 Menu Description ..............................................................25
3.1 Menu Description (A).............................................. 25
3.1.1 Menu Overview ............................................. 25
3.1.2 Lens Settings ................................................ 26
3.1.3 Shutter/AGC Setting ..................................... 28
3.1.4 White Balance Setting ................................... 30
3.1.5 Backlight Compesation Setting ...................... 33
3.1.6 Picture Adjust Setting.................................... 33
3.1.7 ATR Setting ................................................... 34
3.1.8 Motion Detection Setting ............................... 35
3.1.9 Privacy Mask Setting ..................................... 37
3.1.10 Day/Night Setting ....................................... 38
3.1.11 NR Setting .................................................. 41
3.1.12 Camera ID Setting ...................................... 41
3.1.13 SYNC Setting .............................................. 43
3.1.14 Language Setting ........................................ 44
3.1.15 Camera Reset Setting .................................. 44
High-definition Vandal-proof Dome Camera· User Manual
5
5
3.1.16 Defective Pixel Correct Settings ................... 44
3.1.17 Save All/Exit ............................................... 45
3.2 Menu Description (B).............................................. 46
3.2.1 Scene ........................................................... 47
3.2.2 Exposure....................................................... 47
3.2.3 Funtion ......................................................... 55
3.2.4 System ......................................................... 63
3.2.5 Language ...................................................... 65
3.2.6 Exit ............................................................... 66
High-definition Vandal-proof Dome Camera· User Manual
6
6
1 Introduction
1.1 Product Features
This series of camera adopts high performance sensor and
advanced circuit board design technology. It features high
resolution, low distortion, and low noise, etc. It is suitable for the
surveillance system and image process system.
The main features of DS-2CC 5181P (N)-VPIR (H) , DS-2CC5191P
(N)-VPIR (H), and DS-2CC5 1A1P (N)-VPIR (H) are as fo llows:
High performance SONY CCD and high resolution bring
high-quality image
Low illumination, 0.001 Lux @ (F1.2, AGC ON), 0 Lux with IR
Support ICR filter auto switch
OSD menu, parameters are configurable.
Support auto white balance with high color rendition
High Signal Noise Ratio (SNR), which brings clear and
high-quality image
SMART IR
Auto iris
Up to 8 configurable privacy masks to ensure your privacy
Advanced 3-axis design meets different installation
requirements
High-definition Vandal-proof Dome Camera· User Manual
7
7
Impact Protection: IEC60068-2-75 test, Eh, 50J; EN50102, up
to IK10
Ingress protection: IP66
The main features of DS-2CC 5195P (N)-VPIR (H), DS-2CC5197P
(N)-VPIR (H), DS-2C C51A5P (N)-VPIR (H), and DS-2CC51A7P
(N)-VPIR (H) are as follows:
High performance SONY CCD and high resolution bring
high-quality image
Low illumination, 0.001 Lux @ (F1.2, AGC ON), 0.0001 Lux @
(F1.2, AGC ON, sensitivity × 512), 0 Lux with IR
Support ICR filter auto switch
OSD menu, parameters are configurable
Wide Dynamic Range (supported by DS-2CC5197P (N)-VPIR(H)
and DS-2CC 51A7P(N)-VPIR(H)) fo r backlighting surveillance
Back Light Compensation (BLC) with programmable BLC area
Support auto white balance with high color rendition
High Signal Noise Ratio (SNR) brings clear and high-quality
image
SMART IR
Electronic image stabilization (EIS) function to get steady and
clear image
Eclipse
Auto iris
Privacy mask with 8 optional co lors and 12 configurable areas
High-definition Vandal-proof Dome Camera· User Manual
8
8
2
1
3
4
6
5
No.
Description
1
Black Liner
2
Lower Dome
3
Lens Adjustable Screw
Advanced 3-axis design meets different installation
requirements
Impact Protection: IEC60068-2-75 test, Eh, 50J; EN50102, up
to IK10
Ingress protection: IP66
1.2 Overview
Figure 1-1 Overview
Table 1-1 Description
High-definition Vandal-proof Dome Camera· User Manual
9
9
No.
Description
4
Tilting Screw
5
Power Cable
6
Video Cable
High-definition Vandal-proof Dome Camera· User Manual
10
10
2 Installation
Before you start:
Please make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off during the
installation.
Check the specification of the products for the installation
environment.
Check whether the power supply is matched with your AC outlet
to avoid damage.
If the product does not function properly, please contact your
dealer or the nearest service ce nter. Do not d isassemble the
camera for repair or maintenance by yourself.
Please make sure the wall is strong enough to withstand three
times the weight of the camera and the mounting.
