HHB comm CDR 830 User Manual
CDR-830
DIGITAL
ANALOG
REC LEVEL
REC LEVEL
TEXT
MENU/
DELETE
SYNCHRO
PROFESSIONAL
CD TEXT
MONITOR
TITLE/MODE
DISPLAY
SCROLL
TRACK NO.
WRITE
INPUT
AUTO
FINALIZEERASE
SELECTOR
MANUAL
Operating Instructions
interstage
Phistersvej 31, 2900 Hellerup, Danmark
Telefon 3946 0000, fax 3946 0040
www.interstage.dk
- pro audio with a smile
La versión en español del manual de operaciones la encontrará en la web de HHB www.hhb.co.uk
La version Française de ce manuel d'utilisation est disponible sur le site web de HHB à www.hhb.co.uk
Eine deutsche Version dieser Bedienungsanleitung ist im Internet unter der Adresse www.hhb.co.uk erhältlich
.
IMPORTANT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the
user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral
triangle is intended to alert the user to the presence
of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
IMPORTANT SAFETY INSTRUCTIONS
READ INSTRUCTIONS — All the safety and operating
instructions should be read before the product is
operated.
RETAIN INSTRUCTIONS — The safety and operating
instructions should be retained for future reference.
HEED WARNINGS — All warnings on the product and
in the operating instructions should be adhered to.
FOLLOW INSTRUCTIONS — All operating and use
instructions should be followed.
CLEANING — Unplug this product from the wall outlet
before cleaning. The product should be cleaned only
with a polishing cloth or a soft dry cloth. Never clean
with furniture wax, benzine, insecticides or other
volatile liquids since they may corrode the cabinet.
ATTACHMENTS — Do not use attachments not
recommended by the product manufacturer as they
may cause hazards.
WATER AND MOISTURE — Do not use this product
near water — for example, near a bathtub, wash
bowl, kitchen sink, or laundry tub; in a wet basement;
or near a swimming pool; and the like.
ACCESSORIES — Do not place this product on an
unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury to a child or
adult, and serious damage to the product. Use only
with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with
the product. Any mounting of the product should
follow the manufacturer’s instructions, and should
use a mounting accessory recommended by the
manufacturer.
CART — A product and cart combination should be
moved with care. Quick stops, excessive force, and
uneven surfaces may cause the product and cart
combination to overturn.
VENTILATION — Slots and openings in the cabinet are
provided for ventilation and to ensure reliable
operation of the product and to protect it from
overheating, and these openings must not be
blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug,
or other similar surface. This product should not be
placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
POWER SOURCES — This product should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of
power supply to your home, consult your product
dealer or local power company.
LOCATION – The appliance should be installed in a
stable location.
NONUSE PERIODS – The power cord of the appliance
should be unplugged from the outlet when left unused for a long period of time.
GROUNDING OR POLARIZATION
¶ If this product is equipped with a polarized alternating
current line plug (a plug having one blade wider than
the other), it will fit into the outlet only one way. This
is a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
¶ If this product is equipped with a three-wire
grounding type plug, a plug having a third (grounding)
pin, it will only fit into a grounding type power outlet.
This is a safety feature. If you are unable to insert the
plug into the outlet, contact your electrician to
replace your obsolete outlet. Do not defeat the
safety purpose of the grounding type plug.
POWER-CORD PROTECTION — Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords at
plugs, convenience receptacles, and the point where
they exit from the product.
OUTDOOR ANTENNA GROUNDING — If an outside
antenna or cable system is connected to the product,
be sure the antenna or cable system is grounded so
as to provide some protection against voltage surges
and built-up static charges. Article 810 of the National
Electrical Code, ANSI/NFPA 70, provides information
with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode.
See Figure A.
LIGHTNING — For added protection for this product
during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product
due to lightning and power-line surges.
POWER LINES — An outside antenna system should
not be located in the vicinity of overhead power lines
or other electric light or power circuits, or where it
can fall into such power lines or circuits. When
installing an outside antenna system, extreme care
should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.
OVERLOADING — Do not overload wall outlets,
extension cords, or integral convenience receptacles
as this can result in a risk of fire or electric shock.
ELECTRIC
SERVICE
EQUIPMENT
Fig. A
OBJECT AND LIQUID ENTRY — Never push objects of
any kind into this product through openings as they
may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
SERVICING — Do not attempt to service this product
yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
DAMAGE REQUIRING SERVICE — Unplug this product
from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
¶ When the power-supply cord or plug is damaged.
¶ If liquid has been spilled, or objects have fallen into
the product.
¶ If the product has been exposed to rain or water.
¶ If the product does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to its
normal operation.
¶ If the product has been dropped or damaged in any
way.
¶ When the product exhibits a distinct change in
performance — this indicates a need for service.
REPLACEMENT PARTS — When replacement parts
are required, be sure the service technician has used
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock, or other hazards.
SAFETY CHECK — Upon completion of any service or
repairs to this product, ask the service technician to
perform safety checks to determine that the product
is in proper operating condition.
