HIKVISION DS-2CC102PN-IR1, DS-2CC102P-IR3, DS-2CC102P-IR1, DS-2CC102PN-IR3, DS-2CC102PN-IR5 User Manual

...

Download

IR Bullet Camera· User Manual

IR Bullet Camera

User Manual

UD.6L0201D0063A01

IR Bullet Camera· User Manual

Thank you for purchasing our product. If there are any questions,

or requests, please do not hesitate to contact the dealer.

This manual applies to following cameras:

Models

DS-2CC102P(N)-IR1(IR3)

(IR5)

DS-2CC112P(N)-IR1(IR3)

(IR5)

DS-2CC192P(N)-IR1(IR3)

(IR5)

DS-2CC1182P(N)-IR1(IR3)

(IR5)

DS-2CC1192P(N)-IR1(IR3)

(IR5)

DS-2CC11A2P(N)-IR1(IR3)

(IR5)

DS-2CC1172P(N)-IR1T

(IR3T)(IR5T)

DS-2CC1182P(N)-IR1T

(IR3T)(IR5T)

DS-2CC102P(N)-IRA

DS-2CC112P(N)-IRA

DS-2CC192P(N)-IRA

DS-2CC1182P(N)-IRA

DS-2CC1192P(N)-IRA

DS-2CC11A2P(N)-IRA

DS-2CC102P(N)-IR

DS-2CC112P(N)-IR

DS-2CC192P(N)-IR

DS-2CC1132P(N)-IR

IR Bullet Camera· User Manual

This manual may contain several technical incorrect places or

printing errors, and the content is subject to change without notice .

The updates will be added to the new version of this manual. We

will readily improve or update the products or procedures

described in the manual.

DISCLAIMER STATEMENT

“Underwriters Laboratories Inc. (“UL”) has not tested the

performance or reliability of the security or signaling aspects of

this product. UL has only tested for fire, shock or casualty hazards

as outlined in UL’s Standard(s) for Safety, UL60950-1. UL

Certification does not cover the performance or reliability of the

security or signaling aspects of this product. UL MAKES NO

REPRESENTATIONS, WARRANTIES OR CERTIF ICATIONS

WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY

OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS

PRODUCT.”

0100001021012

IR Bullet Camera· User Manual

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and found to

comply with the limits for a digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the

interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two condit ions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation

EU Conformity Statement

This product and - if applicable - the supplied

accessories too are marked with "CE" and comply

therefore with the applicable harmonized

European standards listed under the Low Voltage Directive

2006/95/EC, the EMC Directive 2004/108/EC.

IR Bullet Camera· User Manual

2002/96/EC (WEEE directive): Products marked

with this symbol cannot be disposed of as unsorted

municipal waste in the European Union. For proper

recycling, return this product to your local supplier

upon the purchase of equivalent new equipment, or dispose of it at

designated collection points. For more information see:

www.recyclethis.info.

2006/66/EC (battery directive): This product

contains a battery that cannot be disposed of as

unsorted municipal waste in the European Union.

See the product documentation for specific battery

information. The battery is marked with this

symbol, which may include lettering to indicate cadmium (Cd),

lead (Pb), or mercury (Hg). For proper recycling, return the battery

to your supplier or to a designated collection point. For more

information see: www.recyclethis.info.

IR Bullet Camera· User Manual

Safety Warnings and Cautions

Please pay attention to the following warnings and cautions:

Hazardous Voltage may be present: Special

measures and precautions must be taken when

using this device. Some potentials (voltages) on the

device may present a hazard to the user. This device

should only be used by Employees from our company with

knowledge and training in working with these types of devices that

contain live circuits.

Power Supply Hazardous Voltage: AC mains voltages

are present w ithin the power supply assembly. This device must be

connected to a UL approved, completely enclosed power supply, of

the proper rated voltage and current. No user serviceable parts

inside the power supply.

