Hikvision DS-2CC11A7N-A User Manual

Day Night Box Camera

User Manual

Day Night Box Camera·User Manual

Models

DS-2CC 1181P(N)(-A)

DS-2CC 1191P(N)(-A)

DS-2CC 11A1P(N)(-A)

DS-2CC 1112P(N)(-A)

DS-2CC 1172P(N)(-A)

DS-2CC 1182P(N)(-A)

DS-2CC 1192P(N)(-A)

DS-2CC 11A2P(N)

DS-2CC 1183P(N)-A(-C)

DS-2CC 1193P(N)-A(-C)

DS-2CC 11A3P(N)-A(-C)

DS-2CC 1185P(N)-A(-C)

DS-2CC 1195P(N)-A(-C)

DS-2CC 11A5P(N)-A(-C)

DS-2CC 1187P(N)-A(-C)

DS-2CC 1197P(N)-A(-C)

DS-2CC 11A7P(N)-A(-C)

DS-2CC 1188P(N)-A(-C)

DS-2CC 1198P(N)-A(-C)

DS-2CC 11A8P(N)-A(-C)

Thank you for purchasing our product. If there are any questions,

or requests, please do not hesitate to contact the dealer.

This manual applies to following cameras:

This manual may contain several technical incorrect places or

printing errors, and the content is subject to change without notice.

The updates will be added to the new version of this manual. We

will readily improve or update the products or procedures

described in the manual.

DISCLAIMER STATEMENT

“Underwriters Laboratories Inc. (“UL”) has not tested the

performance or reliability o f the security or sig naling aspects of

Day Night Box Camera·User Manual

this product. UL has only tested for fire, shock or casualty hazards

as outlined in UL’s Standard(s) for Safety, UL60950-1. UL

Certification does not cover the performance or reliability of the

security or signaling aspects of this product. UL MAKES NO

REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS

WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY

OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS

PRODUCT.”

Day Night Box Camera·User Manual

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and found to

comply with the limits for a digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a comm ercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause

harmful interference to radio com munications. Operation of this

equipment in a residential area is likely to cause harmful

interference in which case the user will be required to co rrect the

interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation

EU Conformity Statement

This product and - if applicable - the supplied

accessories too are marked with "CE" a nd comply

therefore with the applicable harmo nized

European standards listed under the Low Voltage Directive

2006/95/EC, the EMC Directive 2004/108/EC.

Day Night Box Camera·User Manual

2002/96/EC (WEEE directive): Products marked

with this symbol cannot be disposed of as unsorted

municipal waste in the European Union. For proper

recycling, return this product to your local supplier

upon the purchase of equivalent new equipment, or dispose of it at

designated collection points. For more information see:

www.recyclethis.info.

2006/66/EC (battery directive): This product

contains a battery that cannot be disposed of as

unsorted municipal waste in the European Union.

See the product documentation for specific battery

information. The battery is marked with this

symbol, which may include lettering to indicate cadmium (Cd),

lead (Pb), or mercury (Hg). For proper recycling, return the battery

to your supplier or to a des ignated collection point. For more

information see: www.recyclethis.info.

Day Night Box Camera·User Manual

Warnings Follow these

safeguards to prevent

serious injury or death.

Cautions Follow these

precautions to prevent

potential injury or material

damage.

Safety Instruction

These instructions are intended to ensure that user can use the

product correctly to avoid danger or property loss.

The precaution measure is divided into “Warnings” and “Cautions”

Warnings: Serious injury or death may occur if any of the

warnings are neglected.

Cautions: Injury or equipment damage may occur if any of the

cautions are neglected.

Warnings

 Please adopt the power adapter which can meet the safety

extra low voltage (SELV) request. And so urce with DC 12V or

AC 24V (depending on models) according to the IEC60950-1

and Limited Power Source standard.

 If the product does not work properly, please contact your

dealer or the nearest service center. Never attempt to

disassemble the camera yourself. (We shall not assume any

Day Night Box Camera·User Manual

responsibility for problems caused by unauthorized repair or

maintenance.)

