720TVL High Resolution
Please read this manual thoroughly before use, and keep it handy for future reference.
INSTRUCTION MANUAL
WARNINGS AND CAUTIONS
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT
THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT.
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated ''dangerous
voltage'' within the product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(Servicing) instructions in the literature accompanying the product.
PRECAUTIONS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICABLE PARTS INSIDE.
REFFER SERVICING TO QUALIFIED SERVICE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
Installation
Do not install the unit in an extremely hot or humid place or in a place subject to excessive dust, mechanical vibration.
Cleaning
Clean the unit with a slightly damp soft cloth.
Use a mild household detergent. Never use strong solvents such as thinner or benzene as they might damage the
finish of the unit.
Retain the original carton and packing materials for safe transport of this unit in the future.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been moisture, does not operate normally, or has
been dropped.
15. CAUTION – THESE SERVICING INSTRUCTIONS ARE FOR USE BY
QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER
THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS
UNLESS YOU QRE QUALIFIED TO DO SO.
16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed
Class 2 power source only.
FCC COMPLIANCE STATEMENT
CE COMPLIANCE STATEMENT
INFORMATION TO THE USER: THIS EQUIPMENT HAS BEEN TESTED AND
FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE,
PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO
PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN
THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS
EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY
AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION
MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE
PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY
TO OPERATE THE EQUIPMENT.
THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE A EST CONFORME À LA NORME NMB-
003 DU CANADA.
WARNING: This is a Class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take adequate
measures.
INTRODUCTION
The camera provides high-resolution images using 720TVL CMOS and digital
Signal processors.
Features:
● 1/3" 720TVL CMOS for an image of high sensitivity
● 2.8-12mm Vari-Focal lens
● Excellent picture quality
● 720 lines of horizontal resolution
● Auto electronic shutter
● Auto white balance modes
● Day & Night ( ICR-Filter )
● AGC ( Auto Gain Control )
● VIDEO OUT ( BNC )
● 30M IR LED’s
● IP66 Ingress Rating
● Operates in 12VDC
( Power supply not included so please use a power supply capable of
supplying over 1,000mA.)
● Use Certified / Listed Class 2 power source only.
IMPORTANT: The user of this camera is responsible for
checking and complying with local, state, and federal laws
and statutes concerning the recording and monitoring of
audio signals.
INSTALLATION
Carefully remove the contents from the box, and verity that nothing was damaged in
shipment.
1) Mark the screw hole positions on the ceiling or wall surface using the Template
Sheet.
2) Disassemble the camera by removing the dome cover.
3) Mount the camera assembly using the Anchors (x2) and Screws (x2) to
the surface of the ceiling or wall.
4) Adjust Zoom and Focus.
EXTERNAL DIMENSION (mm)
SPECIFICATIONS
VIDEO
Image Device
1/3'' DIS
TV System
PAL/NTSC
Effective Pixels
853(H)×640(V)
Scanning System
Progressive
Synchronization
Internal
Horizontal Resolution
720TVL
Min. Illumination
0 Lux (IR LED on)
S/N Ratio
>52dB
Video Output
1Vp-p, 75ohm, BNC
LENS
Focal Length
2.8-12mm Vari-Focal Lens
OPERATIONAL
Day & Night
Auto (ICR)
Backlight Compensation
Auto
Gain control
Auto
White Balance
Auto
Electronic Shutter Speed
1/25 ~ 1/15,000sec
Infrared LED
36 EA
IR Distance
30 Meters
IR-CUT Filter
YES
Infrared Spectrum
850nm
ENVIRONMENTAL
Operation Temperature
-20℃~ +50℃
Water-proof Casing
IP66
ELECTRICAL
Input Voltage/Current
DC12V480mA
Adapter Requirement
DC12V1A
MECHANICAL
Color
white
Bracket
All-Oriented Bracket
Dimensions
135x105 mm
Net Weight
746g/pcs
720TVL Super High Resolution
Day & Night Color Camera
Loading...