HID Global RB25F Operators Guide

hidglobal.co

An ASSA ABLOY Group brand

5.

INSTALLATION GUIDE

www.hidglobal.com/plt-04027



Scan the QR code or visit the link to see

the multi-language electronic version of
this document.





Lisez le code QR ou suivez le lien

pour consulter la version française
de ce document.





Escanee el código QR o visite el

vínculo para consultar la versión en
Español de este documento.





Scannen Sie den QR-Code oder

öffnen Sie den Link für die
deutsche Version dieses
Dokuments.



 Faça a leitura do código QR ou

acesse o link da versão em
português deste documento.Etc



Scansiona il codice QR o visita il
link della versione Italiana di
questo documento.



Отсканируйте QR-код или пройдите по
ссылке, чтобы получить версию этого
документа на русском языке.



扫描

QR

码或访 问此文 档的中 文

版

本的 链接。

 この文書の日本語版を表示するには、

QR コードをスキャンするか、リンク
を クリックします。

 QR 코드를 스캔하거나 링크를

방문하면 이 문서의 한국어 버전을 볼
수 있습니다.

Supplied parts

 Eureka Biometric Reader / Controller
 Installation Guide
 Self-tapping screw for locking the

reader to its baseplate.

 Scan the QR code or visit the link to see

the multi-language electronic version of
this document.





Recommended parts (not supplied)

 Cable, 5-9 conductor (Wiegand or

Clock-and-Data), 4 conductor
Twisted Pair Over-All Shield and UL
Approved Belden3107A or
equivalent (OSDP)

 Drill with various bits for mounting

hardware.

 Mounting hardware
 Certified DC power supply
 Metal or planstic junction box

Optional Features

Open Collector Output – Controls and external device (5VDC) operating in Host
Mode only. Sink 40 mA / Source -1mA.

Optical Tamper (enabled by default?) – This can be configured with HID
Biometric Manager. If activated, when the reader is removed from its mounted
base, the optical tamper will sink to ground from its default 5 VDC. Contact HID
Technical Support for Optical Tamper options.

Relay output – Typically used to control a strike lock, three contacts (common,
normally open and normally closed) are available on the pigtail bundle. Relay
operation may be configured with HID Biometric Manager.

Wiegand Reader Interface – this includes a hold input, which may configured
with HID Biometric Manager.

© 2018 HID Global Corporation/ASSA ABLOY AB. All rights
reserved. HID, the HID Brick logo, the Chain Design, and ICLASS
SE are trademarks or registered trademarks of HID Global, ASSA
ABLOY AB, or its affiliate(s) in the US and other countries and
may not be used without permission. All other trademarks,
service marks, and products or service names are
trademarks or registered of all their respective owners.

18” 18”

Function Group

Wire Colour

Function

AWG Max Length

RS-485

Red/Green

RS-485 A

22

1000 m

Tan RS-485 B

Black RS-485 Ground

Relay

White/Grey

Relay – Common

22

150 m

White/Yellow

Relay – Normally Open

White/Red

Relay – Normally Closed

Inputs

Pink REX Input /

TTL

Output

Grey DPS Input/

TTL

Output

Black IO Ground

Wiegand Reader*

White Wiegand D0

Green

Wiegand D1

Brown Wiegand RED

Orange

Wiegand Green

Yellow Wiegand BUZ

Blue Wiegand Hold

Violet Wiegand TPR

Black Wiegand Ground

DC Power

Red Power +12V

Black Power Ground

Network

Connector

Function

Max Length

RJ45 socket

Ethernet

100 m (CAT6)

hidglobal.co

An ASSA ABLOY Group brand

Specifications

Input Voltage

Current

1

2 3

Operating

Temperature

Standby AVG

Max AVG

Peak

TBD TBD

TBD TBD

-30°F to 150 ˚F

(-35°C to 65°C)

1

Standby AVG - RMS current draw without a card in the RF field.

2

Maximum AVG - RMS current draw during continuous card reads. Not evaluated by UL.

3

Peak - highest instantaneous current draw during RF communication.

(Wiegand Cable STANDBY AVG 46 mA, MAX AVG 62.5 mA, PEAK 250 mA)

Regulatory
UL

Connect only to a Listed Access Control / Burglary power-limited power supply. These
readers are intended to be used with listed (UL294) control equipment. Suitable for outdoor
use. Only Wiegand and Bluetooth communications have been evaluated by UL.
Install in accordance with NFPA70 (NEC) Local Codes, and authorities having jurisdiction.
Follow all National and Local Codes.

UL 294 Performance Levels

Access Control

Line Secutity

Level

Destructive

Attack Level

Endurance

Level

Stand-by

Pwer Level

Conditions

Level I

Level I

Level IV Level I

FCC

This device complies with part 15, subpart C, of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this
device must

accept any interference received, including interference that may cause
undesired operation. These limits are designed to provide reasonable protection against
harmful interference. This equipment generate, uses and can radiate RF energy and if not
installed and used in accordance with instruction, may cause harmful interference. Possible
solution include: relocate the device, increase separation between equipment, power
equipment separately, consult with your dealer.

