Hiboost F08GI-5S-BTW User Manual

User' s M anual

F08GI-5S-BTW

MADE IN HUAPTEC

1 / 14

Content

WHAT IS INCLUDED .................................................................................. 3

1 HOW IT WORKS ................................................................................. 3

2 TOOL REQUIRED ................................................................................ 3

3 HOW TO INSTALL YOUR NEW CELLULAR BOOSTER ............................ 4

3.1 Overview ................................................................................... 4

3.2 Plan the layout of your system .................................................. 6

3.3 Check for Signal Strength .......................................................... 6

3.4 Run coaxial cable ....................................................................... 6

3.5 Install the Donor (Outdoor) antenna ......................................... 6

3.6 Install the Server (Indoor) antenna ............................................ 7

3.7 Install your cellular booster ....................................................... 7

3.8 Power up your cellular booster ................................................. 7

4 UNDERSTAND THE PORTS and LED STATUS,MGC ............................... 8

4.1 Repeater ports ........................................................................ 8

4.2 LED Status ................................................................................. 8

5 UNDERSTAND THE ANTENNA ............................................................ 9

5.1 Donor (Outdoor) antenna ......................................................... 9

5.2 Server (Indoor) antenna ............................................................ 9

5.3 Authorized Kitting Options ........................................................ 9

6 TROUBLESHOOTING ........................................................................ 10

7 FREQUENTLY ASKED QUESTIONS ..................................................... 12

8 FCC RF Exposure Statement ............................................................ 12

9 Warning and Statement .................................................................. 12

2 / 14

WHAT IS INCLUDED

Phillips Screwdriver

Drill

Cellular Phone (to check signal
strength)

1. HiBoost Mini

2. Outdoor Antenna & Cable

3. Indoor Antenna &Cable (option)

4. AC/DC Power Adapter

1 HOW IT WORKS

The cellular booster provides reliable two-way cellular coverage by improving signal
strength in homes, buildings, offices, and other areas where cellular reception is weak
or unreliable.

The system amplifies the signal from the nearest cellular tower and retransmits at a
higher power level within a local area.

This manual provides simple installation instructions that will have your cellular
booster kit running in record time.

2 TOOL REQUIRED

3 / 14

3 HOW TO INSTALL YOUR NEW CELLULAR BOOSTER

Use the built –in antenna

Use the

1.booster 2.outdoor antenna

3.cabel 4. power supply

5.indoor antenna 6. cabel (the same as No.3 cabel )

indoor antenna

3.1 Overview

This guide will help you properly install your cellular booster kit. It is important to read
through all of the installation steps before installing your equipment. Thoroughly read
through the instructions, visualize where all the
installed and do a soft installation before mounting any equipment.

The installation process shown as below :

equipment will need to be

4 / 14

1

2

3

4

• BOOSTER – select location

•Install the booster in an area that is protected from the weather,
properly ventilated and is away from excessive heat and moisture.

• DONOR ANTENNA (OUTDOOR)- select location

•Mount the signal (outdoor) antenna in an elevated outdoor location so
that it points towards the cellular tower and away from where the inside
antenna will be located.

• OUTDOOR COAXIAL CABLE - select location

•The outdoor coaxial cable is used to connect the donor (outdoor)
antenna to the booster.

• INDOOR COAXIAL CABLE- (if used)

•The indoor coaxial cable is used to connect the server (indoor) antenna

to the booster.you can choose the indoor omni antenna or panel antenna .

5

6

！

7

8

• SERVER ANTENNA (indoor)

•The ideal location for the distribution antenna will be the area of your
property where you need to improve the signal most.

•NOTE:The signal strength will be strongest closest to the antenna.

•IMPORTANT: The signal antenna (outdoor)should always be separated from the
distribution antenna (indoor)by at least 20 vertical feet including the separation
of a thick barrier such as a roof or a wall. Depending on the strength of your
outdoor signal, the weaker the signal the less separation distance is required.

•LIGHTNING SURGE PROTECTOR- (SOLD SEPARATELY)

•The lightning surge protector connects in between the signal antenna and the
booster.

•IMPORTANT: Lightning surge protector must be grounded.

• COMMISSIONING THE SYSTEM

5 / 14