Hicling GG0220 Users Manual
GPS Sport Watch
Quick Guide
1.Appearance Description
1 General Introduction for Cling Leap
Heart rate sensor
Return
Function
Wristband
Charging
2 Charging Method
The charging mode of the watch is magnetic charging. The charging socket is placed
on the metal point on the back of the watch to ensure that the magnet absorbs the
metal point.
Function
Return
(hold and press 8
seconds to restart)
3 Package List
1.Cling Leap x1 2.Charger x1
2.
Instructions
3.User manual x1
1 Fuction Interface
After the device is activated, the watch displays the default time interface and the
touch screen can switch around.
2.1 Function in daily mode
Time Exercise
186
12
18005
09/07
FRI
36
STEPS
12,685
DIST CALS
9825.68
12：34Activity
中级
70
Last Sports Record
12：34
Last Workout
KILOMETER
5.28
TIME
PACE
5’46”30:46
Heart Rate Weather
Weather
Heart Rate
78
HR-Zone Efficiency
/5 %
2
12：34
BPM
64
12：34
Rain
AQI
PM2.5
Good
34
2.2 Function in functional keys mode
In daily mode, click the “Function” key and enter the following interface:
Cycling
Running
12:36
138-1457-9874
Reject
2.3 Device information display:
In the case of device locked screen, the
physical key is used to unlock the device, and
then the return key is clicked to enter the
device information interface, which displays
the device's 4-bit Bluetooth code, firmware
version number, and the current residual
power.
GYM
Messages
John Smith：
Would you like to go
swimming together
tomorrow?
1 / 4
StopWacth
Message Music
1.54
72%
Find Phone
Bluetooth code
Firmware version
Residual power
12：34
Music 12：34
ClingFitness
2FDF
FindPhone PPG_BP
Sending alerts to your
phone...
2 Software Download
12:36
Scan QR Code to Install Cling APP
3 Activation And Connection
Enter the menu of Cling APP, click the activation entrance, select the appropriate
model according to the equipment purchased, match the device according to the
Bluetooth number displayed on the watch, click the corresponding model into the
connection until it reaches 100%, the binding is completed.
☆ Notice: IOS mobile phone pop-up "match" prompt, must be
allowed to match, Android mobile choose to cancel pairing.
4 Considerations
A. Make sure the Bluetooth on your phone is turned on;
B. Make sure the device is fully charged, turn on or charge before use .
C. Make sure the device is within 50cm of the phone when paired.
D. If Cling Leap shows a search failure under the Android system, please check the
phone preference settings to allow Cling to use the phone's Bluetooth. Android
system 6.0 or higher is required to operate GPS.
E. The Cling Leap waterproof rating is IP68, making it safe for use while swimming.
☆ Note: Due to expansion and contraction do not wear the Leap
during hot showers, baths, sauna etc.
3.Function Introduction
A. Blood Pressure Manual/Automatic
① Manual Detection
Before using the Blood Pressure Fluctuation detection feature it is essential that the
wearer calibrates the Cling App using a Sphygmomanometer. Enter the
Sphygmomanometer reading into the Cling App as your baseline. The Cling App
will go directly to the "Measuring" mode and calibrate itself. The screen display is a
_/_ . Once the calibration is completed the Blood Pressure reading will be shown
on the Leap screen until the next detection. Hold the Start key for approximately 20
seconds to complete a manual Blood Pressure Fluctuation reading.
☆ Method: The wearer is asked in order to achieve the best possible
reading to keep their body relaxed and still during the Blood
Pressure fluctuation test while holding the Leap higher than their
heart.
New Function
12:36PPG_BP
mmHg
FindPhone PPG_BP
② Automatic Detection
Cling Leap automatically detects Blood Pressure fluctuation 3 times per day. The
default detection times are 8:00 AM, 14:00 PM and 20:00 PM.
Auto-detection only happens under quiet human behavior. This means that before
detection is enacted the number of steps made by the Leap wearer must be zero for
30 minutes before the detection will be actuated.
☆ Note: This product is not a medical device and its accompanying
data should only be used as a guide. Only an medically acceptable
device (like a Sphygmomanometer) should be used for exacting
Blood Pressure readings.
120/80
Last: 10/21 14:00
Start
PPG_BP
mmHg
Last: 10/21 14:00
--/--
Measuring
B. Outdoor Running / Cycling
Cling Leap supports the following two types of
outdoor sports motion trajectory: outdoor running and
outdoor cycling. In order to track these two workouts,
activate the Leap screen, from the Advanced Page
touch and hold the Home Key button for 3 seconds to
go to the menu page. Switch to outdoors by clicking
the Home Key for Running or Outdoor Cycling.
Click on "outdoor running"
or "outdoor riding" button to
enter the following search
satellite.
Running
Cycling
GPS connected
公里
0.00里程0.00
开始运动
Stop
continue to
search GPS
AGPS Search
Stop
Continue GPS
Start Workout
Synchronous APP update
AGPS can speed up positioning.
Got it
12:36AGPS search
Better GPS soginal
in outdoor open space
Got it
12:36GPS已连接
12:36
The search for GPS satellites is completed and the
positioning is successful. The movement is activated by
touching the "arrow" on the screen or pressing the function
key.
12:36AGPS Fail
Search GPS satellite completed, but the positioning failure,
you can click "start motion" into running mode, but in this
case will not record the track of movement, you can also
press the "return" key to exit the movement.
In search of the GPS satellite, enter the page directly by
12:36
pressing the function key or "return" button. On this page,
you can press the "return" button to stop the movement, or
you can press the function button to turn on the function of
continuing to search for GPS while moving, in this mode, the
movement before the success of positioning is no track
record.
12:36AGPS Search
If you synchronize APP, you can use AGPS, positioning time
is 10-20 seconds, the number of satellites will increase, the
same process.
routes available
after location fix
Got it
12:36AGPS search
Satellites Signal
3
12:36AGPS search
Sliding screen can be switched on the following pages.
12：34
GPS Connected
BPM
70
50
100
Warm up
Efficiency
% of Max HR
79
Press the "return key" to enter the interface, in this interface, and then press the
"return key" to end the movement, if press the function key, then continue to
move.
TIME
KILOMETER
PACE
4’58”
Save the workout?
Save Abandon
At the end of the campaign, click the button to save the data saved on the
watch, and can be uploaded synchronously through APP, if clicked to give up,
do not save the campaign information.
9:26
5.68
GPS Connected
KILOMETER
4.82
TIME PACE
0:26:31
12:36
公里
5’49”
End Workout
Resume Workout
Ensure to abandon？
Confirm Cansel
Paused
D. Gym Mode
The GYM Mode includes four sports modes: Treadmill, Elliptical, Stationary Bicycle
and Aerobics. Sport screens can be switched between the following interfaces. The
wearer can enter the selected GYM Mode for touch “GYM”.
StopWacth
GYM
Elliptical Stairs Biking Rowing Aerobic
Treadmill
The flow chart of the treadmill is as follows.
Treadmill
12:36
KILLOMETER
公里
0:00
TIME PACE
0:00:49 00’00’’
Treadmill
70
50
Warm up
Efficiency
% of Max HR
Elliptical
TIME
公里
0:26:31
Calories HeartRate
128559
In motion mode, the following two interfaces are switched
through touch screen or function button.
12：34
BPM
100
79
Treadmill
117
Fat burning
50 100
Efficiency
% of Max HR
12：34
BPM
63
TIME
公里
0:26:31
Calories HeartRate
128559
12：34
Treadmill
130
Enhancement
50 100
Efficiency
% of Max HR
12:36Stairs
BPM
79
Biking 12:36 12:36Rowing
TIME
公里
0:00:55
Calories HeartRate
136873
12：34
Treadmill
BPM
159
Strengthening
50 100
Efficiency
% of Max HR
82
TIME
公里
0:26:31
Calories HeartRate
Treadmill
186
Anaerobic sprint
50 100
Efficiency
% of Max HR
173469
12：34
BPM
95
D. Music Playback Function
Music 12：34
*Android :
1. Adaptable phones need to search for the corresponding
Hicling device in Settings-Bluetooth, click Pair, and then click
Connection to confirm that "Connected to Input Device" appears.
2. The player on the phone must be playing.
*IOS :
1. Leap is paired with smart phones to play music.
2. The player on the phone must be playing.
E. Find Your Phone
Android & IOS
12:36
Find Phone
Sending alerts to your
phone...
1.The mobile phone APP is in the open state.
2.Touch the “Find phone”,your phone will ring.
preconditionsystem Profiles response Notice
bells+Vibration
Android
IOS
APP login
successfully
and leap runs
normally.
Vibration
bells
bells+Vibration
mute+Vibration
mute
4.
APP Important Reminder Settings
bells+Vibration
Click APP to stop.
Vibration
Click APP to stop.
You can stop the ring
through the volume
key (+ / -) on your
phone. In the lock
screen state, the bell
can be stopped by
opening the key.
Silent and no
response
Ring tones are
phone ringtones
set by mobile
phones.
The ring tone
is the ringing
tone pushed
by IOS APP,
not the ringing
tone set by
mobile phone.
E. Caller Rejection
The Leap wearer can set up the Call Rejection feature from the Cling App menu. The
wearer has the option upon receiving a phone call to answer the call. The wearer can
set the App under unanswered call settings to handle call reminder settings. When
the wearer receives a phone call the Leap ring vibration screen is displayed with the
incoming call number / contact. If the wearer chooses to use the "refuse to answer
the phone" they can short touch the screen button to stop the Leap vibration or touch
for a longer 3 seconds to refuse to receive calls.
☆ Note: more than 8 of the phones in Android system are still in
development.
G. Intelligent Reminder
When there is new information, the Leap will vibrate to remind the wearer and
display the Envelope icon The wearer can then touch the button to view the
message content.
☆ Note: Please open the corresponding Smart Reminder in App.
5.
Frequently Asked Questions:
Q1: How to activate Leap?
A: Upon receiving the Leap it needs to be activated first. Place the Leap in the USB charger
when it is not activated. When the screen lights up, the 4-bit Bluetooth code is then displayed
on the Leap screen. To download the Cling App activation device, follow the instructions.
(Note: Select the same model connection as the product type during
activation.)
Q2：If the Leap activation is unable to search for equipment?
A: Please make sure that your phone Bluetooth is turned on. Verify that the access device you
entered is in line with your device type.
1.If your Leap is currently dark screen, you can use a key or charge it to light up the screen to
wake up the Leap.
2. If your Leap is displayed on-screen and doesn't have a Bluetooth connection symbol, you
can place the device in the charging seat.
3. Bluetooth is occupied.
a. Android phones, please cancel the manual pairing in the list of Bluetooth paired devices.
Open Bluetooth, open the Cling App and activate it step by step.
b. Excluding whether other mobile phones are paired or linked, you need to disconnect the
connection and give up the Bluetooth of the device before the Cling App can search for the
Leap device.
Q3. Data can not be synchronized and has not been connected.
A. If the Cling App keeps showing no connection, it may be caused by the Bluetooth protocol
of the mobile phone not cleaning up the Bluetooth state saved before after many
connection/disconnection sessions.
At this point, you need to exit the login status of Cling App, according to the particular mobile
phone system and the following corresponding operation:
1.IOS: Find your Leap Bluetooth number in the App Bluetooth screen, ignore the device,
remove the Bluetooth connection between the Leap and the phone, switch the flight mode of
the phone on and off, then reopen the Cling App.
2.Android: Switch on the Bluetooth on the phone, then reopen the Cling App.