CAUTION: Any changes or modifications
to this device not explicitly approved by HID Global could void your authority to
operate this equipment.

Canada Radio Certification

This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil

ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le

fonctionnement.

CE Marking

HID Global hereby declares that these proximity readers are in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU. Por el presente, HID
Global declara que estos lectores de proximidad cumplen con los requisites esenciales y otras
disposiciones relevantes de la Directiva 2014/53/EU. HID Global déclare par la présente que
ces lecteurs à proximité sont conformes aux exigences essentielles et aux autres stipulations
pertinentes de la Directive 2014/53/EU. A HID Global, por meio deste, declara que estes
leitores de proximidade estão em conformidade com as exigências essenciais e outras
condições da diretiva 2014/53/EU. HID Global bestätigt hiermit, dass die Leser die
wesentlichen Anforderungen und anderen relevanten Bestimmungen der Ric htlinie
2014/53/EU erfüllen. HID Global dichiara che i lettori di prossimità sono conformi ai requisiti
essenziali e ad alter misure rilevanti come previsto dalla Direttiva europea 2014/53/EU.
Download copies of the Radio Equipment Directive (RED) Declaration of Conformity (DoC)
at: http://www.hidglobal.com/certifications

Taiwan

According to ‘‘Administrative Regulations on Low Power Radio Waves Radiated Devices’’

Without permission granted by the NCC, any company, enterprise, or user is not allowed to
change frequency, enhance transmitting power or alter original characteristic as well as
performance to an approved low power radio-frequency device. The low power
radiofrequency devices shall not influence aircraft security and interfere legal
communications; If found, the user shall cease operating immediately until no interference is
achieved. The said legal communications means radio communications is operated in
compliance with the Telecommunications Act. The low power radio-frequency devices must
be susceptible with the interference from legal communications or ISM radio wave radiated
devices.

Korean KCC

Russia EAC

Дата изготовления указана на маркировке оборудования

Представитель в Российской Федерации

0.762 mm

ООО «Дофин»

Адрес

140573, РФ, Московская обл., Озерский район, с. Бояркино

Контактное лицо

Л.Н. Голубова

Телефон

[phone]

e-mail [e-mail]

Japan MIC

“ この装置は総務省の型式指定を受けています。”
(総務省指定番号は第AC-ｘｘｘｘｘ号です)

本製品は電波を使用したRFID 機器の読み取り・書き込み装置です。
そのため使用する用途・場所によっては、医療機器に影響を与える恐れがあります

Japan Giteki for BLE

NotoSansCJKjp-Regular

Israel (Mobile Ready RP10)

במכשיר הינו על בסיס ״משני״ ופטור מרשיון הפעלה אלחוטיהשימוש.

הלקוח פטור מרשיון הפעלה אלחוטי,רק ״בפעולת בזק״ לשימוש עצמי של הלקוח בלבד.

ולא לעשות בו כל שינוי טכני אחר,אסור להחליף את האנטנה המקורית של המכשיר.

Brazil

Compliance Statement

Este produto está homologado pela ANATEL, de acordo com os procedimentos
regulamentados pela Resolução 242/2000, e atende aos requisitos técnicos
aplicados. Para maiores informações, consulte o site da ANATEL ­www.anatel.gov.br
This product is homologated at ANATEL according to procedure regulated by
Resolution 242/2000, and it complies with the applicable technical
requirements. For more information, consult ANATEL website ­www.anatel.gov.br

RF Warning Statement

Per Article 6 of Resolution 506, equipment of restricted radiation must carry the
following statement in a visible location:
Este equipamento opera em caráter secundário, isto é, não tem direito a
proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e
não pode causar interferência a sistemas operando em caráter primário. This
equipment operates in secondary character, meaning it does not have the right
of protection against harmful interference, even against those the same
character,

RBN25GNK

항목

규격

송신주파수 RFID:13.56 MHz, BLE 2.4 -2.48GHz

수신주파수 RFID:13.56 MHz, BLE 2.4 -2.48GHz

출력

RFID: 10m

에서

47.544mv이하

전원

DC 12.0V

전파형식

A1D

발진방식

X-tal

변조방식

RFID: ASK, NFC: GFSK

HID Global

Americas & Corporate

611 Center Ridge Drive
Austin, TX 78758
USA
Support: 866-607-7339
Fax: [phone]

Asia Pacific

19/F 625 King's Road
North Point, Island East
Hong Kong
Support: 852-3160-9833
Fax: [phone]

Europe, Middle East & Africa

Phoenix Road
Haverhill, Suffolk CB9 7AE
England
Support: 44 (0) 1440 711 822
Fax: [phone]

Brazil

Condomínio Business Center
Av. Ermano Marchetti, 1435
Galpão A2 - CEP 05038-001
Lapa - São Paulo / SP
Brazil
Phone: [phone]

PLTRev. A.0