HiFiMAN Jade II User Manual
Electrostatic Headphone System
User Guide
Safety Cautions
WARNING
RISK OF EL ECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Warning: Non-insulated dangerous voltage within the product,s enclosure
may be of sufficient magnitude to constitute a risk of electric shock.
Important operating and maintenance instructions in this user guide.
Warning: To avoid fire or shock hazard, this product should not be exposed
to rain or other moisture.
Note:
To completely cut off the power, the electrical plug should be unplugged.
01
Safety Cautions
Warning:
Amplifier
•
Please read instructions carefully. Store and retain the operations guide for future reference.
Pay attention to all warning information and operate in accordance with the instructions.
•
Avoid high ambient temperature use. Do not operate the amplifier in a room temperature over
40℃ or 104℉. Please allow the heat to fully dissipate after use.
•
Grasp the plug firmly when the power cable is being unplugged. Do not pull the cable to unplug.
•
This product should not be placed in a dusty, dirty environment or be exposed to very high
humidit y (sauna, bathroom etc.)
•
The plug should be unplugged if the product will not be used for a long time.
•
Air ventilation should not be blocked or obstructed.
•
Nothing should be dropped into the amplifier. This could cause damage.
•
Do not expose the product to chemicals such as pesticides, benzene, acids or alkaline.
•
This product should not be disassembled or refitted by anyone other than HIFIMAN.
•
To avoid fire, while the amplifier is working, air vents should not be obstructed with papers,
tablecloth, curtains or any other items.
•
Open flames such as candles should not be placed on or near the amplifier.
•
Highly flammable, liquids should not be dropped or sprayed on the amplifier.
•
To avoid fire hazard, items containing liquids such as vases or glasses should not be placed on
the amplifier.
•
Do no operate with wet or oily hands.
•
There is high output on the output terminal of front panel of the amplifier.
To avoid shock hazard, nothing should be inserted in the output por t of the
amplifier except a suitable headphone jack.
•
The power cable should not be trampled on or be a trip hazard.
•
Accessories and spare parts used should be specified by HIFIMAN only.
•
In case of electrical storms please remove the plug from the power socket.
02
Safety Cautions
Headphone
To avoid risk of electric shock and to protect the diaphragm from being damaged, nothing
•
should be inserted into the grill on the headphone.
As with the amplifier, the headphone should be kept away from a high temperature environ-
•
ment ( ambient temperature should not exceed 40℃ or 104℉. )
Keep the headphone away from substances such as alcohol, gasoline, acetone, other solvents,
•
sulfuric acid, sodium hydroxide or any other corrosive substances.
Do not treat the headphone violently as this may cause permanent damage to the internal
•
structure and invalidate the warranty.
If the headphone should get wet, do not use a heat gun or hairdryer on the product as this
•
could permanently damage the headphone's diaphragm. Allow to dry naturally in a warm but
dry environment such as an airing cupboard.
Do not use the headphone with wet hair.
•
If the product is to be left unused for a long time, please keep in the storage box and seal with
•
a moisture-proofing agent to prevent mould or corrosion.
03
Table of Contents
Thank you for your purchase of the Jade II Electrostatic Headphone System.
To ensure the correct operation, please read the operating instructions carefully.
After reading, please retain for reference in the future.
Technical Data ………………………………
Features ………………………………………
Notes for Operation ……………….......
Functions ……….....................................
Initial Setup …………………………..........
Basic Connection ………………………...
Basic Operation ……………………..…….
Limited Warranty and …………………...
Customer Service
5
6
8
9
11
12
15
16
* Please be advised that illustrations may be different from the real system for the
purpose of explanation.
04
Specifications
Headphone
Frequency Response: 7Hz -90kHz
Bias Voltage: 550V-650V
Weight: 365g (12.9oz)
Amplifier
Weight: 6.5kg (14.3lb)
Dimensions: 276 x 270 x 116mm (10.9" x 10.6" x 4.6")
3
Accessories
No. Items Quantity
1 Power Cable 1pc
2 Electrostatic Headphone 1pc
3 1pc
4
5
Electrostatic
Warranty Card
User Guide 1pc
Amplifier
Technical Data
1pc
05
Loading...