Q4. App is too slow.
A. It is suggested to synchronize the data of the Leap once a day to speed up the synchroniza-
tion process because the data stored in the Leap is too large.
Q5. How to deal with a firmware upgrade failure?
A. If the first upgrade fails, please confirm whether the Leap and Cling App are connected.
Please synchronize the Leap data before upgrading.
Q6. How to manage the application permissions of Cling App?
A. 1.Android Phone-Settings-Privilege Management-Cling Applications-Select Related
Privileges.
2. IOS mobile phone-set-cling-to select the relevant permissions (to receive notification
from the notification center).
Q7. How does Android mobile set Cling App running in the background?
A.1. Setting up permission management - Cling App- to set up trust in this software. If you
install a security management class or a cleanup accelerator class application, set the Cling
App to a White List (trust list).
2. In the privilege management program of the mobile phone system, please set "Cling" as a
trusted application. Caller display and other functions need to obtain this privilege to achieve
the function.
3. The abolition of electricity saving mode.
4. Set up the background application lock.
VI
.Basic Parameters
Weight
33.7g（With Wristband）
Display Size
1.28 Inch Rectangular
Display Resolution
176x176 Pixels
Touch Screen
ITE
Lens Material
PMMA Organic Glass
Battery
220 mAh Lithium Ion
Key
Stainless steel
41.8mm x 33.9mm x 11mm
Global positioning system
Bluetooth Low Energy 4.0
System Support
Android 4.4+ and IOS8.0
Size
Case Material
PC Polycarbonate
GPS
Bluetooth
Water Rating
Underwater 50m
Antenna
FPC Antenna
Wristband Material
Silicon UV-Resistant, Breathable
☆ Note: For a better experience the Cling App software and Leap
firmware will be updated from time to time, please update to the
latest push versions available.
NOTE:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
+
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Thank you for choosing Cling Leap Wristband. Please read this warranty guide carefully before using the device.
If you would like to know more information about Cling Leap, please go to our website: www.hicling.com
Important Notice:
1. Avoid exposing the Leap to heat or ultra low temperatures.
2. Avoid cleaning the Leap when it is charging.
3. Avoid placing the Leap from coming into contact with liquids when it is charging.
4. Avoid using a hammer or sharp tools on the Leap.
5. Do not disassemble the Leap for maintenance.
6. Do not wear the Leap in a hot water, steaming environments (sauna for example) and other extreme cold or
hot changes activities.
1. Warranty period：1 year free warranty service: Core device and charging base. 1 year warranty service: Device
package, user guide, USB cable and strap.
2. 7 days refund：Consumer can get a refund (invoice amount), replacement or maintenance according to
government warranty policy within 7 days from the date of purchase. Please provide receipt and location of
purchase.Fees to ship the device back to us is the responsibility of the consumer.
3. 8 to 15 days replacement or maintenance. Consumer can choose replacement or maintenance within 8-15 days
by providing the after service testing report. The after service testing report must come from an authorized
maintenance center and must indicate that it is not man-made damage.
4. Consumer can have paid service when he/she meets the below criteria:
(1)Product exceeds the warranty period；
(2)Unable to provide warranty card or invoice except he/she can approve it is in warranty period;
(3)Product model number does not match with warranty card detailes;
(4) Damage of product is not caused by authorized maintenance center;
(5) Damage of product is caused by force majeure;
(6) Damage of product is caused by inappropriate use;
(7) Damage of product is caused by private dissassembling.
1. The product is not a medical equipment. Please do not rely on this product’s data to diagnose, treat or prevent
any forms of sickness. If you are feeling unwell, please consult and seek medical attention ASAP.
2. This product’s exercise suggestion is only for your reference. If you would like to enhance and change your
daily routine, please seek professional help.
3. Please use this product and application according to local legislation.
4.Please scrap this product according to local legislation.
Introduction
Warranty And After Service
Loading...