2.1 Ceiling Mounting
Steps:
1. Attach the drill temp late (supplied) to the place where you
want to fix the camera.
2. Drill the screw hole and the cable hole in the ceiling according
to the drill template.
High-definition Vandal-proof Dome Camera· User Manual
11
11
Screws
Screws
Wall
Drill
Template
Figure 2-1 Drill Template
3. Loosen the three screws on the edge of the low er dome with
the supplied screwdriver.
4. Remove the low er dome and the black liner.
Figure 2-2 Remove the Lower Dome
High-definition Vandal-proof Dome Camera· User Manual
12
12
Set Screws
Back Box
5. Loosen the three set screws as shown in Figure 2-3 with the
supplied screwdriver.
6. Remove the camera from the back box.
Figure 2-3 Remove the Camera
7. Attach the back box to the ceiling by aligning the holes of the
back box with the holes on the drill template.
8. Secure the back box with the supplied screws.
High-definition Vandal-proof Dome Camera· User Manual
13
13
Cable Hole
Figure 2-4 Secure the Back box
9. Route the cables through the cable hole.
10. Align the camera with the back box.
11. Tighten the set screws to secure the camera with the back box.
12. Connect the video output connector to the monitor. Connect
the power connector to the power supply.
13. Adjust the image and focus. Please refer to the section 2.5 for
more details.
14. Fit the black liner back to the camera.
15. Tighten the screws to secure the lower dome with the back
box.
High-definition Vandal-proof Dome Camera· User Manual
14
14
Figure 2-5 Secure Lower Dome
2.2 In-ceiling Mounting
Steps:
1. Attach the drill template (supplied) to the place where you
want to fix the camera.
2. Drill the screws hole and the cable hole in the ceiling according
to the drill template.
High-definition Vandal-proof Dome Camera· User Manual
15
15
In-ceiling
Mount
Bolt
Toggle
Ceiling
Drill Template
Figure 2-6 The Drill Template
3. Fold the to ggle to get the toggle bolt go through the screw
holes of the in-ceiling mount.
4. Keep screwing the bolt till the toggle unfolds and props on the
ceiling.
Figure 2-7 The In-ceiling Mount
High-definition Vandal-proof Dome Camera· User Manual
16
16
5. Route the cables through the hole in the center of the in-ce iling
mount.
6. Align the camera with the in-ceiling mount.
7. Tighten the set screws to secure the camera with the in-ceiling
mount.
8. Connect the video output connector to the monitor. Connect
the power connector to the power supply.
9. Adjust the image and focus. Please refer to the section 2.5 for
more detailed information.
Figure 2-8 Secure the Camera
10. Fit the black liner back to the camera.
11. Align the lower dome with the in-ceiling mount.
12. Tighten the screws to secure the lower dome with the in-ceiling
mount.
High-definition Vandal-proof Dome Camera· User Manual
17
17
Ceiling
In-ceiling
Mount
Gang
Box
Figure 2-9 Secure the Lower Dome
2.3 In-ceiling Mounting with gang box
Steps:
1. Secure the In-ceiling mount (supplied) to the gang box with
two screws.
Figure 2-10 In-ceiling Mount
High-definition Vandal-proof Dome Camera· User Manual
18
18
Ceiling
Gang
Box
Camera
Ceiling
2. Route the cables through the hole in the center of the in-ce iling
mount.
3. Align the camera with the gang box.
4. Tighten the screws to secure the camera wit h the gang box.
5. Connect the video output connector to the monitor. Connect
the power connector to the power supply.
6. Adjust the image and focus. Please refer to the section 2.5 for
more details.
Figure 2-11 Secure the Camera
7. Fit the black liner back to the camera.
8. Align the lower dome with the in-ceiling mount.
9. Tighten the screws to secure the low er dom e with the in-ceiling
mount.
High-definition Vandal-proof Dome Camera· User Manual
19
19
Figure 2-12 Secure the Lower Dome
2.4 Indoor Wall Mounting
Steps:
1. Disassemble the lower dome, black liner and the camera as
you do in chapter 2.1.
2. Align the number 2 holes of the back box with the number 1
holes of the wall mount.
3. Secure the back box to the wall mount with four screws.
High-definition Vandal-proof Dome Camera· User Manual
20
20
Figure 2-13 Secure the Back Box
4. Route the cables through the hole in the center of the wall
mount.
5. Align the camera with the back box.
6. Tighten the set screws to secure the camera with the back box.
7. Connect the video output connector to the monitor. Connect
the power connector to the power supply.
8. Adjust the image and focus. Please refer to the section 2.5 for
more detailed information.
Loading...