System Grounding (Earthing): To avoid shock, ensure

that all AC wiring is not exposed and that the earth grounding is

IR Bullet Camera· User Manual

maintained. Ensure that any equipment to which this device will be

attached is also connected to properly wired grounded receptacles

and are approved medical devices.

Power Connect and Disconnect: The AC

power supply cord is the main disconnect device to

mains (AC power).The socket outlet shall be

installed near the equipment and shall be readily

accessible.

Installation and Maintenance: Do not connect/disconnect

any cables to or perform installation/maintenance on this device

during an electrical storm.

Power Cord Requirements: The connector

that plugs into the wall outlet must be a

grounding-type male plug designed for use in your

region. It must have certification marks showing certification by an

agency in your region. The connector that plugs into the AC

receptacle on the power supply must be an IEC 320, sheet C13,

female connector. See the following website for more information

http://kropla.com/electric2.htm.

Lithium Battery: This device contains a Lithium Battery. There

is a risk of explosion if the battery is replaced by an incorrect type.

IR Bullet Camera· User Manual

Dispose of used batteries according to the vendor’s instructions

and in accordance with local environmental regulations.

Perchlorate Material: Special handling may apply. See

www.dtsc.ca.gov/hazardouswaste/perchlorate. This notice is

required by California Code of Regulations, Title 22, Division 4.5,

Chapter 33: Best Management Practices for Perchlorate Materials.

This device includes a battery which contains perchlorate material.

Taiwan battery recycling:

Please recycle batteries.

Thermal and Mechanical Injury: Some

components such as heat sinks, power regulators,

and processors may be hot; care should be taken

to avoid contact with these components.

Electro Magnetic Interference: This equipment has not

been tested for compliance with emissions lim its of FCC and similar

international regulations. This device is not, and may not be,

offered for sale or lease, or sold, or leased until authorization from

the United States FCC or its equivalent in other countries has been

obtained. Use of this equipment in a residential location is

prohibited. This equipment generates, uses and can radiate radio

frequency energy which may result in harmful interference to radio

communications. If this equipment does cause harmful

interference to radio or television reception, which can be

IR Bullet Camera· User Manual

determined by turning the equipment on and off, the user is

required to take measures to eliminate the interference or

discontinue the use of this equipment.

Lead Content:

Please recycle this device in a responsible

manner. Refer to local environmental

regulations for proper recycling; do not dispose

of device in unsorted municipal waste.

IR Bullet Camera· User Manual

Safety Instruction

These instructions are intended to ensure that user can use the

product correctly to avoid danger or property loss.

The precaution measure is divided into “Warnings” and “Cautions”

Warnings: Serious injury or death may occur if any of the

warnings are neglected.

Cautions: Injury or equipment damage may occur if any of the

cautions are neglected.

Warnings

 Please adopt the power adapter which can meet the safety

extra low voltage (SELV) request. And source with DC 12V or

AC 24V (depending on models) according to the IEC60950-1

and Limited Power Source standard.

 If the product does not work properly, please contact your

dealer or the nearest service center. Never attempt to

Warnings Follow these

safeguards to prevent

serious injury or death.

Cautions Follow these

precautions to prevent

potential injury or material

damage.

IR Bullet Camera· User Manual

disassemble the camera yourself. (We shall not assume any

responsibility for problems caused by unauthorized repair or

maintenance.)

 To reduce the risk of fire or electrical shock, do not expose this

product to rain or moisture.

 This installation should be made by a qualified service person

and should conform to all local codes.

 Please install blackouts equipment into the power supply

circuit for convenient supply interruption.

 Please make sure that the ceiling can support more than 50(N)

Newton gravities if the camera is fixed to the ceiling.

Cautions

 Make sure the power supply voltage is correct before using the

camera.

 Do not drop the camera or subject it to physical shock.  Do not touch sensor modules with fingers. If cleaning is

necessary, use a clean cloth with a bit of ethanol and wipe it

gently. If the camera will not be used for an extended period of

time, put on the lens cap to protect the sensor from dirt.

