50" SOFA TABLE
Thank you for purchasing this quality product.Be sure to check all packaging material
carefully for small parts that may have come loose inside the carton during shipment.
COMPONENT LIST:
PART NO
01
13
07
22
FIGURE
This product will take 15-20
minutes to assemble.
DESCRIPTION
Hardware Bag
Table Top
Legs
Fixed Shelf
QTY
1 pce
1 pce
4 pcs
1 pce
HARDWARE LIST:
PART NO
1
2
3
4
FIGURE
DESCRIPTION
HexBolt
Lock Washer
Flat Washer
Wrench
QTY
8 pcs
8 pcs
8 pcs
1 pce
Reminders
1.Use only the hardware supplied.
2.Once the product is assemble,level and tighten all the bolts.
3.Do not over-tighten bolts.
4.This item may require periodic tightening
13
NOTE:
1.Two or two people are needed for assembly
2 please keep all hardware parts out of the reach of children.
07
Page 1 of 2
22
MADE IN MALAYSIA
50" SOFA TABLE
ASSEMBLY :
STEP 1
1.1- Pull out the Drawer as shown on Fig.1 And Turn the sofa Table upside down on a soft protective surface such as carpet.
1.2- Attach 3 of the 4 legs to the Table Tops using the provided hardware as shown on Fig.1 Do not fully tighten bolts yet.
Flat Washer
Lock Washer
Hex Bolt
Wrench
Fig.1
STEP 2
2.1-Insert the Fixed Shelf into the already installed legs as shown on Fig.2
Insert the last leg to the corner of apron frame and Fixed Shelf.
Once fixed shelf is installed attached the remaining legs using the provided hardware as shown on Fig.2.
Fig.2
STEP 3
3.1- Close all drawers.
3.2- Turn table to upright position.
Once sofa table is fully balance fully tighten all bolts.
Assembly is now Completed.
Page 2 of 2
CARE INSTRUCTION
~ Be sure to use the same type of polish consistently.
Your furniture will appear cloudy or streaky if oil
based or wax based polishes are interchanged.
~ Spray your furniture surface evenly. Wipe in a
circular motion with a soft clean cloth.
MADE IN MALAYSIA
Loading...