Hifonics HIF-UNI6 User Manual
UTV & RZR Tuned Audio Systems
HIF-UNI6
Universal 6 Inch STAGE 2
500 Watt UTV Audio System
For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
©2018 Maxxsonics USA
HIFONICS UNIVERSAL 6 INCH
Thanks for choosing HIFONICS. This UTV Tuned Audio System has been meticulously
engineered to install into your vehicle. We have made the process so simple you will be in and
out of the installation in about 2 hours.
WARRANTY
Your audio system is covered by a 1 year warranty. It is important that you keep your sales
receipt. Furthermore, it is crucial that you record and store a record of the serial numbers for
each of the components that are included in your system. In the rare instance that a warranty
claim is needed both items are required. Additional information is on the back page.
A) Sales Receipts showing the seller, date of purchase, model and price paid
B) Serial numbers for the components
INCLUDED
Bluetooth controller
Compact 2 channel amplifier
Pair of roll cage mounted Tower Speakers
2 swivel mount brackets
Powersports wiring harness
SAFETY
Always make your machine safe before installing any accessories
Turn the ignition off and remove the key
Remove the negative terminal of the battery
Safety Glasses - always wear eye protection
TIME & TOOLS
You will need about 2 HOURS to complete this installation, depending on who is “helping.”
TOOLS Required
1-1/8 inch hole saw
Allen key set
Hand Screwdrivers
Assortment of Sockets and Wrenches
Wire Strippers and Crimpers
For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
©2018 Maxxsonics USA
STEP 1 - BLUETOOTH LOCATION & MOUNT
The Bluetooth controller is designed to mount in a 1-1/8 inch hole. Make sure there are no wire
harnesses or mechanical parts behind the panel you would like to mount the unit.
Choose a location that is as high in the vehicle as possible to avoid deep water or mud.
The Hifonics Bluetooth Joystick Controller is so universal it can be disguiused
and hidden in an off-road vehcle or classic custom build.
STEP 2 - AMP LOCATION & MOUNT
When you can, try to avoid wiring accessories directly to the battery. This is due to the fact that
most UTV have their battery located low in the vehicle. You want your amplifier wired to your
accessory terminal, which is usually mounted high in the dash.
Secure the amplifiers with zip ties or small screws, depending on the area where you secure the
amplifier.
For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
©2018 Maxxsonics USA
Loading...