Highgear VIA Wrist User Manual
ÕÈÀ Цситу
TABLE OF CONTENTS
CARE AND MAINTENANCE 2
KEYS AND THEIR FUNCTIONS 3
MODES OF OPERATION 5
SETTING THE WATCH FUNCTIONS 7
SETTING TIME 7
SETTING USER DATA 8
DETERMINING YOUR STRIDE LENGTH 9
SETTING THE DAILY ALARM 10
english
OPERATING THE PEDOMETER 11
OPERATING DAILY ALARM 13
OPERATING THE CHRONOGRAPH 13
SPECIFICATIONS & RANGES 14
1
CARE AND MAINTENANCE
Your WRIST PEDOMETER is a highly accurate and reliable
pedometer and is effective for walking.
WARNING: Before starting any exercise program, we
strongly suggest you visit your doctor for a complete
physical and to discuss your exercise plans.
1. Avoid Extreme Temperatures.
2. To clean the unit, use a dry soft cloth or a soft cloth
moistened in a solution of water and a mild neutral
detergent. Never use volatile agents such as benzene,
thinner, spray cleaners, etc.
3. Store your pedometer unit in a cool, dry place when not
in use.
4. Cold temperatures may cause the display to dim or fail
completely. Normal operation should return when the unit
warms up.
5. Keep this manual and any other documentation that
comes with the unit in a safe place for future reference.
BATTERY INSTALLATION
The Wrist Pedometer is a technical instrument. To ensure
proper operation and to maintain a water resistant seal, we
recommend that you have your local jeweler or specialty
retail shop replace the watch batteries. Improper replacement of the battery may damage the watch and will void the
manufacturers warranty.
english
2
KEYS AND THEIR FUNCTIONS
START/STOP KEY
MODE KEY
MODE KEY
english
- Scrolls through various modes of the pedometer
- Advances to next variable in setting sequence.
START/STOP KEY
- Scrolls through sub modes in STEP and DATA modes
- Increases variable in setting sequence
- Starts/Stops the Chronograph
- Turns Daily Alarm On/Off
- Toggles through sub modes in Step mode
- Toggles between pounds/kilograms (weight setting)
- Toggles between inches/centimeters (setting stride length)
3
KEYS AND THEIR FUNCTIONS
ADJUST KEY
RESET KEY
RESET KEY
- Decreases variable in setting sequence
- Clears time in Chronograph
- Toggles between miles/kilometers (Step/Distance mode)
- Clears data (Steps, distance, calories, timer) in Step mode
ADJUST KEY
- Activates EL/Backlight
- Enters the setting sequence for each setting mode
english
4
Loading...