WALL OR CEILING MOUNTING — The product should
not be mounted to a wall or ceiling.
HEAT — The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce
heat.
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC — NATIONAL ELECTRICAL CODE
2
WARNING: THE APPARATUS IS NOT
WATERPROOF, TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE AND DO NOT PUT ANY WATER SOURCE OR
FLUID CONTAINER NEAR THIS APPARATUS.
WARNING: THIS PRODUCT EQUIPPED WITH A
THREE-WIRE GROUNDING (EARTHING) TYPE PLUG, A
PLUG HAVING A THIRD (GROUNDING, EARTHING) PIN,
WILL ONLY FIT INTO A GROUNDING (EARTHING) TYPE
POWER OUTLET. THIS IS A SAFETY FEATURE. IF YOU
ARE UNABLE TO INSERT THE PLUG INTO THE OUTLET,
CONTACT YOUR ELECTRICIAN TO REPLACE YOUR
OUTLET. DO NOT DEFEAT THE SAFETY PURPOSE OF
THE GROUNDING (EARTHING) TYPE PLUG.
WARNING: NO NAKED FLAME SOURCES, SUCH
AS LIGHTED CANDLE, SHOULD BE PLACED ON OR
NEAR THE APPARATUS.
[For Canadian model]
This Class B digital apparatus complies with
Canadian ICES-003.
[Pour le modèle Canadien]
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
[For U.S. model]
DANGER – LASER RADIATION WHEN
OPEN.
AVOID DIRECT EXPOSURE TO BEAM.
This caution can be found on the rear panel of
the unit.
WARNING: Slot and openings in the cabinet are
provided for ventilation and to ensure reliable operation
of the product and to protect it from overheating, to
prevent fire hazard, the openings should never be
blocked and covered with items, such as newspapers,
table-cloths, curtains, etc. Also do not put the apparatus
on the thick carpet, bed, sofa, or fabric having a thick
pile.
CAUTION:
¶ Use of controls or adjustments or performance of procedures other than those specified herein hazardous radiation
exposure.
¶ The use of optical instruments with this product will increase eye hazard.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
This product satisfies FCC regulations when shielded cables and connectors are used to connect the
unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections.
Information to User
Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate
the equipment.
3
Thank you for buying the HHB CDR-830 Professional
Compact Disc recorder. The CDR-830 is designed to make
the professional CD recording process as straightforward
as possible. However we do recommend that you read
these operating instructions carefully, and keep them in a
safe place for future reference.
In some countries, the shape of the power plug and outlet
may differ from that shown in the explanatory drawings.
The method of connecting and operating the unit is,
however, the same.
This product complies with the Low Voltage Directive (73/23/EEC, amended by 93/68/ EEC), EMC Directives (89/
336/EEC, 92/31/EEC and 93/68/EEC).
IMPORTANT NOTICE: Please register
ownership of your CDR-830 with HHB Communications
using the supplied card. Registration could assist in the
recovery of your CDR-830 in the unfortunate event of
theft.
A WORD ABOUT DISCS: Your HHB CDR-
830 Professional CD Recorder is designed to
operate with a broad range of blank CD-R media.
However, for consistently high quality results and
superior archiving stability, we recommend that you
ask your dealer for HHB CD-R discs.
CAUTION
This product contains a laser diode of higher class
than 1. To ensure continued safety, do not remove
any covers or attempt to gain access to the inside
of the product.
Refer all servicing to qualified personnel.
The following caution label appears on your unit.
Location: Rear of the unit.
CLASS 1
LASER PRODUCT
CAUTION: THE POWER SWITCH DOES NOT
COMPLETELY SEPARATE THE UNIT FROM THE MAINS
IN THE OFF POSITION, THEREFORE INSTALL THE UNIT
IN A SUITABLE PLACE FOR EASY DISCONNECTION OF
THE MAINS PLUG IN CASE OF AN ACCIDENT. THE
MAINS PLUG OF THE UNIT SHOULD BE UNPLUGGED
FROM THE WALL SOCKET IF THE UNIT IS LEFT UNUSED FOR A LONG PERIOD OF TIME.
Operating Environment
Operating environment temperature and humidity:
+5°C – +35°C (+41F – +95F); less than 85%RH (cooling
vents not blocked)
Do not install in the following locations
÷ Location exposed to direct sunlight or strong artificial
light
÷ Location exposed to high humidity, or poorly venti-
lated location
Bij dit product zijn batterijen
geleverd. Wanneer deze leeg
zijn, moet u ze niet weggooien
maar inleveren als KCA.
