HID Global IDENTICLASSB User Manual

15370 Barranca Parkway Irvine, CA 92618

identiCLASS®

Developer Tool Kit

USER GUIDE

June 28, 2010

Document ID: 3034-902 Rev 3.0

HID GLOBAL CONFIDENTIAL AND PROPRIETARY INFORMATION. This document contains confidential and proprietary information, which may not be duplicated, published, disseminated or disclosed to unintended third party recipients or used for any purpose, without written permission from HID Global Corporation. If you are an unintended recipient of this proprietary information or are unwilling to accept the above restrictions, please immediately return this document to HID Global Corporation, 15370 Barranca Parkway, Irvine, CA 92618.

identiCLASS Developer Tool Kit User Guide

Page 2 of 26 June 3, 2010

HID GLOBAL CONFIDENTIAL AND PROPRIETARY INFORMATION. Use and disclosure of this information is strictly restricted by the terms of a non-disclosure agreement with HID Global Corporation. If you have received this information and are not an intended recipient or are not subject to or do not agree to be bound by the terms of the non-disclosure agreement, please immediately return this document to HID Global Corporation, 15370 Barranca Pkwy, Irvine, CA 92618-3106.

Date

Author

Description

Document Version

June 29, 2010

IRC

Updated mechanical drawings & changed antenna caqble length to 10cm

Rev 3.0

June 25, 2010

IRC

Final edits, refined deliverables, document ID added, final mechanical drawings

Rev 2.0 6/03/10

JM

Third Draft

Rev 1.2

5/26/10

JM

Second Draft

Rev 1.1

5/14/10

JM

Initial Draft

Rev 1.0

Copyright / Trademarks

HID Global Corporation in the U.S. and other countries.

Version History

Contents

1 Overview ......................................................................................................................................... 3

2 What’s in the Box ........................................................................................................................... 4

3 Choosing the components you need ........................................................................................... 5

4 Example Configurations ................................................................................................................ 8

5 identiCLASS configuration, setup and testing ......................................................................... 11

6 Integrating identiCLASS with your equipment ......................................................................... 13

7 Mechanical Specifications .......................................................................................................... 14

8 Configuration ................................................................................................................................ 20

9 Regulatory .................................................................................................................................... 22

Appendices ................................................................................................................................................ 25

Contact ....................................................................................................................................................... 26

June 28, 2010 Page 3 of 26

HID GLOBAL CONFIDENTIAL AND PROPRIETARY INFORMATION. Use and disclosure of this information is strictly restricted by the terms of a non-disclosure agreement with HID Global Corporation. If you have received this information and are not an intended recipient or are not subject to or do not agree to be bound by the terms of the non-disclosure agreement, please immediately return this document to HID Global Corporation, 15370 Barranca Pkwy, Irvine, CA 92618-3106.

identiCLASS Developer Tool Kit User Guide

1 Overview

Source

Description

HID

identiCLASS Quick Start Guide

HID

identiCLASS Product Data Sheet

HID

identiCLASS Software Configuration Tool User Guide

HID

identiCLASS Software Developer Guide

1.1 Introduction

identiCLASS is a universal e-Government reader platform designed for integration into OEM equipment which provides contact or contactless reading of electronic documents, for example, Electronic Passports, Electronic National ID Cards, Electronic Driver‟s Licences.

The identiCLASS Developer Tool Kit contains everything a customer needs to integrate identiCLASS into their systems, including two types of Reader Board: a small footprint board for space-restricted or mobile devices using an external antenna, and a larger board with built-in antenna for terminals, as well all the accessories such as cables, drivers and software that will be needed to complete the task.

1.2 This Guide

This guide describes:

The components supplied in your identiCLASS Developer Tool Kit. How to choose the components you need for your application and example

configurations. How to connect the components which you will be using. How to integrate the identiCLASS reader with your equipment, including tips on

installation Board dimensions, mounting dimensions, etc. Using the Software Configuration Tool to configure parameters within the

identiCLASS reader.

1.3 Related Documents

1.4 Ordering

See the identiCLASS How to Order Guide.

1.5 RFID Standards Supported

The following RFID standards are supported with identiCLASS, ISO 14443A, ISO 14443B, ISO15693

Page 4 of 26 June 3, 2010

HID GLOBAL CONFIDENTIAL AND PROPRIETARY INFORMATION. Use and disclosure of this information is strictly restricted by the terms of a non-disclosure agreement with HID Global Corporation. If you have received this information and are not an intended recipient or are not subject to or do not agree to be bound by the terms of the non-disclosure agreement, please immediately return this document to HID Global Corporation, 15370 Barranca Pkwy, Irvine, CA 92618-3106.

identiCLASS Developer Tool Kit User Guide

2 What’s in the Box

Layer 1

sample e-passport (A) one sample dual-interface card (ID card) (B) one USB memory stick containing drivers, software, documentation,

release notes etc (C)

Layer 2

identiCLASS 3300 Reader Core (A) identiCLASS smart card adapter – full card size (B) identiCLASS smart card adapter – SIM card size (C) 15cm smartcard adapter cable (D) Slots (E) & (F) are not populated

Layer 3

identiCLASS 3500 Reader Board (A) identiCLASS ID1 antenna (B) identiCLASS ID3 antenna (C) 10cm antenna cable (D)

Layer 4

USB cable

The box is divided into four layers: this section tells you what should be in each layer, starting with Layer 1 at the top.