 To reduce the risk of fire or electrical shock, do not expose this

product to rain or moisture.

 This installation should be made by a qualified service person

and should conform to all local codes.

 Please install blackouts equipment into the power supply

circuit for convenient supply interruption.

 Please make sure that the ceiling can support more than 50(N)

Newton gravities if the camera is fixed to the ceiling.

Cautions

 Make sure the power supply voltage is correct before using the

camera.

 Do not drop the camera or subject it to physical shock.  Do not touch sensor modules with fingers. If cleaning is

necessary, use a clean cloth with a bit of ethanol and wipe it

gently. If the camera will not be used for an extended period of

time, put on the lens cap to protect the sensor from dirt.

 Do not aim the camera at the sun or extra bright places. A

blooming or smear may occur otherwise (which is not a

malfunction however), and affecting the endurance of sensor

at the same time.

Day Night Box Camera·User Manual

 The sensor may be burned out by a laser beam, so when any

laser equipment is being used, make sure that the surface of

the sensor will not be exposed to the laser beam.

 Do not place the camera in extremely hot or cold temperatures

(the operating temperature should be between -10°C ~ 60°C ,

dusty or damp locations, and do not expose it to high

electromagnetic radiation.

 To avoid heat accumulation, good ventilation is required for a

proper operating environment.

 Do not let water and any liquid flow into the cam era.  While shipping, the camera should be packed in its original

packing, or packing of the same texture.

 Improper use or replacement of the battery may result in

hazard of explosion. Replace with the same or equivalent type

only. Dispose of used batteries according to the instructions

provided by the battery manufacturer.

Day Night Box Camera·User Manual

Table of Contents

1 Introduction ......................................................................10

1.1 Product Features .................................................... 10

1.2 Overview ............................................................... 13

1.2.1 Rear Panel (A)............................................... 16

1.2.2 Rear Panel (B)............................................... 17

1.2.3 Rear Panel (C)............................................... 18

1.2.4 Rear Panel (D) .............................................. 22

1.2.5 Rear Panel (E) ............................................... 26

1.2.6 Rear Panel (F) ............................................... 28

2 Installation........................................................................30

2.1 Wall Mounting ........................................................ 30

2.2 Wiring .................................................................... 37

3 Menu Operations...............................................................39

3.1 Menu Description (A).............................................. 39

3.1.1 Menu Overview ............................................. 39

3.1.2 Lens Settings ................................................ 40

3.1.3 Shutter/AGC Setting ..................................... 42

3.1.4 White Balance Setting ................................... 45

3.1.5 Backlight Setting ........................................... 48

3.1.6 Picture Adjust Setting.................................... 48

3.1.7 ATR Setting ................................................... 50

3.1.8 Motion Detection Setting ............................... 50

3.1.9 Privacy Mask Setting ..................................... 53

3.1.10 Day/Night Setting ....................................... 54

3.1.11 NR Setting .................................................. 56

3.1.12 Camera ID Setting ...................................... 57

3.1.13 SYNC Setting .............................................. 59

Day Night Box Camera·User Manual

3.1.14 Language Setting ........................................ 59

3.1.15 Camera Reset Setting .................................. 59

3.1.16 Defective Pixel Correct Setting..................... 60

3.1.17 RS-485 Setting ........................................... 60

3.1.18 Save All/Exit ............................................... 60

3.2 Menu Description (B).............................................. 61

3.2.1 Menu Overview ............................................. 61

3.2.2 Scene ........................................................... 62

3.2.3 Exposure....................................................... 62

3.2.4 Funtion ......................................................... 72

3.2.5 System ......................................................... 81

3.2.6 Language ...................................................... 85

3.2.7 Exit ............................................................... 85

Appendix...............................................................................87

1 Glossary ................................................................... 87

2 Troubleshooting......................................................... 91

3 Technical Maintenance ............................................... 94

Day Night Box Camera·User Manual

1 Introduction

1.1 Product Features

This camera adopts high performance senso r and advanced print

circuit board design technology. It possesses o f high resolution,

low distortion, and low noise features, etc. It is extremely suitable

for surveillance system and image process system.