4
Contents
1 Before You Start
Feature of the
CDR-830 BurnIT CD recorder ................... 6
Checking what’s in the box........................ 6
Using this manual ................................... 6
Hints on installation ................................. 6
Putting the batteries in the remote control ... 7
Avoiding condensation problems ........... 7
Care and maintenance ............................. 7
Cleaning external surfaces .................. 7
Moving the unit .................................. 7
Storing optical cable ........................... 7
Handling discs ................................... 7
Storing discs ..................................... 8
Discs to avoid .................................... 8
CD lens cleaner ................................. 8
About CD, CD-R and CD-RW discs ............. 8
Playback-only CDs .............................. 8
CD-Recordable discs .......................... 8
CD-Rewritable discs............................ 8
CD TEXT discs ................................... 8
Recording and finalizing discs ............... 9
Recording copyright material ............... 9
2 Connecting Up
Connecting up for
digital playback & recording .................... 10
About optical and coaxial jacks ........... 10
Using the digital inputs...................... 10
Using the digital outputs ................... 10
Connecting up for
analog playback & recording ................... 11
POWER-CORD CAUTION......................... 11
3 Controls and Displays
Front panel .......................................... 12
Remote control .................................... 13
Display ................................................ 14
4 Getting Started
Switching on for the first time ................. 15
Selecting tracks directly ......................... 16
Using the menu features ........................ 16
Showing CD text information ................... 16
Showing disc information........................ 17
Introduction to CD recording ................... 17
Digital recording restrictions .............. 17
Recording modes ............................. 18
Miscellaneous information ................. 18
Digital recording from DAT ................ 18
Digital signal interruptions ................. 18
Power interruptions .......................... 18
Recording one track from a source ......... 19
Recording all tracks from a source .......... 20
Automatically recording
and finalizing a disc ............................... 21
Manual recording .................................. 22
Setting the digital recording level ............. 23
Setting the analog recording level ............ 24
Setting the balance ............................... 25
Finalizing a disc ..................................... 26
Resetting the recorder .......................... 26
5 More Playback Features
Programming the track order ................. 27
Clearing the playlist .......................... 27
Clearing a track from the playlist ........ 27
Checking what's in the playlist ............ 27
Replacing a track in the playlist .......... 27
Playing tracks at random ....................... 28
Repeating tracks................................... 28
Fading in and fading out ......................... 28
Playing a disc with skip IDs ..................... 28
Skipping unwanted tracks ....................... 29
Setting skip IDs ................................ 29
Clearing skip IDs .............................. 29
6 More Recording Features
Using CD text ....................................... 30
Editing CD text ................................. 31
Copying track names to other tracks ....... 32
Automatically numbering tracks............... 33
Manually numbering tracks ..................... 33
Starting tracks in time increments ........... 34
Recording fade ins and fade outs ............ 34
Setting the fade length ...................... 34
Recording a fade in .......................... 34
Recording a fade out ........................ 34
Recording blank sections........................ 35
Checking what's at the end of a disc ........ 35
Monitoring a source .............................. 36
To establish the copy-bit (SCMS) setting ... 36
Erasing a CD-RW disc ........................... 37
When a non-finalized disc is loaded ..... 37
When a finalized disc is loaded ........... 38
Reinitializing a disc ........................... 38
7 Additional Information
Understanding display messages ............. 39
Troubleshooting .................................... 40
Display messages relating to playback .... 40
Display messages relating to recording ... 41
Specifications ....................................... 43
5
1 Before you start
Features of the CDR-830 BurnIT CD recorder
Create your own audio CDs
The HHB BurnIT offers a high-quality and affordable way to burn your own audio CDs. Create original
recordings, or assemble professional compilations from existing source material.
The CD text feature of the CDR-830 allows you put text information on your recordings to easily identify
and select from the contents.
Make digital recordings from any source
The CDR-830 can accept digital input via optical or coaxial cable, meaning that you can connect it to
almost any other digital audio component. Also, thanks to the built in sampling rate converter, you can
make direct digital recordings from many different sources such as DAT (32kHz up to 48kHz), as well as
CD and MD (both 44.1kHz). A sampling rate converter ‘through’ feature (for 44.1kHz sources only)
enables you to record HDCD and DTS encoded CDs too. Analog sources are also catered for with the
analog line inputs, suitable for connection to standard unbalanced line level connections.
Use both ordinary recordable CDs and rewritable CDs
Ordinary recordable CDs (CD-R) can be recorded on just once, but the relatively cheap cost of blank discs
and the ability to play the recorded discs on any ordinary CD player* make them ideal for many
applications. Compact Disc Rewritable, or CD-RW, is a more recent type of recordable CD that allows
erasing and re-recording of the disc. Although the blank discs are more expensive, this ability to use the
discs over and over gives them the edge in terms of flexibility over CD-R**.
* While most CD players should have no problems with
CD-R discs, if the laser pickup is dirty (from prolonged exposure to tobacco smoke, for example), the
player may not be able to read some CD-R discs.
**At the time of writing, meny ordinary CD players cannot play CD-RW discs. Check in the instructions
that came with the player for compatibility.
Checking what’s in the box
Make sure that you’ve received the following
supplied accessories with your CDR-830 CD
Recorder:
1 Two sets of audio
cords
2 AC power cord
3 Remote control unit
• Also included in the box is your Registration
card , this instruction manual, the HHB
BurnIT brochure, and the HHB BurnIT Quick
reference guide.