 Do not aim the camera at the sun or extra bright places. A

blooming or smear may occur otherwise (which is not a

malfunction however), and affecting the endurance of sensor

at the same time.

IR Bullet Camera· User Manual

 The sensor may be burned out by a laser beam, so when any

laser equipment is being used, make sure that the surface of

the sensor will not be exposed to the laser beam.

 Do not place the camera in extremely hot or cold temperatures

(the operating temperature should be between -10°C ~ 60°C ,

dusty or damp locations, and do not expose it to high

electromagnetic radiation.

 To avoid heat accumulation, good ventilation is required for a

proper operating environment.

 Do not let water and any liquid flow into the camera.  While shipping, the camera should be packed in its original

packing, or packing of the same texture.

 Improper use or replacement of the battery may result in

hazard of explosion. Replace with the same or equivalent type

only. Dispose of used batteries according to the instructions

provided by the battery manufacturer.

IR Bullet Camera· User Manual

Table of Contents

1 Introduction ......................................................................13

1.1 Product Features .................................................... 13

1.2 Overview ............................................................... 14

2 Installation........................................................................17

2.1 Installation of Camera A ......................................... 17

2.2 Installation of Camera B ......................................... 20

2.3 Installation of Camera C ......................................... 22

2.4 Wiring .................................................................... 24

Appendix...............................................................................27

1 Glossary ................................................................... 27

2 Troubleshooting......................................................... 31

3 Technical Maintenance ............................................... 33

IR Bullet Camera· User Manual

1 Introduction

1.1 Product Features

This camera adopts high performance sensor and advanced print

circuit board design technology. It possesses of high resolution,

low distortion, and low noise features, etc. It is extremely suitable

for surveillance system and image process system.

 Supply high definition and clear image  Integrate infrared lights to allow the camera to be used both in

the day and the night

 Day Night Auto Switch  Support auto white balance with high color rendition  Back Light Compensation  Support 3D digital noise reduction  Support SMART IR function

Note: Only the DS-2CC1172P(N)-IR1T(IR3T)(IR5T) and

DS-2CC1182P(N)-IR1T(IR3T)(IR5T) models support the 3D digital

noise reduction and SMART IR functions.

 Support auto electronic shutter control to adapt to different

environments

 Support auto gain control, adaptive brightness  High SNR lead to clear and pleased image

IR Bullet Camera· User Manual

 Advanced engineering design, high Reliability  Ingress Protection: IP66

1.2 Overview

The appearances of the cameras are as follows:

Camera A:

Figure 1-1 Overview of

DS-2CC102/112/192/1182/1192/11A2P(N)-IR1(IR3)(IR5) and

1172/1182P(N)-IR1T(IR3T)(IR5T)

1 Sun Shield

2 Lock Screw

IR Bullet Camera· User Manual

Camera B:

Figure 1-2 Overview of

DS-2CC102/112/192/1182/1192/11A2P(N)-IRA

1 Sun Shield

2 Lock Screw

IR Bullet Camera· User Manual

Camera C:

Figure 1-3 Overview of DS-2CC102/112/192/1132P(N)-IR

1 Power Supply Interface

2 Video Interface

3 Mounting Base

4 Bracket

IR Bullet Camera· User Manual

2 Installation

Before you start:

Please make sure that the device in the package is in good

condition and all the assembly parts are included.

Notes:

 IR bullet camera is usually used for outdoor or indoor with low

illumination environment. It is usually installed on the wall, so

please refer to the following steps of wall mounting to install

the camera.

 Please ensure that the wall is strong enough to withstand more

than 3 times the weight of the camera and the bracket. If the

wall is not strong enough, the camera may fall and cause

serious damage.

 For the cement wall, you need to mount the camera with

expansion screws. For the woodiness wall, you can mount the

camera with self-tapping screws.