The features of DS-2CC1 181/1191/11A1P(N)(-A) are as follows:  Adopt high performance SONY CCD, and supply high definition

and clear image

 Low illumination  Support day and night auto switch  Support OSD menu controlling, enable user to configure the

detailed parameters

 Support digital noise reduction to get clear and fine image  Support digital wide dynamic range function  Support eclipse  High Signal Noise Ratio (SNR) to ensure clear and p leased

image

 Support auto iris  Convenient back focus adjustment

Day Night Box Camera·User Manual

The features of DS-2CC1 112/1172/1182/1192P(N)(-A) and

DS-2CC 11A2P(N) are as follows:

 Adopt high performance SONY CCD, and supply high definition

and clear image

 Low illumination, 0.001Lux@F1.2（F1.2， AGC ON）  Support day and night auto switch  Support digital noise reduction to get clear and fine image  Support digital wide dynamic range function  High Signal Noise Ratio (SNR) to ensure clear and pleased

image

 Support auto iris  Convenient back focus adjustment

The features of

DS-2CC 1183/1193/11A3/1185/1195/11A5/1187/1197/11A7/118

8/1198/11A8P(N)-A(-C) are as follows:  Adopt high performance SONY CCD, and supply high definition

and clear image

 Low illumination, color 0.001Lux@F1.2, B/W 0.0001Lux@F1.2  Support day and night auto switch, IR cut filter auto switch  Support OSD menu controlling, enable user to configure the

detailed parameters

 Support 3D digital noise reduction to get clear and fine image  Support digital wide dynamic range function  Smart IR function

Day Night Box Camera·User Manual

 Support electronic image stabilization (EIS) to get steady and

clear image

 Support eclipse  Support BLC with programmable BLC area  Support auto white balance with high color rendition  Support auto electronic shutter control to adapt to different

environments

 Support auto gain control, adaptive brightness  High Signal Noise Ratio (SNR) to ensure clear and pleased

image

 Support auto iris  Convenient back focus adjustment  Super wide dynamic range. The range is larger than 75dB.  High light compensation

Notes:

 Only the DS-2CC1187/1197/11A7P(N)-A(-C) models

support the super wide dynamic range function.

 The DS-2CC1187/1197/11A7P(N)-A(-C) models don’t

support digital wide dynamic range function.

 Only the DS-2CC 1188/1198/11A8P(N)-A(-C) support the

high light compensation.

 The DS-2C C1188/1198/11A8P(N)-A(-C) models don’t

support smart IR function.

Day Night Box Camera·User Manual

1.2 Overview

The appearances of the cameras are as follows:

Figure 1-1 Overview

1-Lock Screws: available both on top and bottom for ceiling

mounting and wall mounting respectively.

2-Auto-Iris Drive Interface: It connects the lens to the auto

drive circuit in the camera which outputs direct current to drive

the iris.

Day Night Box Camera·User Manual

Figure 1-2 Side View

3-Lens: the optical lens adopted for the box camera (not provided.

Please purchase a compatible lens for the camera).

4-Back Focus Lever: It is set to optimum status by default. You

can also manually pull and adjust it for more accuracy focus.

Notes:

The back focus has been co nfigured to optimum value by default.

But it can be adjusted slightly to coordinate with different lens.

Adjust the back focus lever when the lens connector has been

confirmed but the lens is still not focalized.

The setting steps are as follows:

Steps:

1. Rotate the lens to the camera tightly.

Day Night Box Camera·User Manual

Video

Power

Damp-

Damp+

Video

Driver+

GND

Driver-

2. Loosen the set screw of back focus lever.

3. Adjust the stick left and right until lens gets clear image

4. Lock the set screw.

Figure 1-3 Pins of the Auto Iris Interface

The auto iris interface is composed of four square pins as shown in

Figure 1-3.

 Power, Video and GND pins are used in video driven mode.  Damp+, damp-, drive+ and drive- pins are used in DC driven

mode.

There are two driven modes of auto iris as follows:  Video Driven: The camera inputs the video signal level into

lens interior, and internal drive circuit of the lens outputs

control voltage for the electronic motor to adjust lens iris.

 Direct Current Driven: There is a drive circuit fo r electronic

motor of the iris in the camera. The drive circuit can directly

output DC control voltage to control electronic motor.

Day Night Box Camera·User Manual

1 2

4 3

No.

Items

Description

Joystick

Used to control OSD

PWR Indicator

The indicator is on,

when the power is up.

Note: DS-2CC 1181/1191/11A1P(N)(-A) models don’t support VD

driven mode.

1.2.1 Rear Panel (A)

The rear panel of DS-2C C1181/1191/11A1P（N） models is shown

as follows.

Figure 1-4 Rear Panel （12V）

Table 1-1 Rear Panel Description

Day Night Box Camera·User Manual

No.

Items

Description

Power Interface

12V DC

Video Output

Grounding Screw

1.2.2 Rear Panel (B)

The rear panel of D S-2CC1181/1191/11A1P（N）-A models is shown

as follows.

Figure 1-5 Rear Panel （12V and 24V）

Day Night Box Camera·User Manual

No.

Items

Description

Joystick

Used to control OSD

Alarm OUT, IN, GND

Interface

Support a larm in and

out.

D/N Interface

Used to switch day/night

mode externally

RS-485 Interface

Used for remote control

by DVR, keyboard, etc.

PWR Indicator

The indicator is on, when

the power is up.

Power Interface

Support both 12V DC and

24V AC.

Video Output

Grounding Screw

Table 1-2 Rear Panel Description

1.2.3 Rear Panel (C)

The rear panel of DS-2CC1112/1172/1182/1192/11A2 P(N)

models is shown as follows.

1 2

No.

Items

Description

Video Output

1Vp-p Composite

Output (75Ω/BNC)

Power Interface

12V DC

Grounding Screw

PWR Indicator

The indicator is on,

when the power is up.

Dial-switch

Used for adjust the

Day Night Box Camera·User Manual

Figure 1-6 Rear Panel

Table 1-3 Rear Panel Description

Day Night Box Camera·User Manual

No.

Items

Description

image parameters.

LEVEL knob

If the auto iris lens is

DD type, you can

adjust the s ize o f iris

with this knob to get a

better brightness

level.

If the auto iris lens is

VD type, this knob is

invalid.

DD and VD Switch

The camera supports

DD(DC Drive) and

VD(Video Drive) iris

driven modes.

If the auto iris lens is

DD type, you need to

turn the switch to DD

side.

If the auto iris lens is

VD type, you need to

turn the switch to VD

side.

Descriptions of the dial-switches are shown as follows:

Day Night Box Camera·User Manual

Name

Description

NAGC

Normal AGC: Normal auto gain control.

SAGC

Super AGC: Super auto gain control.

Flickerless: The image f lickers when the power is

different (such as the PAL and NTSC system). You

can turn this switch to ON to improve the image.

BLC

Back light compensation: The exposure value fo r

compensating back light will be adjusted

automatically when this feature is enabled.

Auto iris: Please turn switch to AI when auto iris

lens is used.

AES

Auto electronic shutter: P lease turn switch to AES

when auto iris lens is not used.

SHARP

Sharpness: Lines of objects will be straighter when

you turn switch to SHARP.

SOFT

Sharpness: Edges and corners will be softer when

you turn switch to SOFT.

DNR

Digital noise reduction: Enable this function to

reduce noise effectively.

D-WDR

Digital wide dynamic range: Enable this function to

enlarge wide dynamic range.

Reserved

Table 1-4 Dial-switch

Day Night Box Camera·User Manual

No.

Items

Description

Video Output

1Vp-p Composite

Output(75Ω/BNC)；

1.2.4 Rear Panel (D)

The rear panel of DS-2CC1112/1172/1182/1192P(N)-A models is

shown as follows.