4 Two ‘AA’ size R6P
batteries
5 HHB CD-R 80 disc
Using this manual
This manual is for the CDR-830 CD Recorder. It
is split into two sections: the first shows how to
set up the CD recorder; the second takes you
through each stage of operation. Set up, which
starts here, shows you how to get your new CD
recorder up and running with the rest of your
audio equipment.
In the second section of the manual, starting on
page16, you’ll learn how to use the various
features of the recorder.
The final part of the manual provides reference
information on display messages you might
6
encounter during use, a troubleshooting
section, and technical specifications.
Hints on installation
We want you to enjoy using the CDR-830 for
years to come, so please bear in mind the
following points when choosing a suitable
location for it:
Do...
✔ Use in a well-ventilated location.
✔ Place on a solid, flat, level surface, such as a
table or shelf. Ideally rack mount the recorder
in a 19” rack.
Don’t...
✘ Use in a place exposed to high temperatures
or humidity, including near radiators and other
heat-generating appliances.
✘ Place on a window sill or other place where
the player will be exposed to direct sunlight.
✘ Use in an excessively dusty or damp
environment.
✘ Place on an unstable surface, or a surface is
not large enough to support all four of the
unit’s feet.
1 Before you start
Putting the batteries in the remote control
• Turn over the remote control, then press and slide the battery compartment cover off.
• Put in the batteries supplied, taking care to match the plus and minus ends of each battery with the
markings inside the compartment.
• Slide the cover back on, and your remote is ready for use.
Caution!
Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following:
• Don’t mix new and old batteries together
• Don’t use different kinds of battery together—although they may look similar, different batteries may
have different voltages.
• Make sure that the plus and minus ends of each battery match the indications in the battery
compartment.
• Remove batteries from equipment that isn’t going to be used for a month or more.
• When disposing of used batteries, please comply with governmental regulations or environmental
public institution’s rules that apply in your country or area.
Avoiding condensation problems
Condensation may form inside the player if it is
brought into a warm room from a cold
environment, or if the temperature of the room
rises quickly. Although the condensation won’t
damage the player, it may temporarily impair its
performance. For this reason you should leave it
to adjust to the warmer temperature for about
an hour before switching on and using.
Care and maintenance
Cleaning external surfaces
Before cleaning turn off and disconnect the unit
from the power outlet. To clean, wipe with a soft,
dry cloth. For stubborn dirt, wet a soft cloth with
a mild detergent solution made by diluting one
part detergent to 5 or 6 parts water, wring well,
then wipe off the dirt. Use a dry cloth to wipe
the surface dry. Do not use volatile liquids such
as benzene or thinners which may damage the
surfaces.
Moving the unit
If you need to move the unit, first switch it off and
unplug from the wall outlet. Never lift or move
the unit during playback or recording—the disc
rotates at a high speed and may be damaged.
Storing optical cable
When storing optical cable, coil
loosly as shown at right. The
cable may be damaged if bent
around sharp corners.
more
+ than =
5-7/8 in
(15 cm)
Handling discs
When holding CDs of any type, take care not to
leave fingerprints, dirt or scratches on the disc
surface. Hold the disc by its edge or by the
center hole and edge. Damaged or dirty discs
can affect playback and/or recording performance. Take care also not to scratch the label
side of the disc. Although not as fragile as the
recording side, scratches can still result in a
disc becoming unusable.
Should a disc become marked with fingerprints,
dust, etc., clean using a soft, dry cloth, wiping
the disc lightly from the center to the outside
edge. If necessary, use a cloth soaked in alcohol,
or a commercially available CD cleaning kit to
clean a disc more thoroughly. Never use
benzene, thinners or other cleaning agents,
including products designed for cleaning vinyl
records.
Wipe lightly from the
center of the disc
using straight
strokes.
Don’t wipe the disc
surface using
circular strokes.
7
1 Before you start
Storing discs
Although CD, CD-R and CD-RW discs are very
durable, you should still take care to handle and
store discs correctly. When you're not using a
disc, return it to its case and store upright.
Avoid leaving discs in excessively cold, humid, or
hot environments (including under direct
sunlight).
When labeling discs, use a felt-tip pen sold for
marking CDs. Use only labels that are designed
specifically for CD use. Don't glue paper or put
other stickers onto the disc, or use a pencil, ballpoint pen or other sharp-tipped writing
instrument. These could all damage the disc.
Discs to avoid
This recorder is not compatible with 90-minute
CD-Rs or High Speed CD-RW discs. Do not use
either type of disc with this recorder.
CDs spin at high speed inside the player during
playback and recording. If you can see that a
disc is cracked, chipped, warped, or otherwise
damaged, don't risk using it in your CD recorder
or player—you could end up damaging the unit.
The CDR-830 is designed for use with conventional, fully circular CD’s only. Use of shaped CD’s
is not recommended for this product. HHB
disclaims all liability arising in connection with the
use of shaped CD’s.
CD lens cleaner
The compact disc recorder's pickup lens should
not become dirty in normal use, but if for some
reason it should malfunction due to dirt or dust,
consult your nearest HHB authorized service
center. Although lens cleaners for compact disc
recorders are commercially available, we do not
recommend using them since some may
damage the lens.
