HID Global OK5127CKMINI User Manual

Download

Page 1

Europe, Middle East & Africa

Installation Guide

OMNIKEY

Smart Card Readers

3121-906-ENEN, B.5

eBase Models: 1021, 3021, 3121, 4040, 4121, 4321,

5021, 5025, 5121, 5125, 5127, 5127CK Mini, 5321, 5325, 5326, 5421, 5427, 6121, 6221, 6321

Drivers and Manuals:

www.hidglobal.com/omnikey

North America & Corporate

611 Center Ridge Drive

Austin, TX 78753 USA

Phoenix Road Haverhill, Suffolk CB9 7AE England

Asia Pacific

19/F 625 King’s Road North Point, Island East Hong Kong

support.hidglobal.com

Page 2

OMNIKEY Smart Card Reader Installation Guide

Introduction

This guide describes physical behavior and conformities of the OMNIKEY Smart Card Readers.

1021 USB - Desktop smart card reader in a small form factor for desktop and mobile usage.

3021 USB - High-performance smart card reader, with a USB interface and small form factor for

desktop and mobile usage.

3121 USB - High-performance smart card reader for desktop use with multiple standing base options in a robust housing.

4040 Mobile PCMCIA - High-performance smart card reader for mobile use in laptops and PDAs with PCMCIA interface.

4121 CL - Mobile ExpressCard 34mm - Contactless Reader with ExpressCard® interface for Laptops and mobile devices that reads/writes to 13.56 MHz smart cards.

4321 Mobile ExpressCard 54 - High-performance smart card reader for mobile use in laptops and mobile devices with the ExpressCard interface.

5125 / 5325 USB Prox - Dual interface PC-linked reader that reads contactless (125kHz) HID Prox cards and reads/writes virtually any contact smart card.

5121 / 5321 / 5421 USB - Dual interface PC-linked reader that reads/writes to 13.56 MHz contactless cards and virtually any contact smart card.

5127 / 5427 CK/ 5427 UE USB - Contactless 13.56MHz/125kHz reader with CCID/Keyboard wedge interface.

5021 / 5321 CL USB - Contactless Reader with USB interface for desktop use that reads/writes to

13.56 MHz smart cards.

5025 CL USB - Contactless Reader with USB CCID-compliant interface for desktop use that reads contactless (125 kHz) Prox cards.

5321 CL SAM USB - Dual interface PC-linked reader that reads/writes to 13.56 MHz contactless cards and virtually any SIM-sized contact smart card.

5326 DFR USB - Contactless Dual Frequency (13.56MHz/125kHz) Reader with CCID interface.

6121 Mobile USB - Dongle-sized smart card reader for SIM-sized smart cards, especially well

suited for use with mobile devices.

6221 USB - Dongle-sized reader for SIM-sized smart cards and Micro-SD cards, especially well suited for use with mobile devices.

6321 Mobile USB - Dongle-sized Dual interface PC linked reader that reads/writes to 13.56 MHz contactless smart card and virtually any SIM-sized contact smart card.

Parts

• Smart Card Reader

• Installation Guide

Find drivers, reader documentation supporting various operating systems at

http://www.hidglobal.com/omnikey.

See the application note for card loading and handling instructions at

http://www.hidglobal.com/omnikey.

Page 3

Installation Guide OMNIKEY Smart Card Reader

Operating Temperature

0°- 55° C / 32°- 131° F

150 cm / 59.1 in - Models 1021, 3021

180 cm / 70.9 in - Other Models

Mean Time Between Failures (MTBF)

500,000 Hours

Host Interfac e

USB 2.0 CCID (USB 1.1 Compatible)

Host Data Transmission Speed

12 Mbps (USB 2.0 Full Speed)

Power Supply

Bus Powered

4321

4121 CL

4040

Operating Temperature

0°- 55° C / 32°- 131° F

Mean Time Between Failures (MTBF)

500,000 Hours

ExpressCard

54mm

Host Data Transmission Speed

12 Mbps

16 Mbps

Power Supply

Bus Powered

PCMCIA

Specifications and Installation

For further information, contact HID support: http://support.hidglobal.com/. For driver setup, consult the OMNIKEY Smart Card User Guide.

CAUTION: Install the drivers prior to attaching the OMNIKEY reader with the computer.

ATTENT ON: Vous devez installer le driver avant de connecter le lecteur OMNIKEY à l'ordinateur.

USB Connected Reader Specifications

PC Connector Cable

200 cm / 78.7 in - Models 5021, 5025 CL, 5421, 5427 CK

USB Connected Reader Installation

1. Connect the reader with computer; plug the USB connector into your computer’s USB port.

2. When the reader is operational, the LED illuminates.

3. For contactless operation, hold the card next to the reader logo. For contact smart cards, insert the card into the reader with contacts facing up.

4. When the reader is exchanging data with a card (reading/writing), the LED blinks.

PCMCIA and ExpressCard Reader Specifications

Host Interfac e

ExpressCard 34mm PCMCIA

PCMCIA and ExpressCard Reader Installation

1. Insert the reader into the compatible interface slot of your Notebook or mobile device.

2. If the reader is operational, observe the reader in your operating system’s Device Manager.

3. For contactless operation, hold the card next to the logo on the reader. For contact smart cards, insert the card into the reader with contacts facing up.

Page 4

OMNIKEY Smart Card Reader Installation Guide

Regulatory

CAUTION: Any changes or modiﬁcations to this device not explicitly approv ed by manufacturer could void your authority to operate this equipment.

ATTENTION: Tout changement ou modification de cet appareil sans approbation explicite du manufact urer vous enlève les droits d'usage de cet équipement

FCC (All Readers) This device compli es with part 15 of the FCC Rul es. Operation is subject to the foll owing two conditions: ( 1) This device

may not cause harmful interference, and (2) this device must acc ept any interference received, incl uding interference that may cause undesired operat ion.

