1
RocketStor 5411D
USB 3.0 Drive and I/O Docking Station
Quick Installation Guide
V1.00
2
Table of Contents
1. HighPoint RocketStor 5411D ............................... 3
2. System Requirements ......................................... 3
3. RocketStor 5411D Hardware ............................... 4
4. Setup Procedures ................................................ 5
4.1 What’s in the box....................................................... 5
4.2 Connecting the RocketStor 5411D (RS5411D) ........... 6
4.3 Driver installation ...................................................... 6
4.4 SATA Drives Installation and Ejection ........................ 7
5. Support information ........................................... 8
3
1. HighPoint RocketStor 5411D
The RocketStor 5411D is the industry’s most versatile USB
3.0 Drive and I/O Docking Station!
High-Speed Storage & Peripherals - 6Gb/s SATA dock
and Three 5Gb/s USB 3.0 ports.
Integrated Audio Ports - Support headphones, speakers
and headsets.
SD card reader socket - Supports UHS-I SD cards
Built-in Gigabyte Ethernet port - Share devices over
your local network or internet connection!
2. System Requirements
A. Mac or PC with a USB port
B. Operating System:
Mac OS X 10.8.6 or higher
Windows 7 or higher
4
3. RocketStor 5411D Hardware
Front side:
Front left
5
Rear right
4. Setup Procedures
4.1 What’s in the box
RocketStor 5411D
Power Adapter
Quick Installation Guide
Software CD
USB 3.0 cable
6
4.2 Connecting the RocketStor 5411D (RS5411D)
Steps:
1) Connect the Power Adapter to the RocketStor 5411D.
2) Connect the RocketStor 5411D to the host system with the
USB 3.0 cable.
3) Power on the RS5411D with the built-in power button.
Note: The Power button of RS5411D is also used to power off
the device. Press and hold the power button for 3 seconds to
power of the device.
4.3 Driver installation
1) Mac OS X and Windows 7 and later include driver support
for the RocketStor 5411D, and will automatically recognize
the device.
For Windows, please make use the host system’s USB
controller driver is correctly installed.
2) Driver Installation: Ethernet
The Ethernet driver is available from the RS5411D’s Resources
page:
http://www.highpointtech.com/USA_new/series_RS5411D-resources.htm
7
The software CD also includes a copy of the Ethernet
driver.
For Mac OS X:
Double click the .dmg file to install the Ethernet driver for
the RS5411D.
For Windows:
Double click the .exe file to install the Ethernet driver for
the RS5411D.
4.4 SATA Drives Installation and Ejection
The RocketStor 5411D supports 2.5” and 3.5” SATA SSD’s
and hard drives devices of any performance level and
capacity.
Installing a Device - Carefully align the SATA device’s gold
fingers with the bay’s SATA connector. Gently push the
device straight down until secure.
Remove a Device - Hold the base of the RocketStor device
and gently remove the drive by pulling straight upwards.
Note: The surface temperature of some 3.5" hard disks
may exceed 50 degrees C. Carefully assess the surface
temperature of any hard disk before removal.
8
5. Support information
If you encounter any problems while utilizing the RocketStor 5411D, or
have any questions about this or any other HighPoint Technologies, Inc.
product, feel free to contact our Customer Support Department.
Web Support: http://www.highpoint-tech.com/websupport/
HighPoint Technologies, Inc. websites:
http://www.highpoint-tech.com
http://www.hptmac.com
Sept. 19, 2014
© Copyright 2014 HighPoint Technologies, Inc. All right reserved.
Loading...