2.1 Installation of Camera A

Notes:

 The models of camera A are

DS-2CC102/112/192/1182/1192/11A2P(N)-IR1(IR3)(IR5)

and 1172/1182P(N)-IR1T(IR3T)(IR5T).

 The mount must be longer than 1/2 the length of camera.

IR Bullet Camera· User Manual

Steps:

1. Attach the wall mount to the wall, and use screws to fix it as

shown in Figure 2-1.

Figure 2-1 Fix the Wall Mount

2. Attach the camera mounting base to the wall mount.

3. Secure the camera to the wall mount with screws as shown in

Figure 2-2.

IR Bullet Camera· User Manual

Figure 2-2 Fix the Camera

4. Loosen the panning screw and tilting screw of the mount as

shown in Figure 2-3.

5. Adjust the camera to the desired monitoring angle.

6. Tighten the panning and tilting screws.

Figure 2-3 Adjust the Monitoring Angle

Panning Screw

Tilting Screw

IR Bullet Camera· User Manual

2.2 Installation of Camera B

Notes:

 The models of camera B are

DS-2CC102/112/192/1182/1192/11A2P(N)-IRA.

 The mount must be longer than 1/2 the length of camera.

Steps:

1. Attach the wall mount to the wall, and use screws to fix it as

shown in Figure 2-4.

Figure 2-4 Fix the Wall Mount

2. Attach the camera mounting base to the wall mount.

3. Secure the camera to the wall mount with screws as shown in

Figure 2-5.

IR Bullet Camera· User Manual

Figure 2-5 Fix the Camera

4. Loosen the panning screw and tilting screw of the mount as

shown in Figure 2-6.

5. Adjust the camera to the desired monitoring angle.

6. Tighten the panning and tilting screws.

Figure 2-6 Adjust the Monitoring Angle

Panning Screw

Tilting Screw

IR Bullet Camera· User Manual

2.3 Installation of Camera C

Note: The models of camera C are

DS-2CC102/112/192/1132P(N)-IR.

Steps:

1. Place the drill template on the wall and drill screw holes

according to the drill template.

Figure 2-7 Drill Template

2. Secure the mounting base to the wall with screws as shown in

Figure 2-8.

3. Route the cables inside the wall or on the surface.

IR Bullet Camera· User Manual

If you want to route the cables inside the ceiling, drill a hole in

the ceiling for wiring and pull all the cables through the hole

and terminate all wires.

4. Connect the cables to the corresponding connectors on the

camera.

Figure 2-8 Secure the Camera

5. Apply the power to the camera.

6. Position the camera.

1). View the camera image using the service interface.

2). Loosen the panning table as shown in Figure 2-9.

3). Rotate the panning table to adjust the panning position of

the camera. The adjusting range is from 0 degree to 360

degrees.

Wall

IR Bullet Camera· User Manual

4). Tighten the panning table.

5). Loosen the tilting lock screw as shown in Figure 2-9.

6). Rotate the tilting lock screw to adjust the tilting position of

the camera. The adjusting range is from 0 degree to 90

degrees.

7). Tighten the tilting lock screw.

8). Loosen the rotation lock screw as shown in Figure 2-9.

9). Rotate the lens to adjust the azimuth angle of the image.

The adjusting range is from 0 degree to 360 degrees.

10). Tighten the rotation lock screw.

Figure 2-9 Adjust Monitoring Angle

2.4 Wiring

Camera A and C

Note: The models of camera A and C are

DS-2CC102/112/192/1182/1192/11A2P(N)-IR1(IR3)(IR5),

Tilt

Rotation

Panning

Lock Screw

Panning Table

Rotation

Lock Screw

Pan

IR Bullet Camera· User Manual

1172/1182P(N)-IR1T(IR3T)(IR5T) and

DS-2CC102/112/192/1132P(N)-IR.

 Please make sure that the power adapter can match with that

of the camera.