*Not included in the current version of the Developer Tool Kit – will become available at a later date.

June 28, 2010 Page 5 of 26

HID GLOBAL CONFIDENTIAL AND PROPRIETARY INFORMATION. Use and disclosure of this information is strictly restricted by the terms of a non-disclosure agreement with HID Global Corporation. If you have received this information and are not an intended recipient or are not subject to or do not agree to be bound by the terms of the non-disclosure agreement, please immediately return this document to HID Global Corporation, 15370 Barranca Pkwy, Irvine, CA 92618-3106.

identiCLASS Developer Tool Kit User Guide

3 Choosing the components you need

3.1 3500 Reader Board

The identiCLASS 3500 Reader Board has:

One internal antenna connections to one or two external antennas internal SAM socket USB connection FCC modular approval is planned for release in late 2010. See identiCLASS

microsite at www.hidglobal.com/main/identiclass for the latest information.

The 3500 Reader Board will read contactless cards/passports using its built-in antenna. It can be connected to one or two external antennas, either large (ID3) or small (ID1) see Example Configurations. The 3500 Reader Board is capable of reading ID0 credentials via its built-in SAM socket.

3.2 3300 Reader Core

Page 6 of 26 June 3, 2010

HID GLOBAL CONFIDENTIAL AND PROPRIETARY INFORMATION. Use and disclosure of this information is strictly restricted by the terms of a non-disclosure agreement with HID Global Corporation. If you have received this information and are not an intended recipient or are not subject to or do not agree to be bound by the terms of the non-disclosure agreement, please immediately return this document to HID Global Corporation, 15370 Barranca Pkwy, Irvine, CA 92618-3106.

identiCLASS Developer Tool Kit User Guide

The identiCLASS 3300 reader core has:

one connection to an external antenna one connection to a smart card adapter USB connection small size for use in mobile / hand-held devices

The 3300 Reader Core will read contactless cards/passports using an external antenna, either large (ID3) or small (ID1). It can be connected to an external smart card adapter which enables it to read either full-size contact cards or SIM-size contact cards, see Example Configurations. It can be used with both a contactless antenna and a contact smart card adapter at the same time.

3.3 ID1 Small Antenna

The identiCLASS ID1 small antenna provides reading of contactless passports/credentials. It can be connected to the identiCLASS 3500 Reader Board or to the identiCLASS 3300 Reader Core. It may be used on its own, or mounted next to another antenna to enable reading of contactless cards/passports in whichever orientation they are presented, see Example Configurations.

3.4 ID3 Large Antenna

The identiCLASS ID3 large antenna provides reading of contactless passports/credentials. It can be connected to the identiCLASS 3500 Reader Board or to the identiCLASS 3300 Reader Core. Its large window enables an optical reader to be mounted in the centre. It may be used on

June 28, 2010 Page 7 of 26

HID GLOBAL CONFIDENTIAL AND PROPRIETARY INFORMATION. Use and disclosure of this information is strictly restricted by the terms of a non-disclosure agreement with HID Global Corporation. If you have received this information and are not an intended recipient or are not subject to or do not agree to be bound by the terms of the non-disclosure agreement, please immediately return this document to HID Global Corporation, 15370 Barranca Pkwy, Irvine, CA 92618-3106.

identiCLASS Developer Tool Kit User Guide

its own, or mounted next to another antenna to enable reading of contactless passports/credentials in whichever orientation they are presented, see Example Configurations.

3.5 Full-size Smart Card Adapter

The identiCLASS full-size smart card adapter provides reading of contact cards using an ISO 7816 compliant interface. It can be connected to the identiCLASS 3300 Reader Core, see Example Configurations.

3.6 ID0 Smart Card Adapter

The identiCLASS SIM-size smart card adapter reads ID0 credentials via its built-in SAM socket. It can be connected to the identiCLASS 3300 Reader Core, see Example Configurations.

Page 8 of 26 June 3, 2010

HID GLOBAL CONFIDENTIAL AND PROPRIETARY INFORMATION. Use and disclosure of this information is strictly restricted by the terms of a non-disclosure agreement with HID Global Corporation. If you have received this information and are not an intended recipient or are not subject to or do not agree to be bound by the terms of the non-disclosure agreement, please immediately return this document to HID Global Corporation, 15370 Barranca Pkwy, Irvine, CA 92618-3106.

identiCLASS Developer Tool Kit User Guide

4 Example Configurations

4.1 Stand-alone 3500 Reader Board

The simplest layout is the 3500 Reader Board on its own, using its built-in antenna:

The USB connection is used to configure the Reader Board, and to receive data from the Reader Board when it reads a card. Power is provided from the USB cable.

4.2 3500 Reader Board and external small antenna

Connect the ID1 antenna to one of the external antenna connectors on the 3500 Reader Board using the supplied cable (4091A01 10cm):

This layout provides two antennas adjacent to each other, so a passport can be presented in any orientation and it will still be read. This is achieved via an antenna switching circuit which turns off the unused antenna once the chip in the credential is detected by one of the antennas.