HiFiBerry DAC+ standard RCA User Manual

HiFiBerry DAC+ standard RCA

The HiFiBerry DAC+ standard is a high-resolution digital-to-analog converter for the Raspberry Pi (newer

models with 40 pin GPIO connector). This is a special sound card for the Raspberry Pi, optimized for one

specific use case: the best audio playback quality.

Facts

• Dedicated 192kHz/24bit high-quality Burr-Brown DAC with external low-jitter clock for best sound

quality.

• Hardware volume control. You can control the output volume using “alsamixer” or any application

that supports ALSA mixer controls.

• Connects directly to the Raspberry Pi, no additional cables needed

• No soldering, comes as a pre-fabricated kit. You just plug it onto the Raspberry Pi, it is conform to

the Raspberry Pi hardware-attached-on-top (HAT) specification.

• Compatible with Raspberry Pi models A+, B+ and 2B

• Directly powered from the Raspberry Pi, no additional power supply

• Ultra-low-noise voltage regulator for optimal audio performance

• Comes with all components required to mount it. We include 4 M2.5x12mm spacers to fix the board

onto the Raspberry Pi.

size without package 5.5 x 6.5 x 2.0 cm

size including package 9.5 x 7.5 x 2.5 cm

weight 0.02 kg

GTIN

4260439550057

Usage recommendations

• small and elegant high quality music playback devices

• home automation and multi-room audio systems

Modul 9 GmbH Bachmattrasse 14, CH-8932 Mettmenstetten

[e-mail]

www.hifiberry.com