 The standard power supply of the camera is 12V DC (Please

refer to technical specifications for more details).

 Please plug the power adapter not too far away because the

transmission distance of DC power is limited.

Figure 2-10 Connections

Camera B

Note: The models of camera B are

DS-2CC102/112/192/1182/1192/11A2P(N)-IRA.

IR Bullet Camera· User Manual

 Please make sure that the power adapter can match with that

of the camera.

 The standard power supply of the camera is 24V AC (Please

refer to technical specifications for more details).

Figure 2-11 Connections

IR Bullet Camera· User Manual

Appendix

1 Glossary

Note:

The glossary gives brief explanations to the basic operation

principle or the basic function of the camera. However, it doesn’t

mean the listed functions are all supported by these series of

cameras. Please take the function in the corresponding

specification as the standard.

Definition:

Definition is the degree to distinguish the edge between two parts.

Contrast:

Contrast is the color difference between the brightest and darkest

parts.

Saturation:

Saturation is the degree of color purity. The color is purer, the

image is brighter.

DAY/NIGHT Auto Switch:

The cameras deliver color images during the day. And as light

dim inishes at night, the cameras switch to night mode and deliver

black and white images with high quality.

AGC:

IR Bullet Camera· User Manual

AGC is a control circuit that automatically changes the gain of a

receiver or other pieces of equipment, so that the desired output

signal remains essentially. When under low illumination, AGC will

regulate the gain and amplification of the video signal.

S/N ratio:

It is the ratio of Signal voltage to noise voltage. The ratio is larger,

the effect of noise is less, and the image is clearer.

White Balance:

White balance can remove the unrealistic color casts. White

balance is the white rendition function of the camera to adjust the

color temperature according to the environment automatically.

BLC:

If you focus on an object against strong backlight, the object will

be too dark to be seen clearly. The BLC (Backlight Compensation)

function can compensate light to the object in the front to make it

clear, but this causes the over-exposure of the background where

the light is strong.

SMART IR:

The SMART IR adopts the smart image processing technique to

automatically adjust the brightness curve by detecting multi-zone

brightness, and so as to prevent the over exposure of central point

existed in short IR distance conditions.

Motion Detection:

IR Bullet Camera· User Manual

In the user-defined motion detection surveillance area, the moving

object can be detected and trigger alarm. The sensitive level can

be customized according to the environment.

Privacy Mask:

This function allows you to block or mask certain area of a scene,

thus prevent the personal privacy from recording or live viewing.

OSD (On Screen Display):

OSD is the texts superimposed on a screen. It can show the menu

on the screen.

Synchronous System:

There are two modes for the camera synchronization. Internal

synchronization is realiz ed by the synchronous signal which is

generated by the inside crystal oscillator.

ICR Auto Switch:

The filter will filter infrared light during the daytime and change to

normal filter at night to ensure a high sensitivity and clear image.

WDR (Wide Dynamic Range):

The wide dynamic range (WDR) function helps the camera provide

clear images even under back light circumstances. When there are

both very bright and very dark areas simultaneously in t he field of

view, WDR balances the brightness level of the whole image and

provide clear images with details.

EIS (Electronic Image Stabilization):

Electronic image stabilization function can reduce certain ranges of

vibration which is caused by the external environment.

IR Bullet Camera· User Manual

3D Digital Noise Reduction:

Comparing with the general 2D digital noise reduction, the 3D

digital noise reduction function processes the noise initiated by

CCD besides processing the noise in the separated Y video signal

and C video signal.

HLC (High Light Compensation):

The HLC is capable of detecting and reversing the bright spots in

the picture (such as headlights) to black so as to achieve optimum

picture quality.

Digital Zoom:

Digital zoom helps to crop the entire image, and then digitally

enlarge the size of a portion of image that is needed to zoom in on.

IR Bullet Camera· User Manual

2 Troubleshooting

Problem 1:

Why does the camera restart intermittently? And the problem is

much more serious when infrared lights of IR camera are turned on

at night.