Product Radio Certifications

The OMNIKEY 5127CK MINI M odule was tested under the FCC rules and Industry C anada rules for a Modular Approval and therefore the f ollowing shall appl y: (reference below FCC/IC ID’s)

• Provided that the Antenna and tuning network hav e not been changed in any way, the Final Product label may contain the HIID Global FCC ID. Provi ded no other radio devices exist within the final assembly. The end integrator may use these ID’s, as long at the origi nal HID Global Label is visible.

• FCC ID: JQ6-OK5127CKMINI or IC ID: 2236B-OK5127CKMINI

• The End User/Manufacturer, will not need to repeat the intentional emissions testing (act ual radio

certification), however the un-int entional emissions testing will need to meet the FCC and IC requirem ents with the module installed into the final assembl y or product. This also applies to CE Marking as defined by the R&TTE Directive.

• However, in many cases, the module may need to be retuned, due to t he effects of the product enclosure and assemblies within this enclosure, and the de-t uning affect that this may have on the radio circuitry. In thi s case and if other radios exist, Class 2 Permissiv e Change is required.

• In the event that the HID OEM modules Kit is modified in any way, the radi o transmitter operating at either 125 kHz, 13.56 MHz and Bluetooth, when the module is integrat ed into the OEM’s final product, Radio Certification is requi red for the final product.

• Obtain FCC Certification by submitting t he final product to a Telecommunications Certified Body (TCB ) laboratory that performs the testing and issue the FCC Grant . Standard: Part 15, Subpart C.

• Often the same TCB tests to Canada requirements and grants cert ification as a Certification Body (CB). Standard: RSS-210, RSS-GEN and RSS-310, where applicable.

• The same laboratory may also be an EU Communications Assessment Body (CAB) that is accredited to test to R&TTE Directive requirements for CE Marking. A pplicable standards: EN 300 330, EN 301 489-3, E N 50130-4, and IEC60950.

• A laboratory that is a CAB testing to R&TTE Directive requirem ents will also be testing to Australia and New Zealand requirements because of a common test standard. Standard: AS/NZS 4268.

• Asian country certifications are obtai ned on an individual country basis.

OEM Final Product US Dept. of Commerce Bureau of Industry and Security (BIS) approval is required for USA based companies who export and r e-export products using encryption. Regulatory Compli ance Assistance - HID Global provides technical as sistance and laborat ory recommendations, as required.

CAUTION: Any changes or modifications to this devise not explicitly approved by the manufacturer could void your authority to operate this equipment.

Page 5

Installation Guide OMNIKEY Smart Card Reader

。

항목

규격

송신주파수

RFID:13.56 M Hz

수신주파수

RFID:13.56 M Hz

RFID: 10m에서 24.19mv

DC 5

전파형식

A1D

X-tal

Canada Radio Cert ification (All Readers)

This device compli es with Industry Canad a license-exempt RSS standard(s). Operation i s subject to the following two conditions: (1) This d evice may not cause interference, and (2) t his device must accept any interferenc e, including interference that may cause undesired operation of the dev ice. Le present appareil est conf orme aux CNR d'Industrie Canada applicable aux apparei ls radio exempts de licence. L'exploitati on est autorisée aux deux condit ions suivantes: (1) l'appareil ne doit pas produire de bro uillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, meme si le brouill age est susceptible d'e n compromettre le fonctionnement .

CE Marking (All Read ers)

HID Global hereby declar es that these proximity readers are in com pliance with the essential requirem ents and other relevant provision s of Directive 1999/5/EC. Por el presente, HID Gl obal declara que estos lectores de prox imidad cumplen con los requisitos esencial es y otras disposiciones relev antes de la Directiva 1999/5/EC. HID Global déclare par l a présente que ces lecteurs à proximit é sont conformes aux ex igences essentielles et aux autres stipulations perti nentes de la Directive 1999/5/CE. A HID Global, por mei o deste, declara que este s leitores de proximidade estão em conf ormidade com as exigências essenciais e outras con dições da diretiva 1999/5/EC. HID Global bestätigt hiermit, dass die Leser die wesentlichen Anf orderungen und anderen relevanten Besti mmungen der Richtlinie 1999/5/E G erfüllen. HID Global dichi ara che i lettori di prossimità sono conformi ai requisiti essenziali e ad altre misure ri levanti come previsto dalla Direttiv a europea 1999/5/EC. Download copies of t he R&TTE Declaration of Conformity (DoC) at ht tp://www.hidglobal .com/certifications.

Taiwan (Readers 5321 and 5421)

經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

According to “Admi nistrative Regulations on Low Power Radio W aves Radiated Devices” Without permi ssion granted by the NCC, any company, enter prise, or user is not allowed to change f requency, enhance transmitting power or al ter original characteristic as well as perform ance to an approved low power radio-frequency devi ces shall not influence aircraft security and interfere legal communications; If found, the user shal l cease operating immediately until no interference is achieved. The said legal comm unications means radio communications is oper ated in compliance with the Telecomm unications Act.

The low power radio-frequenc y devices must be susceptible with the i nterference from legal communicati ons or ISM radio wave radiated devi ces.

Singapore (Readers 5427 CK)

Japan MIC (Reader 4121)

この装置は総務省の型式指定を受けています。本製品は電波を使用したRFID機器の読み取り・書き込み装置です。そのため使用する用途・場所によっては、医療機器に影響を与える恐れがあります

Korean KC (Readers 1021, 3121, 4040, 4321, 5021, 5325, 5326, 5421, 5427, 6121, 6221, 6321)

출력

전원

발진방식

변조방식 AM

이하