High Tech Pet POWER PET, Armor Flex Installation And Operating Instructions Manual

POWER PET®

Low-E Automatic Patio Pet Door

Installation and Operating Instructions

2

Power Pet, Regular Height, Patio Door Assembly Steps

Estimated assembly time: Under 1 hour

1. Size #1 Phillips screwdriver

2. Electric drill

3. #32 (.117”) drill bit

4. 3/32” drill bit

5. 1/4 drill bit

6. Scissors

7. Tape Measure

8. Pencil

9. Safety Glasses

STEP 2. Unpack your door

Remove all parts from box. Plastic corner protectors may be discarded.

STEP 3: Lay Out All Included Parts

Your door contains all of the parts shown in Figures 3A and 3B and
listed below.

1. Bottom Panel Assembly with PX-2 Power Pet Door

2. Top Panel Assembly

3. MS-4 Ultrasonic Collar or MS-5 Collar Kit

4. AC Adapter

5. Range Knobs (2)

6. Weather Stripping

7. Draft Stopper Seal

8. Section Connectors (2)

9. Door Lock Housing (1)

10. Lock Handle (1)

11. Lock Hasp (1)

12. House Lock Tab (2)

13. Vacation Lock (1)

14. Rectangular Hole Plug (1)

15. Round Hold Plug (2)

16. 1/16 Allen wrench

17. 1/8 Allen wrench

18. 1/4-20 X 1/2 flat head machine screw (8)

19. #8 X 5/8 round head sheet metal screw (4)

20. #6 X 1/2 round head sheet metal screw (6)

21. #4 X 3/8 flat head sheet metal screw (4)

STEP 1: Assemble the tools you will need:

Figure 1

Figure 2

3

Fig 3A

4

4

Figure 3B

5

Fig 3A

Figure 3C

Basic Door Assembly

May be placed on left or
right side of Patio Pet
Door assembly.