Possible Reasons:

The main and common reason is power supply shortage. This

problem may happen to the IR camera especially at night, because

the infrared lights are turned on at night and increase the power

consumption.

To Solve the Problem:

You need to ensure that the power supply matches with ±10% of

the nominal voltage. And the power consumption of power adapter

should meet the demand of the camera.

Problem 2:

The camera can never be focused by adjusting the focus-stick on

the lens. And there is also no use adjusting the back focus.

Possible Reasons:

The camera needs the lens with CS lens mount. When you install a

lens with C lens mount, the camera will never focus.

To Solve the Problem:

You can change a lens with CS lens mount to the camera.

IR Bullet Camera· User Manual

Or you can use a C/CS adapter ring between the camera and the

lens with C lens mount.

Problem 3:

The camera is installed with an auto-iris lens. You adjust the focus

to get a clear image in the daytime. But the image is defocused at

night.

Possible Reasons:

In the daytime, the illumination is high, so the iris is adjusted to a

small size automatically. The DOF (depth of field) is long. But at

night, the iris is adjusted to a large size automatically, so the DOF

is shortened. The focus you adjusted in the daytime now locates

out of the DOF, so the image is defocused at night.

To Solve the Problem:

When you adjust the focus for a camera w ith an auto-iris lens, you

need to set the lens type to AES (auto electronic shutter) mode.

Under AES mode, the iris is adjusted to the largest size

automatically. Then you can adjust the focus to get a clear image.

At last, you need to set the lens type back to AI (auto iris) mode.

Or you can adjust the focus in low illumination condition, such as at

night.

Problem 4:

A camera with OSD menu and an auto-iris lens displays black video.

But the OSD menu can be called and displayed.

IR Bullet Camera· User Manual

Possible Reasons:

Auto-iris lens connector is loose contact.

Or the iris driven mode of the camera does not match with the

mode of auto-iris lens.

To Solve the Problem:

Check the auto-iris lens connector to ensure good contact.

Set the iris driven mode of the camera the same as that of lens.

The modes can be VD (video drive) or DD (direct drive). DD mode

is commonly used.

3 Technical Maintenance

Lens Maintenance

The lens surface is plated an anti-reflection coating. The dust, oil

and finger print, etc. will cause scratch, mildewed and

performance degraded. Please refer to the following method to

clean the lens.

 Handling dust

Use oil free soft brush or blowing dust ball to clean the dust.

 Handling oil

Steps:

1. Wipe off the water-drop or oil by soft cloth and dry the lens.

2. Use oil free cotton cloth or lens clean paper to wipe the lens

from center to outside with alcohol or detergent.

3. Change the cloth to wipe the lens until the lens is clean.

IR Bullet Camera· User Manual

Bubble Maintenance of Domes

The bubble is of transparent plastic. The dust, oil and finger print,

etc. will cause scratch or image blur. Please refer to the fo llowing

method to clean the bubble.

 Handling dust

Use oil free soft brush or blowing dust ball to clean the dust.

 Handling oil

Steps:

1. Wipe off the water-drop or oil by soft cloth and dry the bubble.

2. Use oil free cotton cloth or bubble clean paper to wipe the

bubble from center to outside with alcohol or detergent.

3. Change the cloth to wipe the bubble until the bubble is clean.

Glass Maintenance of IR Camera

Steps:

1. Wipe off the dust, water-drop or oil by soft cloth and dry the

glass.

2. Use oil free cotton cloth or glass clean paper to wipe the glass

from center to outside with alcohol or detergent.

3. Change the cloth to wipe the glass until the glass is clean.

IR Bullet Camera· User Manual

HIKVISION DS-2CC102PN-IR1, DS-2CC102P-IR3, DS-2CC102P-IR1, DS-2CC102PN-IR3, DS-2CC102PN-IR5 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual