Hidden M356942 User Manual

Hidden Video Recording

System Manual

Patent No. M356942

P/N: F40072B00

Thank you for purchasing our Hidden Video Recorder System.
Please read this manual before installation.

For customer support

keep your Invoice for further support.

Do not open/modify

damage to the unit. For internal repairs, consult your
dealer or an Authorized Service Center.

Do not use

with the unit; otherwise, it would be out of warranty.

Protect from humidity.

be careful to protect it from rain, sea water, or high
humidity environment etc.

Protect from high temperatures

To avoid damage or mis-operation of the device,
only use in temperature of 0 ~ +40°C.

, please contact your dealer, and please

the device, as it may cause

any accessories other than what comes

Do not put it in water and

Do not bring

cold place, or vice versa. This may cause damaged
to the inside of the unit by creating condensation.

EU Environmental Protection

The symbol of crossed-out garbage shows that this
product should not be treated as household waste,
and it falls into the category of electric /electronic
equipment for recycling. This electronic device
should not be disposed in a regular trash. We
strongly advice you to contact related authorization
before you dispose this product.

the device suddenly from a hot to a

- 1 -

Contents

Package Contains ............................................................. 3

Quick Setup....................................................................... 4

How to open 2nd Generation Black Box ........................... 4

Instruction.......................................................................... 4

Installation ......................................................................... 5

1. How to open battery cover ..................................... 5

2. How to insert/ draw out Micro SD card ................... 5

3. How to open camera cover .................................... 5

4. How to change camera angle ................................ 6

5. How to install the bracket ....................................... 8

6. How to charge the battery ...................................... 8

7. IR Remote control sensing area ............................. 8

Default Value..................................................................... 9

Start to record ................................................................... 9

Playback Function ............................................................. 9

Remote Control Diagram ................................................ 10

Screen Icons ................................................................... 11

LED status....................................................................... 12

Recording Duration ......................................................... 12

The most frequent use and important functions .............. 13

FAQ ................................................................................. 15

Specifications .................................................................. 16

- 2 -

Package Contains

nd

Generation Black Box

2

Power adapter (12VDC)

Micro SD Card reader

AV Output cable

(optional)

Micro SD card

(optional)

IR remote control

Bracket

User manual

3.7V 4800mA Li-polymer
battery

Charger cradle for Li-polymer

battery (optional)

- 3 -

Quick Setup

Step 1: Open the back cover
Step 2: Fully charge the battery for 10 hours for the first time

using (please backup or format Micro SD card
regularly to keep it efficient)

Step 3: Insert Micro SD card into Micro SD slot
Step 4: Set camera in the direction of your required

application

Step 5: Press “ON” (power switch) to turn on 2

Black Box. The LED will be on and buzzer will beep
around 2 seconds. To turn off 2

nd

Generation

nd

Generation Black
Box, press and hold “ON” for 5 seconds and let go, all
LEDs will be off.

*Set the DATE/TIME to current date and time before
recording; or the recording date and time will be incorrect.
*Use bundled accessories. Damage which is caused by other
device will be beyond warranty

How to open 2nd Generation Black Box

Instruction

- 4 -

Installation

1. How to open battery cover

Turn the device upside down.
Firstly open back cover and
then slide off the battery cover
according to the direction of
arrow (from two points to three
points)

2. How to insert/ draw out Micro SD card

* Always power off the unit before removing the Micro SD card,

otherwise, the card may be damaged.

* Never remove Micro SD card from your computer without using the

“Safely Remove Hardware” icon in your computer system tray.

3. How to open camera cover

After removing the battery
cover, take out the battery for
charging or changing the
battery. Please make sure of

the right direction when slide
battery back into place.

Firstly open the back cover of the
device. Insert micro SD card in the
slot. Never force the card into slot

& make sure the direction is
correct. Press micro SD card for

drawing out.

Insert any flat or sharp-pointed
stick into the slot to pull open the
camera cover.

- 5 -