HIFIBERRY RPI HB DAC+ DSP Datasheet

HiFiBerry DAC+ DSP

The HiFiBerry DAC+ DSP is a high-resolution digital-to-analog converter for the Raspberry Pi (newer models

with 40 pin GPIO connector). In combines a Burr-Brown DAC used on the HiFiBerry DAC with digital input

and output and also comes with a powerful digital signal processor.

Facts

• Stereo analog output (sample rates up to 192kHz/24bit)

• Stereo digital input and output (input up to 96kHz, output up to 192kHz)

• 300 MHz Digital Signal Processor (6144 instructions per sample incl. FFT and FIR accelerators)

• High quality asynchronous sample rate converter that can upsample/downsample/mix audio sources

• Onboard EEPROM allows to board to boot and run even without the Raspberry Pi

• Users can upload programs developed with Analog's SigmaStudio

size without package 5.5 x 6.5 x 2.0 cm

size including package 9.5 x 7.5 x 2.5 cm

weight 0.02 kg

GTIN

4260439550576

Usage recommendations

• Standalone DSC with the possibility of DSP adjustments

• Up- and downsampling of music sources

• room equalisation

• connection of external I2S DAC

• different use cases using DSP programs, e.g. loudness functions or filters

For inquiries outside the US please
contact:

HiFiBerry Germany
Anne Matuschek
[e-mail]

For inquiries in the US please contact:

HiFiBerry LLC
Robert Kreisler

[e-mail]