Highside Chemicals Inc. HS10001, HS10004, HS10016, HS10128, HS11001 User Manual

Chemicals

SUPCO’s family of chemical

products combine the strength of SUPCO

branded products with the uniquely engineered

products from Highside Chemicals, Inc. A broad

product offering fills the needs of service

professionals.

Applications:

• HVAC

• Refrigeration

• Plumbing

• Appliance

• Automotive

• General Maintenance

SEALED UNIT PARTS CO., INC.

PO Box 21, 2230 Landmark Place, Allenwood, NJ USA

732-223-6644 • Fax [phone]

www.supco.com • [e-mail]

Leak Lock and Leak Lock GOLD with Teflon

A resin based soft setting brushable paste pipe joint compound
resistant to all refrigerants, oils, water and most chemicals, liquids and gases.

• Use with pressures to 10,000 PSI to full vacuums.

• Temperature range -200°F (-93°C) to 400°F (204°C).

• It never hardens and it never becomes brittle.

• Ideal for joining all metals, plastics and other materials.

• Will stick to all clean surfaces.

• Prevent vibration from loosening nuts, bolts, plugs and fittings.

• Non Toxic

• GUARANTEES A PERFECT SEAL… UNDER ALL CONDITIONS

PART NO. SIZE PACKAGING
LEAK LOCK

HS10001 1-1/3 oz TUBE 12/CASE
HS10004 4 oz Brush Top Plastic Jar 12/CASE
HS10016 16 oz Br ush Top Plastic Jar 12/CASE
HS10128 1 Gallon Can 1

LEAK LOCK GOLD

HS11001 1-1/3 oz TUBE 12/CASE
HS11004 4 oz Brush Top Plastic Jar 12/CASE
HS11016 16 oz Br ush Top Plastic Jar 12/CASE
HS11128 1 Gallon Can 1

Red Epoxy

When you need a sealant you can count on.
High Performance, Heat Cured, Two Part, Epoxy Kit

• Exhibits a Color Change When Cured (Turns Gold)

• May Be Cured With a Hot Air Gun or Open Flame in Minutes

• -100°F (-73°C) to 300°F (149°C) • Equipment is Serviceable Immediately

• Working Pressure in Excess of 3000 PSI • Use on All Metals and Rigid Plastics

• Tensile Strength: 6000 PSI • HVAC & Refrigeration

• Works on Vertical Surfaces • Plumbing & Appliances

• Pressure Tested to 3000 psi • Automotive & Marine

• Simple, Quick Mixing & Application • Petrochemical, Manufacturing

• Oil, Gas, Fuel & Solvent Resistant • Industrial, Commercial, Institutional

• No Rush, No Wait, You Control Curing Time

PART NO. SIZE PACKAGING

HS12001 Kit Including 2 1/2 oz Tubes 12/CASE

Solderlene

High Quality, Paste Type, Non-Acid Soldering Flux.

• Industrial strength wetting agents to promote solder flow

• For use with low and mid-temp. soft solders, both lead and lead-free

• Effective on all metals except aluminum and magnesium.

• Brush Top Plastic Jars

PART NO. SIZE PACKAGING

HS30004 4 oz 12/CASE
HS30016 16 o z 12/CASE

Thawzone

(New Formula)
The original liquid dehydrant, frees your frozen system in minutes.
It seeks out moisture and chemically bonds to it.

• Enhanced moisture control in even the most advanced systems.

• Aids with oil return in low temperature systems.

• Compatible with all refrigerants and refrigeration lubricants.

• Helps prevent the formation of acid. • Safer

• No Methanol • Biodegradable, non-polluting

• Environmentaly Sound • Non-Poisonous

Add 1/8 fluid ounce ( 3.75 ml ) of THAWZONE directly to the refrigerant of any
system for every 1 lb. Of refrigerant in the system.
*HIGHSIDE SYSTEM INJECTOR (part no. HSINJ001) IS RECOMMENDED FOR
INTRODUCING THAWZONE INTO AN OPERATING SYSTEM.

PART NO. BOTTLE SIZE PACKGING

HS17001 1 oz 24/CASE
HS17004 4 oz 12/CASE
HS17016 16 o z 6/CASE

* MSDS Sheets are available for all chemicals, visit www.supco.com or call SUPCO at [phone].

Highside System Injector

Use for introducing any liquid into the low side of a charged
hermetic system.

• Entirely reusable

• Constructed of rugged aluminum for long life

• Designed for use with any standard manifold gauge and requires

no extra valves or fittings

• Drip proof, no spill design takes the mess out of maintenance

• Helps prevent the venting of refrigerants into the atmosphere.

• Prevents the introduction of air into an operating system.

• It can be used on sealed operating systems to avoid shutdowns.

• Use with Trace, Trace 2, Thawzone and Acid Neutralizer

• Compatible with all refrigerants

PART NO. PACKAGING

HSINJ001 1

Gas Leak Detector
Low Temp

Leaks appear as large strong bubbles which cling to the surface and are fluorescent under a
black light.

• Non-freezing • Non-toxic

• Fluorescent • Non-hazardous

• Rated to -30°F (-34°C) • Bubble-type gas leak detector

Use On:

• Hot and cold piping • Air

• Natural Gas • All Refrigerants

• Most Gases

Gas Leak Detector
Mid Temp

Same as above except:

• Rated to 27°F (-3°C)

PART CONTAINER
NO. SIZE TYPE PACKAGING
Low Temp

HS22008 8 oz Plastic Bottle w/Dauber 24/CASE
HS22032 32 oz Trigger Sprayer Bottle 12/CASE
HS22128 1 GAL. Plastic Bottle 6/CASE

Mid Temp

HS23008 8 oz Plastic bottle w/Dauber 24/CASE
HS23032 32 oz Trigger Sprayer Bottle 12/CASE
HS23128 1 GAL. Plastic Bottle 6/CASE

Trax

Bubble-type liquid leak detector formulated to produce long lasting bubbles
under ‘job-site’ conditions.

• Clear • Non-Toxic

• No Cleanup • Does Not Pit Surfaces

• Environmentally Friendly • Detects Leaks as Small as 1 Micron

• Evaporates Leaving No Residue • Oxygen Compatible

• Temp Range: 27°F (-3°C) to 200°F (93°C).

Meets the performance requirements of Military specifications:
MIL 25567 Type I A, B & C.

PART CONTAINER
NO. SIZE TYPE PACKAGING

HS24000 1-1/3 oz Squeeze Bottle 24/CASE
HS24010 10 oz Squeeze Bottle w/ 12/CASE

HS24128 1 GAL. Bo ttle 6/CASE

Extenable Spout

* MSDS Sheets are available for all chemicals, visit www.supco.com or call SUPCO at [phone].