Hide-a-Hose Central vacuum system User Manual
OWNER’S MANUAL
Important Safety Instructions
Read all instructions before using your
Built-in Vacuum Cleaning System.
WARNING - To reduce the risk of fire,
electrical shock or injury:
• Disconnect power units electrical
plug before servicing.
• Do not use outdoors or on wet
surfaces.
• Do not allow to be used as a toy.
Close attention is necessary when
used by or near children.
• Use only as described in this
manual. Use only manufacturer’s
recommended attachments.
• Do not handle hose, outlets, or
unit with wet hands.
• Keep hair, loose clothing, fingers,
and all parts of the body away
from the openings and moving
parts.
• Do not pick up anything that
is burning or smoking, such as
cigarettes, matches, or hot ashes.
• Do not use without dust bag and/or
filters in place, if required by power
unit.
• Use extra care when cleaning on
stairs.
• Do not use to pick up flammable
or combustible liquids such as
gasoline or use in areas where they
may be present
• Do not store flammable or
combustible product within three
(3) feet of power unit.
SAVE THESE INSTRUCTIONS!
TO OPERATE:
1
Open the
door and
pull out the
amount of
hose you
need.
2 ways to turn
the vacuum on:
Option 1 - Use
the low voltage
switch at the
inlet.
3
(Note: You will feel the hose stop when you get to the
end. If the hose comes completely out of the wall, simply
reinsert the hose several inches back into the inlet.)
Place the
locking
2
(Note: The locking mechanism prevents the hose
from retracting while you vacuum.)
TO RETRACT THE HOSE:
With the power
unit still on, bring
1
the hose back to
the area near the
inlet valve.
mechanism
into the
locked
position.
4
Option 2 - Use the
RF handle. Hold the
switch in the “on”
position until you
hear the vacuum,
and/or air flow. Then
let go of the switch.
Attach
appropriate
4
Regulate the retraction
speed of the hose by placing
the palm of your hand over
the end of the hose, until it
retracts itself completely into
the valve.
cleaning tools
and vacuum.
2
3
Leave the
vacuum
running and
disconnect
the handle.
Move the
locking
mechanism to
the unlocked
position.
5
Turn the system off after the hose
is returned completely into the
valve. If you turn the
unit on with the RF
handle, you must turn
the unit off with the
RF handle. If you turn
the unit on with the
low voltage switch,
you must turn the
unit off with the
low voltage switch.
Close
the
6
door.
Loading...