Figure 1-7 Rear Panel

Table 1-5 Rear Panel Description

No.

Items

Description

Power Interface

Support both 12V DC

and 24V AC.

Grounding Screw

PWR Indicator

The indicator is on,

when the power is up.

Dial-switch

Used for adjust the

image parameters.

LEVEL knob

If the auto iris lens is

DD type, you can

adjust the s ize o f iris

with this knob to get a

better brightness

level.

If the auto iris lens is

VD type, this knob is

invalid.

V PHASE

Under power

synchronization

mode, you can adjust

the synchronization

phase with this knob.

Under Internal

synchronization

mode, this knob is

Day Night Box Camera·User Manual

No.

Items

Description

invalid.

DD and VD Switch

The camera supports

DD(DC Drive) and

VD(Video Drive) iris

driven modes.

If the auto iris lens is

DD type, you need to

turn the switch to DD

side.

If the auto iris lens is

VD type, you need to

turn the switch to VD

side.

Name

Description

NAGC

Normal AGC: Normal auto gain control.

SAGC

Super AGC: Super auto gain control.

Flickerless: The image f lickers when the power is

different (such as the PAL and NTSC system). You

can turn this switch to ON to improve the image.

Descriptions of the dial-switches are shown as follows:

Table 1-6 Dial-switch

Day Night Box Camera·User Manual

Name

Description

BLC

Back light compensation: The exposure value fo r

compensating back light will be adjusted

automatically when this feature is enabled.

Auto iris: Please turn switch to A I when auto iris

lens is used.

AES

Auto electronic shutter: P lease turn switch to AES

when auto iris lens is not used.

SHARP

Sharpness: Lines of objects will be straighter when

you turn switch to SHARP.

SOFT

Sharpness: Edges and corners will be softer when

you turn switch to SOFT.

DNR

Digital noise reduction: Enable this function to

reduce noise effectively.

D-WDR

Digital wide dynamic range: Enable this function to

enlarge wide dynamic range.

Power synchronization: Please t urn sw itch to LL

when power synchronization mode is needed.

INT

Internal synchronization: Please turn switch to INT

when internal synchronization mode is needed.

Day Night Box Camera·User Manual

No.

Items

Description

Alarm OUT, IN, GND

Interface

Support alarm in a nd

out.

1.2.5 Rear Panel (E)

The rear panel of

DS-2CC1183/1193/11A3/1185/1195/11A5/1187/1197/11A7/118

8/1198/11A8P(N)-A models is shown as follows.

Figure 1-8 Rear Panel

Table 1-7 Rear Panel Description

Day Night Box Camera·User Manual

No.

Items

Description

D/N Interface

Used to sw itch

day/night mode

externally

RS-485 Interface

Used for remo te

control by DVR,

keyboard, etc.

Video Output

Output up to 700 TVL

high-definition video.

Power Interface

Support both 12V DC

and 24V AC.

PWR Indicator

The indicator is on,

when the power is up.

Grounding Screw

8 Joystick

DD and VD Switch

Used for selecting the

iris mode to DD(DC

Drive) o r VD(Video

Drive).

Day Night Box Camera·User Manual

No.

Items

Description

Joystick

Alarm OUT, IN, GND

Support alarm in a nd

1.2.6 Rear Panel (F)

The rear panel of

DS-2CC1183/1193/11A3/1185/1195/11A5/1187/1197/11A7/118

8/1198/11A8P(N)-C models is shown as follows.

Figure 1-9 Rear Panel

Table 1-8 Rear Panel Description

Day Night Box Camera·User Manual

No.

Items

Description

Interface

out.

D/N Interface

Used to sw itch

day/night mode

externally

RS-485 Interface

Used for remo te

control by DVR,

keyboard, etc.

Video Output

Output up to 700 TVL

high-definition video.

PWR Indicator

The indicator is on,

when the power is up.

Grounding Screw

Power Interface

Support 110-240V

AC.

DD and VD Switch

Used for selecting the

iris mode to DD(DC

Drive) o r VD(Video

Drive).

+ 67 hidden pages