About CD, CD-R and CD-RW discs
The CDR-830 is compatible with four types of
compact disc:
Playback-only CDs
This unit will playback any ordinary
audio CDs carrying the Compact Disc
Digital Audio mark shown right.
CD-Recordable discs
Recordable CDs, or CD-R, carry the
mark shown right, and are 'write
once'. This means that having
recorded something on the disc it is
permanent—it can't be re-recorded
or erased.
CD-Rewritable discs
Rewritable CDs, or CD-RW, carry
the mark shown right. As the name
indicates, you can erase and rerecord material on these discs so
that they can be used over and
over again.
CD TEXT discs
CD Text discs, carry the mark
shown right. These are
commercially available discs that
will display the disc title, artist
name, and track titles of the disc
when played in a CD text
compatible player.
Your HHB CDR-830 Professional CD Recorder is
designed to operate with a broad range of CD-R
or CD-RW media. However, for consistently high
quality results and superior archiving stability, we
recommend that you ask your dealer for these
commercially available CD-R or CD-RW discs
from HHB.
CDR 74 Gold CDR 74 Silver
CDR 74 Silver P CDR 80 Silver
CDRW 74 CDRW 80
You may also use consumer audio CD-R and CDRW discs with this recorder.
8
1 Before you start
Recording and finalizing discs
Unlike other recording media, recordable CDs
have a number of distinct states, and what you
can do with a disc depends on the current state
of the disc. The figure below shows the three
states—blank, partially recorded, and finalized—
and summarizes what’s possible (✔) and
impossible (✘) in each.
CD-R
Recordable
✔
Erasable
✘
Skip ID set/clear
✘
Plays in ordinary
✘
CD player
Recordable
✔
Erasable
✘
Skip ID set/clear
✔
Plays in ordinary
✘
CD player
Recordable
✘
Erasable
✘
Skip ID set/clear
✘
Plays in ordinary
✔
CD player
Recording
CD-R
Finalization
CD
Recordable
✔
Erasable
✘
Skip ID set/clear
✘
Plays in ordinary
✘
CD player
Recordable
✔
Erasable
✔
Skip ID set/clear
✔
Plays in ordinary
✘
CD player
Recordable*
✘
Erasable
✔
Skip ID set/clear
✘
Plays in ordinary
✘
CD player
* Once the CD-RW has been erased, it be-
comes recordable again and skip IDs can be
set and cleared.
** In general, current CD players cannot play CD-
RW discs. However, this situation will change
in the future.
The process of finalization fixes the contents of a
CD-R in place permanently by creating a Table of
Contents (TOC, for short) at the beginning of the
disc which tells other players exactly what's on
the disc and where to find it. See
disc
on page 26 for more details on finalization.
Finalizing a
**
CD-RW
CD-RW
CD-RW
FINALIZE
Recording copyright material
WARNING: Recording of CD’s or other material
protected by copyright can be unlawful, and the
CDR830 is not supplied for such purposes.
Please ensure that this unit is not used for any
infringement of copyright law. HHB accepts
absolutely no responsibility regarding the use of
this product for unlawful purposes.
Keep in mind the following when using the remote
control unit:
• Make sure that there are no obstacles in
between the remote and the remote sensor on
the unit.
• Use within the operating range and angle, as
shown in the diagram below.
• Remote operation may become unreliable if
strong sunlight or fluorescent light is shining on
the unit’s remote sensor.
• Remote controllers for different devices can
interfere with each other. Avoid using remotes
for equipment located near this unit while using
the CDR-830.
• Replace the batteries when you notice a fall off in
the operating range of the remote.
*
30
30
23ft. (7m)
9
2 Connecting up
CDR–830
LINE
REC
IN
OUT
PLAY
DIGITAL IN
OPTICAL COAXIAL OPTICAL COAXIAL
DIGITAL OUT
AC IN
Choose either the
coaxial or the optical
or
or
connector.
10
Digital playback component
(Digital console CD, MD, DAT player, etc.)
Before making or changing the connections,
switch off the power and disconnect the power
cord from the AC outlet.
Please ensure that if you are using the coaxial
digital connections that 75 ohm video type cable
is used.
Connecting up for digital
playback & recording
The diagrams on these pages show possible
connections with various other components in
your system. Before you start connecting your
system, make sure that all the components are
switched off and disconnected from the wall
outlet.
About optical and coaxial jacks
The CDR–830 has both optical and coaxial jacks
for both digital input and output. There’s no need
to connect both, but since some equipment has
only one type of connector—and you can only
connect like with like—having both types on this
unit can be an advantage.
To use the optical jack, you’ll need an optical cable.
These are readily available at audio dealers. When
buying, check that the cable is no longer than 3m.
Pull out the dust cap and store it
in a safe place for future use.
Check that both optical plug and
socket are free from dust—if
necessary, clean with a soft, dry
cloth. The optical lead will only go
in one way, so match up the jack
and the plug before inserting fully.
Digital recording component
(CD-R, MD, DAT recorder,
etc.)
When connecting optical leads, take care not to
bend the cable around sharp corners as this can
damage the cable. Likewise, when storing optical
cable, coil loosely (as shown on page 7).
If you’re using one of the coaxial-type digital
connectors you’ll need a lead with an RCA/
phono plug at each end. Please only use digital
audio cables, not normal audio interconnects.
Using the digital inputs
To make direct digital recordings on the CDR–
830 you’ll need to connect the digital output of a
source (like a CD, MD, or DAT player) to one of
the digital inputs on this unit. To make
recordings from analog sources (like an analog
tape deck) connect the outputs of your analog
source to the line inputs of the CDR–830—see
the following page for more detail.
Using the digital outputs
If you have another digital recorder, such as a
MD or DAT recorder, you might want to use the
CDR–830 as a digital source. In this case,
connect one of the digital outputs of the CDR–
830 to a similar digital input on your other digital
recorder.
CDR–830
L
R
R
L
L
R
LINE
REC
IN
MD/TAPE
OUT
2 Connecting up
PLAY
L
R
L
R
R
L
INPUTOUTPUT
PLAYREC
DIGITAL IN
OPTICAL COAXIAL OPTICAL COAXIAL
Analog console, recorder or
monitoring system
DIGITAL OUT
AC IN
Connecting up for analog playback & recording
Before you start, make sure that all the
components are switched off and disconnected
from the wall outlet.
Next, connect this unit to your mixer, recorder
or monitoring system using the two sets of
supplied audio leads.
The input to the CDR-830 must be connected to
the output of the external device - console etc.
and the output of the recorder connected to the
monitoring path of the console, or other
monitoring device.
POWER-CORD CAUTION
Handle the power cord by the plug part. Do not
pull out the plug by tugging the cord, and never
touch the power cord when your hands are wet,
as this could cause a short circuit or electric
shock. Do not place the unit, a piece of
furniture, or other object on the power cord or
pinch the cord in any other way. Never make a
knot in the cord or tie it with other cords. The
power cords should be routed so that they are
not likely to be stepped on. A damaged power
cord can cause a fire or give you an electric
shock. Check the power cord once in a while. If
you should find it damaged, ask your nearest
HHB authorized service center or your dealer for
a replacement.
11
3 Controls and Displays
DIGITAL
REC LEVEL
ANALOG
REC LEVEL
CD TEXT
Front panel
1 POWER switch (p.15)
Switches power to the unit on and off.
2 SCROLL (p. 16)
Press to scroll through long names in CD text.
3 DISPLAY (p.17)
Switches the display mode (elapsed track time,
remaining track time, total disc playing time,
etc.)
4 TITLE/MODE (p.16,30)
Press to switch between display modes (disc
title, artist name, track title) (p.16), and
between upper- and lower-case characters while
using CD text (p.30).
5 MONITOR (p.23-25,36)
Press to monitor the selected input and display
digital source information.Indicator lights up to
remind you when you are monitoring.
6 OPEN/CLOSE
Press to open or close the disc tray.
7 RECORD
Press to enter record-pause mode for setting
input levels, etc.
8 REC MUTE
Records a blank section on a disc (for space
between tracks, etc.)
9 DIGITAL REC LEVEL /
Turn the jog dial to: set the digital recording level
(p.23); skip tracks (p.15); select options in the
menu (p.23,25,33,34); cycle through
characters in CD text (p.30); select tracks to
erase (p.37-38).
Push the jog dial to: start playback (stop mode
only) (p.15); input track numbers (during
programming) (p.27); select characters in CD
text (p.30); confirm menu settings (p.16).
10 ANALOG REC LEVEL (p.24)
Sets the recording level for analog-input
recording.
12
¶¶
¶ (p.22–25)
¶¶
••
• (p.35)
••
DISPLAY
SCROLL
FINALIZEERASE
00
0 (p.15)
00
MONITOR
TITLE/MODE
TRACK NO.
WRITE
INPUT
AUTO
SELECTOR
MANUAL
44
¢¢
4
¢ (Jog dial)
44
¢¢
MENU/
TEXT
DELETE
SYNCHRO
PROFESSIONAL
11 ERASE (p.37–38)
Press to start erasing tracks, or to re-initialize a
disc.
12 FINALIZE (p.26)
Press to start the disc finalization process (to
make recordable CDs playable on ordinary CD
players). Indicator lights up during finalization.
13 AUTO/MANUAL (p.33–34)
Switches between automatic and manual
track numbering when recording a disc.
14 INPUT SELECTOR (p.19–24,36)
Switches between the analog, optical digital and
coaxial digital inputs.
15 Remote sensor (p.9)
16 Character display (p.14)
11
17
¡¡
1
¡ / REC BALANCE (p.15,25,30)
11
¡¡
Press and hold for fast-reverse and fast-forward
playback (p.15). Use when recording to set left
and right input levels (p.25).Use to move cursor
back and forth across character display while
using CD text (p.30).
66
18
6 (p.15,26,37-38)
66
Press to play, pause, or resume playing a disc.
Also use to start recording from record-pause
mode and to start finalization and erasing.
19 TEXT (p.30–32)
Use to cycle through CD text naming options.
77
20
7 (p.16,19–22)
77
Press to stop playback or recording.
21 SYNCHRO (p.19–21)
Press to start recording on detection of an input
signal.
22 MENU/DELETE (p.16,23,25,30,33,34,36)
Press to cycle through the preference menu
options(p.16, 23, 25,33,34,36). Press to
delete characters while editing CD text (p.30).
23 PHONES jack
Plug in a pair of stereo headphones for private
listening or monitoring.
24 LEVEL
Use to adjust the phones volume.
3 Controls and Displays
Remote control
••
1
• REC MUTE (p.35)
••
Records a blank section on a
disc (for space between
tracks, etc.)
¶¶
2
¶ REC (p.22–25)
¶¶
Press to enter record-pause
mode.
3 DISPLAY (p.17)
Switches the display mode
(elapsed track time,
remaining track time, total
disc playing time, etc.)
4 TITLE/MODE (p.16,30)
Press to switch between
display modes (disc title,
artist name, track title)
(p.16), and between upperand lower-case characters
while using CD text (p.30).
5 SCROLL (p.16)
Press to scroll through long
names in CD text.
6 MARK / 10/0
Press to choose symbol characters when using
CD text. As a numeric key, this represents zero.
7 MENU/DELETE (p.16,23,25,30,33,34,36)
Press to cycle through the preference menu
options. Press to delete characters while editing
CD text.
44
8
4 (p.15)
44
Press to skip backward tracks. Also performs
those operations assigned to turning the jog dial
(see page 12).
9 Playback control (p.15–16,19–22) / ENTER
33
3 Press to play, or resume playing, a disc.
33
1 and ¡ Press and hold for fast-reverse
and fast-forward playback, and to move
cursor position using CD text.
7 Press to stop playback or recording.
ENTER Confirm playback, recording, menu
settings (p.16), and characters in CD text
(p.30).
øø
10
ø
øø
Press to skip backward index points.
11 RANDOM (p.28)
Press to start random playback.
12 REPEAT (p.28)
Use to set the repeat mode (current track, disc,
or repeat off).
13 PROGRAM (p.27)
Use to program the playback order of tracks on
a disc.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
•
DISPLAY
TITLE
/MODE
SCROLL
PQ RS TU V W XY Z
MENU/
DELETE
4
1
REPEAT RANDOM NAME CLIP
FADER
PROGRAM CHECK CLEAR
SKIP PLAY
COMPACT DISC RECORDER
REMOTE CONTROL UNIT
14 FADER (p.28,34)
Press to fade in or fade out
during playback or recording.
15 SKIP PLAY (p.28)
REC SYNCHRO
AB C D EF
1 2 3
GH I MN OJK L
4
5 6
7 8
10/0 >10
CURSOR
3
ENTER
7
SKIP ID
SET
CLEAR
MANUAL
¡
SELECTER
AUTO/
TEXTMARK
I
NPUT
18
19
20
9
¢
8
21
22
23
24
25
26
27
28
29
Press to switch skip play on
and off.
16 SKIP ID SET (p.29)
Instructs the player to skip a
particular track on playback.
17 SKIP ID CLEAR (p.29)
Clears the above setting.
18 SYNCHRO (p.19–21)
Press to start recording on
detection of an input signal.
19 AUTO/MANUAL (p.33)
Switches between automatic
and manual track numbering
when recording a disc.
20 Number / Letter buttons
(p.16,27,30)
Use to jump directly to
track numbers for
playback, selecting track
numbers for editing /
programming, and
selecting letters when
using CD text.
21 TEXT (p.30–32)
Use to cycle through CD text naming options.
22 >10 (p.16,27)
Use to select track numbers over 10.
¢¢
23
¢ (p.15)
¢¢
Press to skip forward tracks. Also performs
those operations assigned to turning the jog dial
(see page 12).
ØØ
24
Ø
ØØ
Press to skip forward index points.
25 NAME CLIP (p.32)
Press to copy the current CD text to the
recorder’s memory.
88
26
8 (p.15,22,26,37–38)
88
Press to pause playback or recording and start
finalization and erasing.
27 CHECK (p.27)
Press repeatedly to step through the program
playlist.
28 CLEAR (p.27)
Press to clear the last track in a programmed
playlist.
29 INPUT SELECTOR (p.19–24,36)
Switches between the analog, optical digital and
coaxial digital inputs.
13
3 Controls and Displays
312 456 7 8910
TOTAL
REMAIN
TIME
DISC
TRACK
ARTIST
ANALOG
OPTICAL
COAXIAL
TRK INDEX MIN SEC
50 32 18 12 6 2 0dBOVER
Display
1 CD text indicators(p.16)
DISC Lights up when disc information is
displayed.
TRACK Lights up when track information is
displayed.
ARTIST Lights up when artist information is
displayed.
2 TOTAL / REMAIN / TIME (p.17)
Indicates whether the current displayed time is
elapsed, remaining, or total time for a disc or
individual tracks.
3 Message/time display
4 FADER (p.28,34)
Blinks during fade in or fade out.
33
5
3 (p.15–16)
33
Lights up during playback.
88
8 (p.15,22)
88
Lights during play- or record-pause.
6 REC (p.22–25,34)
Lights up to when recording or record-paused.
Blinking display indicates record muting.
7 CD TEXT (p.15,30,31)
Lights if the CD currently loaded contains CD
text.
8 CD / CD–R / CD–RW (p.15)
Indicates the type of disc currently loaded.
9 FINALIZE (p.21,26)
Lights up if the CD-RW currently loaded has
been finalized. Also blinks during automatic
finalization recording (p.21,26).
10 SYNC / SYNC-1 (p.19–21)
Lights up when the recorder is in automatic
synchro recording mode.
11 AUTO TRK (p.33)
Lights when automatic track numbering is on
during recording.
CD TEXT
CD-RW
FINALIZE
SYNC-1
FADER
AUTO TRK
MANU TRK
SKIP ON
VOL
RPT-1
PGM
RDM
1112131415161719 1820
12 MANU TRK (p.34)
Lights up when manual track numbering is on
during recording.
13 SKIP ON (p.28)
Lights up to indicate that a disc contains skip
IDs. When setting or clearing skip IDs, the word
SKIP blinks.
14 PGM (p.27)
Lights up when program-play is active.
15 RDM (p.28)
Lights up when random-play is active.
16 RPT / RPT-1 (p.28)
Lights up when repeat play is active.
17 Recording level balance (p.16,23,25)
Displays the digital recording volume. If the
balance has been changed, the indicator (L or R)
of the louder channel lights up. Both indicators
light when the balance is unchanged. Track
numbers are displayed while using CD text.
18 OVER indicator (p.24)
Indicates that the input signal overloaded the
disc during recording.
19 Recording level meter (p.19–24)
Displays the input level during recording, or the
recorded level during playback.
20 ANALOG (p.19–24,37)
Lights when the analog input is selected.
OPTICAL (p.19–24,37)
Lights when the optical digital input is selected.
COAXIAL (p.19–24,37)
Lights when the coaxial digital input is selected.
14
4 Getting Started
Switching on for the first time
The next few pages take you
through switching on the CDR–
830, playing discs, and doing
some basic recording. Before
proceeding with this section you
should have at least connected
your recorder to a monitor
8
7
9
6
system. (If you haven't, turn to
pages 10–11 for more on
connecting the CDR–830 to other
items in your system.)
1 Switch the POWER to
__
_
__
ON.
The record indicator flashes, and
the main display panel lights up.
• Also make sure that you have
connected the output of the
CDR–830 to a monitor
system.
2 Press OPEN/CLOSE
00
0 to
00
open the disc tray.
3 Load a pre-recorded audio
CD.
Place the disc in the disc tray
label-side up.
• The disc tray has guides for
both CD singles (8cm) and
regular CDs (12cm). Do not
use an adaptor when playing
CD singles: it could damage
the recorder.
• Never load more than one disc
at a time.
4 Press OPEN/CLOSE
00
0 to
00
close the disc tray.
Once the recorder has found out
what is on the disc, the display
will show track and disc
information or, depending on the
disc, CD text.
If the disc does not contain CD
text, you should see a display that
looks something like this:
Number of tracks on disc
Total playing time
of disc
O3 45:37
Indicates a pre-recorded disc
• Pressing 3 (6 on the front
panel) will also close the disc
tray (but you won’t see the
above display).
CD
If the disc contains CD text, the
TEXT
indicator lights up and the
entire disc title automatically scrolls
across the display. The first 12
characters of the disc title remain,
as seen in the display below:
GREATEST HIT
You can switch CD text information
displays by pressing
See page 16 for more on CD text
displays.
Pressing
switch to the disc and track time
information displays.
See page 17 for more on time displays.
5 Press
DISPLAY allows you to
33
3 to start the disc
33
playing.
Pressing 6 or the jog dial on the
front panel also starts playback.
6 To pause playback, press
66
(or
6 again).
66
To resume playback, press either
8 again, or 3 (6). The recorder
only remains paused for 10
minutes, then enters stop mode.
7 To fast-reverse or fast-
forward, press and hold
11
1 or
11
¡¡
¡.
¡¡
8 To skip back or forward to
another track, press
¢¢
¢ (on the front panel,
¢¢
turn the jog dial).
Pressing ¢ once skips to the
start of the next track on the
disc. Further presses take you to
subsequent tracks.
Pressing 4 once takes you to
the beginning of the current
track. Further presses skip to the
start of previous tracks.
You can use 4 or ¢ while the
disc is paused or stopped as
well. The track number changes
while the disc remains paused/
stopped.
9 To skip back or forward
index markers, press
ØØ
Ø on the remote control.
ØØ
Because most CDs don’t have
index markers, you will generally
see 01 in the index display for
each track.
10 To stop playback, press
Take out the CD from the disc
tray before switching off the unit.
TITLE/MODE
CD TEXT
CD
44
4 or
44
øø
ø or
øø
77
7.
77
CD
.
88
8
88
15
Loading...